【Analysis Know-How.com】Creating Animation

Publication of an explanation of vector magnetic characteristic analysis technology for the realization of high-efficiency motors!

This document explains the vector magnetic characteristic analysis technology for achieving high-efficiency motors. This technology is supported by Professor Masato Enokizono (Emeritus Professor at Oita University, currently the representative of the Vector Magnetic Characteristic Technology Research Institute), and we have cited information from the Vector Magnetic Characteristic Technology Research Institute, which the professor leads. [Contents] 1. The target is the reduction of iron loss in electromagnetic steel sheets. 2. Iron loss is the sum of eddy current loss and hysteresis loss. 3. Vector magnetic characteristics of electromagnetic steel sheets. 4. Conventional measurements are scalar magnetic measurements. 5. Developed vector magnetic measurements. 6. Actual measurement results. 7. Database creation as magnetic characteristics. *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software

Supports low loss and high efficiency of EV motors! Capable of analyzing rotating magnetic fields and hysteresis.

"μ-E&S" is a iron loss analysis software that can simulate magnetic flux density, magnetic field, and iron loss distribution based on actual measurements of motor laminated cores. By analyzing vector magnetic characteristics, it can identify areas where iron loss occurs significantly, making it a useful analysis tool for reducing the size and weight of motors as well as for achieving low loss and high efficiency. 【Features】 ■ High-precision calculation of magnetic vectors ■ Capable of calculating rotating magnetic fields and hysteresis ■ Equipped with permanent magnet excitation function and torque calculation function *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software

Published on vector magnetic characteristic analysis technology for achieving high-efficiency motors!

This document is a technical column edited and compiled based on the content related to "Vector Magnetic Characteristic Analysis" mentioned in past newsletter columns. We would like to disseminate information on the importance of vector magnetic characteristic analysis technology for achieving high-efficiency motors. [Contents] ■1. Vector Magnetic Characteristic Analysis Technology - Prologue - ■2. Top Runner Method and IE4 ■3. Inverter Technology and Energy Saving ■4. Will Increasing Size Lead to IE3? ■5. Electrical Steel Sheets are Excellent ■6. Focus on the Vector Magnetic Characteristics of Electrical Steel Sheets *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

A basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors is presented!

This document presents a basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors. It provides a detailed explanation of the analysis model and objectives, as well as the magnetic flux lines, magnetic field distribution, and iron loss distribution results. [Contents] ■4.1 Analysis Model and Objectives ■4.2 Analysis Conditions and Calculation Time ■4.3 Magnetic Flux Lines, Magnetic Field Distribution, Iron Loss Distribution Results ■4.4 Results of Inclination Angle θB and Aspect Ratio α Distribution ■4.5 X-Direction Hysteresis Curve Results ■4.6 Y-Direction Hysteresis Curve Results ■4.7 Lissajous Waveform Results ■4.8 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a transformer model with directional materials is published!

This document presents an analysis example using a transformer model with directional materials. It provides detailed explanations of the analysis model and objectives, as well as the results of magnetic flux lines, magnetic field distribution, and iron loss distribution. [Contents] ■3.1 Analysis Model and Objectives ■3.2 Analysis Conditions and Calculation Time ■3.3 Results of Magnetic Flux Lines, Magnetic Field Distribution, and Iron Loss Distribution ■3.4 Results of Angle θB and Aspect Ratio α Distribution ■3.5 Results of Hysteresis Curve in the X Direction ■3.6 Results of Hysteresis Curve in the Y Direction ■3.7 Results of Lissajous Waveform ■3.9 Results of Current Waveform *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides detailed explanations about the ring model voltage source (differences in steel materials), magnetic field distribution, and iron loss distribution results. 【Contents】 ■2.1 Analysis Model and Objectives ■2.2 Analysis Conditions and Calculation Time ■2.3 Magnetic Field Distribution and Iron Loss Distribution Results ■2.4 X-Direction Hysteresis Curve Results ■2.5 Y-Direction Hysteresis Curve Results ■2.6 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides a detailed explanation of the ring model voltage source, as well as comparison results with measured hysteresis curves. 【Contents】 ■1.1 Analysis Model and Objectives ■1.2 Analysis Conditions and Calculation Time ■1.3 Magnetic Field Distribution and Iron Loss Distribution Results ■1.4 Alternating Magnetic Flux and Rotating Magnetic Field Results ■1.5 Comparison Results with Measured Hysteresis Curves ■1.6 Current Waveform Results ■1.7 Interface Settings Screen *For more details, please refer to the PDF document or feel free to contact us.*

• Other Software

Aiming for low loss, accurately measure the actual state of electromagnetic materials and understand and analyze their vector magnetic characteristics! Supporting low loss and high efficiency for motors used in EVs.

This is an introduction to the next-generation iron loss evaluation method, the "E&S Model." Based on an evaluation method called vector magnetic characteristics, it has become possible to obtain a more detailed loss distribution of steel materials as analysis results compared to conventional methods. It can calculate high-precision magnetic fields, magnetic flux densities, and iron loss distributions that are not achievable with other software. 【Features】 - By considering vector magnetic characteristics, magnetic vectors can be calculated with high precision. - Rotating magnetic fields and hysteresis can be calculated. - Finished as an easy-to-use tool specifically for iron loss evaluation. - Permanent magnet excitation function and torque calculation function. *For more details, please contact us or download the PDF.

• Scientific Calculation and Simulation Software

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacteria transmission in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus transmission by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing type "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, with the outbreak of infectious diseases, there has been a demand for products that cater to "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although automatic doors have been installed, they remain open due to people crossing frequently in busy areas. ☑ Touch switches have been introduced to reduce unnecessary openings and closings, but hygiene is a concern. ☑ Touch switches require regular battery replacements since they are powered. The light beam touch sensor "HA-T401" opens and closes automatic doors without contact, and its compact detection range makes it suitable for narrow passages and busy areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effects with two setting modes that reduce unnecessary openings and closings of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

Engineering Meetup Report is Now Available! We have published the event report from the AI Startup Engineering Meetup, held at Google for Startups Campus Tokyo. The event brought together four AI startups, where engineers and engineering leaders with backgrounds at major companies shared insights on: ◆Product development ◆Career journeys ◆AI-related initiatives Kort Valuta was represented by our Chief Operating Officer and a Backend Engineer, who shared perspectives on product development in the fintech industry and the unique development environment of a startup. The networking session that followed sparked meaningful conversations on technology and career development, creating valuable new connections among participants. At Kort Valuta, we will continue to value collaboration with the technology community while striving to build even better products. Read the event report: https://prtimes.jp/main/html/rd/p/000000126.000076589.html We're hiring! If you're interested in building the future of fintech with us, check out our careers page: https://recruit.kortvaluta.com/?utm_source=WEB&utm_medium=sns&utm_campaign=ipros

We have published a white paper titled "Half a Year of Procrastination vs. Full Operation in 3 Months - Conditions for Companies That Should Use Initial Setup Support," aimed at companies considering the introduction and operation of attendance management systems. This document clearly explains the key points of initial setup that are prone to difficulties during implementation, as well as the differences between handling it in-house and utilizing specialized support. If you want to smoothly launch an attendance management system, please take a look.