[Free viewing, pre-registration by March 10] We will introduce Primix's emulsification/dispersing/mixing equipment at the Japan Rubber Association online exhibition on March 17!

[Video available] A lab mixer that allows for the blade to rotate/revolve, achieving uniform mixing, kneading, and vacuum degassing! It also comes with a jacketed container for rapid heating/cooling.

Hibis Mix® uniformly mixes substances from low viscosity to ultra-high viscosity in a short time. It is an all-purpose stirrer (kneader, mixer) that can handle mixing, kneading, vacuum, heating, cooling, and more. The 2P-03 and 2P-1 models are test machines for research and development and small-scale production. They are very popular tabletop mixers that flexibly accommodate a wide range of mixing and kneading needs, with numerous successful scale-up cases to production machines. *The twisting blade of Hibis Mix® appears in the video below.

• others

[Video available] An ultra-high-speed multi-stirring system with a maximum rotation speed of 22,000 r/min! This is an emulsification and dispersion testing machine that can accommodate vacuum, continuous, and batch types.

Here are the appealing points of using the de facto standard emulsification and dispersion testing machine, Lab Solution(R), which consolidates evolution! ▼ ▼ ▼ ○ There are plenty of stirring options that can be easily swapped, making it easy to try various configurations during the initial investigation phase. ○ You can select the appropriate model based on the stirring purpose and the processing liquid. ○ The increased motor power allows you to confirm the load condition, providing peace of mind when increasing the rotation speed. Materials that were previously overloaded can be retested. ○ The temperature sensor is standard equipment, and the temperature is displayed on the operation panel, making it more convenient than testing with a separate thermometer.

• others

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

We will be exhibiting at Offshore Tech Japan (Marine Industry Technology Exhibition 2026) (Booth Number: 1S-S06). In this exhibition, we will introduce our services utilizing marine robots such as autonomous surface vehicles (ASVs) and underwater drones for marine surveys, seagrass bed surveys, ocean and wind condition surveys related to offshore wind power, and the collection of dead fish in aquaculture operations. Event Dates: January 28 (Wednesday) to January 30 (Friday), 2026 Location: Tokyo International Exhibition Center "Tokyo Big Sight," South Exhibition Hall, South 1 Hall (Koto City, Tokyo)