The effectiveness of the ultraviolet lamp installed in our company's ultraviolet sterilization products against the new coronavirus has been confirmed.

Lightweight and easy to carry! Small and easy to store! This is a compact lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. *Case studies are currently available.

With six features, it easily and safely disinfects indoor spaces with high efficiency using ultraviolet light. 1) Powerful Disinfection Ability: Uses the most powerful ultraviolet light (UVC) to inactivate viruses and bacteria, achieving a 99.9% reduction. 2) Purely Made in Japan: All aspects, including product planning, design, parts, and assembly, are safely made in Japan. It eliminates complex electronic devices, enhancing durability and usability for easy long-lasting operation. 3) Safe and Secure: Reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe use. 4) All-Around Disinfection: Equipped with four 15W disinfection lamps, it can disinfect spaces, air, and surfaces in a 360° area. It has a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance: The lamp has a lifespan of 6,000 hours, eliminating the need for frequent replacements. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time: Significantly reduces the burden of disinfecting floors and equipment and wiping cleaning tasks. ★ The effectiveness of the installed ultraviolet lamp against the novel coronavirus (Wuhan strain) has been confirmed. For detailed product information and experimental results, please check the PDF download.

• Special lighting

We will eliminate anxiety about viruses and bacteria, as well as infection risks, with the power of ultraviolet light.

We spoke with Mr. Mutsuki Sato, the director of the "Yamanashi Workers' Medical Association Isawa Kyoritsu Hospital," about the background of introducing the Sterilizing Trite. Isawa Kyoritsu Hospital has introduced and is operating four Sterilizing Trite units. This time, we have compiled an interview regarding the reasons for the purchase, the improvements made after the purchase, and the deciding factors for the purchase. Please download the catalog for more information.

• Special lighting

A lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. It is also easy to carry. Please use it for infection control, disinfection, and to reduce the time spent on sterilization tasks.

With six features, it easily and safely disinfects indoor spaces using high-efficiency ultraviolet light. 1) Powerful Disinfection It uses the most powerful ultraviolet light (UVC) for inactivating viruses and bacteria, ensuring strong disinfection power. *99.9% sterilization of viruses and bacteria. 2) Purely Made in Japan All aspects, including product planning, design, parts, and assembly, are safely made in Japan. It eliminates complex electronic devices, enhancing durability and usability. Easy and long-lasting. 3) Safe and Secure It reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe use. 4) All-Around Disinfection Equipped with four disinfection lamps, it can disinfect spaces, air, and surfaces in a 360° area. *It has a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance Lamp lifespan is 8,000 hours. Frequent lamp replacement is unnecessary. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time It significantly reduces the burden of disinfecting floors and equipment, as well as wiping cleaning tasks. Estimated disinfection times are: Approximately 15 minutes for a 6-tatami mat room. Approximately 20 minutes for an 8-tatami mat room. *For more details, please refer to the PDF document or feel free to contact us.

• Special lighting

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI

This time, I would like to talk a little about current measurement in the switching evaluation of power semiconductors (including power devices and power modules).

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.