What is "stage charging" in a battery charger? / I have summarized information about stage charging. Please check it out from the catalog download.

A compact battery charger suitable for various charging applications.

The "GC Series" is a charger that employs a "two-stage charging" method to achieve high efficiency and extend battery life. The two-stage charging consists of an initial charging phase and a float charging phase. It is used as an embedded unit in chargers and is incorporated into portable power units and UPS systems. 【Features】 ■ Two-stage charging method ■ Wide input voltage: AC90–264V ■ Wide temperature range: -30℃ to +60℃ ■ W testing conducted in Taiwan and Japan ■ Primary and secondary side insulation design ■ Various protective functions included *For more details, please refer to the PDF document or feel free to contact us.

• Batteries and Capacitors
• Other Batteries

A "tough charger" that endures even in harsh environments.

The HEP Series is a battery charger that supports a wide range of input voltages with a three-stage charging method. Despite being a "high-quality" charger with various functions and features, the HEP Series is also "tough." It is designed with an aluminum case filled with thermally conductive silicone, allowing it to withstand applications in environments where high temperatures, high humidity, dust, high vibration (10G), oil (including machine oil), steam, altitude, oil smoke, and corrosive gases may occur, making it widely adopted due to its toughness. It is equipped with a PFC power factor correction circuit. The output voltage and current can be adjusted via an internal potentiometer. 【Features】 ■ High efficiency of 93.5% to 95.5% ■ Equipped with PFC (Power Factor Correction) circuit ■ Output voltage and current adjustable via internal potentiometer ■ Aluminum housing with high heat dissipation effect ■ Suitable for lead-acid and lithium-ion batteries ■ Employs stage charging *For more details, please refer to the PDF document or feel free to contact us.

• Other Batteries

A compact battery charger capable of outputting 1600W with a high power density of up to 25W/inch³ and high efficiency.

The "RPB Series" is a compact battery charger capable of outputting 1600W with high efficiency and a maximum power density of 25W/inch³. By using communication protocols such as PMBus and CANBus, it can charge other types of batteries, including lithium-ion batteries. Additionally, the RPB-1600 has built-in protection circuit functions, ensuring safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with a PFC (Power Factor Correction) circuit for improved power factor - Forced cooling with a built-in DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, and battery reverse connection protection - Can be connected in parallel for a maximum of 4800W (2+1) - Built-in OR-ing FET *For more details, please refer to the PDF document or feel free to contact us.

• Other Batteries

By using the output program function, PMBus, and CANBus, it is possible to charge other types of batteries such as lithium-ion batteries!

The "RCB Series" is a 19-inch rack-mounted 1U (41mm) battery charger with a 1,600W output. By utilizing output program functions, PMBus, and CANBus, it can charge other types of batteries such as lithium-ion batteries. Additionally, the RCB-1600 has built-in protection circuit functions, ensuring safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with PFC (Power Factor Correction) circuit for improved power factor - Forced cooling with built-in DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, and battery reverse connection protection - 19-inch rack-mounted 1U, capable of redundant systems up to 8,000W - Built-in OR-ing FET and hot-swap (hot-plug) support *For more details, please refer to the PDF document or feel free to contact us.

• Other Batteries

The charger applicable to lead-acid batteries and lithium-ion batteries can be programmed according to the battery used. Operating temperature range: -30°C to +70°C.

The "ENC Series" battery charger is a desktop type battery charger that adopts a three-stage charging method. It is a charger applicable to lead-acid batteries (non-sealed, sealed, gel, AGM) and lithium-ion batteries (lithium iron phosphate, ternary lithium-ion batteries, etc.), and it can be programmed according to the type of battery used. Additionally, it has built-in protection circuit functions, ensuring safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts three-stage charging - Can be used in various countries with a wide input voltage range - Programmable charging method (optional item: SBP-001) - Remote ON/OFF control and built-in temperature sensor - Charging voltage can be set according to the type of battery - Over-voltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Maximum efficiency: 90.5% *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Other Batteries

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

PERI products are used at construction sites around the world. This time, we would like to introduce the construction work of the "Dunajec Road Bridge" spanning the Dunajec River in the town of Nowy Targ in southern Poland. The road bridge was planned to be constructed using a balanced cantilever method, dividing the cantilever beams starting from each pier into 10 segments. A particular concern was to strictly adhere to the concrete pouring cycle for each segment. To achieve this, a balanced cantilever carriage (VBC) equipped with a hydraulic advance system and an automatic formwork stripping function was adopted. By utilizing the VBC, it became possible to pour concrete for segments up to a maximum length of 5 meters in a single cycle, allowing for efficient and timely construction. PERI products: 1. TRIO Panel Formwork 2. VARIO GT24 Wall Formwork 3. PERI UP Flex Modular Scaffold 4. VST Heavy-Duty Shoring Tower PERI Japan Co., Ltd.

At a major purchasing specialty store located in Kanagawa Prefecture, we have introduced our commercial aroma diffuser rental service "MajestaFragrance," enhancing the store's atmosphere with fragrance. Installed models: MFmini (4,400 yen per month) × 2 units Adopted fragrance: Freesia Pear To ensure that customers visiting the store can relax during their appraisal and consultation time, we have implemented space branding with a "refined and approachable scent." The fragrance used is "Freesia Pear," which pleasantly spreads the freshness of fruity pear and the vibrant aroma of freesia. It warmly welcomes customers with a clean and high-quality scent. The "MFmini" introduced this time is a compact yet powerful diffuser known for its strong diffusion capabilities. It blends smartly into limited installation spaces such as reception counters and customer service areas, efficiently delivering fragrance. At Majesta Fragrance, we offer optimal diffuser models and fragrance suggestions tailored to the size of the store, type of business, and interior atmosphere. A "free trial installation" is also available before signing a contract.

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.