We will be exhibiting at "SEMICON Japan 2021 Hybrid."

Sample giveaway! For the holding and storage of precision parts and chips. Protects precision parts and allows for pickup even without a vacuum device!

The soft gel prevents damage during the transport of precision parts from vibrations and other factors. Since it does not use adhesive materials, there is no risk of glue transfer to the parts, and there is no concern about siloxane transfer as silicone is not used in the materials. 【Key Points of Gel Base】 ■ Non-silicone! There is no risk of transfer since silicone is not used in the materials. ■ No glue transfer to parts! A self-adhesive gel is used on the loading surface, and since no adhesive materials are used, there is no transfer of glue to the parts. ■ Anti-static treatment! Conductivity is imparted to the materials, preventing electrostatic damage to the parts. ■ Stackable trays and cases! Both cases and trays can be held, transported, and stored while stacked. ■ Can be picked up without a vacuum device! The cloudy mesh type has a surface with irregularities, allowing for pickup even without a vacuum device. *For more details, please download the materials or contact us through our website.

• others

Are you troubled by dirt on your fingertips while working? Simply grip to remove fine dust from the gloves. Can be reused by washing with water!

Tip remover is a fingertip adhesive gel designed to remove dirt and grease from gloves. It allows you to remove foreign substances attached to gloves without interrupting your workflow. Its hollow structure makes it easy to grip and fits well with your fingers. Gently rubbing it with your palm under running water will remove dirt and restore its adhesive power. ★Using a dedicated cleaner also allows for disinfection★ 【Important Points of Tip Remover】 ■ Easy-to-grip structure that effectively catches fine dust on fingertips! Made from soft gel material. Its hollow structure adheres closely to fingertips. ■ No silicone or plasticizers used in the materials. ■ No adhesive materials used! It utilizes the gel's self-adhesive properties to remove debris. It does not transfer glue to gloves and does not feel sticky. It can be installed in your preferred location, such as on a desk, wall, or ceiling, and can be removed as well. (Note: Installation may not be possible depending on the material of the surface.) ■ Wash away dirt with water! Can be washed thoroughly! When it gets dirty, washing it with water restores its adhesive properties, allowing for repeated use. Using a dedicated cleaner will also allow for disinfection. *For more details, please download and view the catalog.

• Sanitary fixtures

Hygiene management with peace of mind and safety! A sticky mat that can be washed and reused, effectively removing over 90% of dirt from shoe soles, ideal for preventing foreign matter contamination.

The step mat features a soft gel material that closely adheres to the fine grooves of shoe soles, capturing over 90% of hair and dust. It contains antibacterial and antifungal agents, making it safe for use in food factories where concerns about bacteria and mold growth are present! **Key Points of the Step Mat** - **Over 90% Removal Rate, Outperforming Traditional Adhesive Mats!** Traditional adhesive paper mats could not remove about 40% of debris, but the step mat's soft material adheres closely to shoe soles, allowing it to remove over 90% of dirt. *Note: Results from in-house ATP (+AMP) wipe tests.* - **Contains Antibacterial and Antifungal Agents!** It can be used safely in food factories where the growth of bacteria and mold is a concern. - **Washable to Remove Dirt! Reduces Running Costs!** The adhesive is restored with water wiping, allowing for repeated use. This contributes to reduced running costs and waste, supporting SDGs. - **Flame Retardant Standard UL94V-2 Equivalent Product** - **Suitable for Floor Coverage** It can be laid out in areas such as changing rooms and air showers, protecting important areas from contaminants. *For more details, please refer to the catalog.*

• Bathroom, shower, washbasin and toilet equipment

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room No. 12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities prepared. We look forward to welcoming everyone!

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools