(Free) Instron WEB Seminar Series: Static Testing Machine Series: Universal Material Testing Machines and Testing Methods for Medical Devices

Achieves high safety without compromising testing capacity! Supports various tensile, compression, and bending tests from low capacity (500N) to high capacity (300kN).

The "6800 Series" is a universal material testing machine designed to enhance safety levels more than ever before, protecting operators, testing machines, and test specimens without placing a burden on testing processing capabilities. The lineup has been further enriched with the addition of high-capacity (100kN, 300kN) floor-mounted models! 【Safety Enhancement Features】 ■ Operator Protection ■ Test Status Display via Indicator ■ Smart Close Air Circuit 【Advanced Testing Functions】 ■ Synchronized Data Sampling at Speeds up to 5kHz ■ Latest Handset ■ Latest Features Linked with Dedicated Software Bluehill Universal 【Customizability】 ■ Wide Range of Accessories ■ Custom Frames (Width and Height Extensions) *Please feel free to contact us for more details.

• Other measuring instruments

Introduction of application examples for material testing of surgical products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. Hospital and surgical products are often consumables designed for single use by patients. Catheters, guidewires, venous lines, tubes, and wound closure products such as bandages, sutures, and staples all fall into this category. Mechanical testing of these products is particularly important to ensure that characteristics such as appropriate tensile strength, low friction, and sufficient elongation are suitable for their intended use. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

We provide a fixture package to test all 10 items of ISO11040-4!

Pre-filled syringes are generally tested according to ISO 11040-4. Glass syringes are more susceptible to breakage than plastic syringes, so a wider variety of tests are required based on ISO 11040-4. There are a total of 10 annexes within ISO 11040-4, each requiring different testing methods. Some of the annexes require rotational motion, so the "ISO 11040-4 fixture" is designed to be compatible with simple tensile, compression, and Torsion Add-On (twisting additional option) systems. [Strengths of Instron Testing Machines (Partial)] ■ The fixtures are designed to conduct various tests with minimal fixtures. ■ The fixtures adopt a modular design to minimize the number of necessary parts. ■ Instron's service department supports the introduction of testing machines. ■ Reduces operator training time. *For more details, please refer to the PDF document or feel free to contact us.

• others

Provides traceability for inconsistent data! Compatible with new and existing systems.

We would like to introduce the traceability feature of our software, "Bluehill Universal." This feature allows users to meet the audit requirements related to FDA 21 CFR Part 11, ISO 17025, Nadcap, A2LA, and other certification texts. By incorporating electronic signatures and approvals, file revision history, and automated secure audit trails, this powerful additional feature provides traceability for non-conforming data. 【Traceability Features】 ■ Bluehill Security ■ Revision History ■ Electronic Signatures ■ Audit Trails *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Introducing application examples of material testing for parts and components of medical products, as well as final products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. In many cases, mechanical testing of pharmaceutical products consists of tests for pill crushing, hard and flexible package testing, syringes, auto-injectors, and vials, as well as testing of drug delivery systems such as inhalers and transdermal patches. Mechanical testing of these products is particularly important to ensure characteristics such as appropriate dosage, drug delivery time, package integrity, and safety requirements of the package, such as child-proof opening mechanisms. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

It is a testing machine with a space-saving design that allows for the simulation of the twisting characteristics of products in real-use environments, thereby reducing the time required for product development.

The latest Torsion Add-On 3.0 is designed to enhance laboratory capabilities by allowing simple axial and torsion tests to be conducted with a single unit, as an option for the desktop models of the 6800 series and 5900 series. It expands product development capabilities and can simulate applications under actual use conditions. Many international testing standards, such as ISO11040-4, ISO80369, and ASTM F543, require control in both axial and torsional directions, making it possible to consolidate the necessary functions into one unit and streamline the testing process. It is ideal for testing the performance of various consumer products, packaging products, medical products, electronic devices, and automotive parts. ◆Features Simulates the product's actual use environment Enhances product development speed Saves laboratory space

• Other measuring instruments

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html

We are pleased to announce that JP Generators Co., Ltd. will be exhibiting at the 47th Joint Disaster Prevention Drill of the Nine Prefectures and Cities, which will be held on September 1, 2026 (Tuesday) at the Kanagawa venue, titled "Big Rescue Kanagawa." About Big Rescue Kanagawa: Big Rescue Kanagawa is a practical comprehensive disaster prevention drill focused on medical rescue activities, conducted in cooperation with Kanagawa Prefecture and Atsugi City, along with medical and disaster prevention organizations, at the Kanagawa venue of the Joint Disaster Prevention Drill of the Nine Prefectures and Cities. In addition to rescue training, we will have many opportunities for learning about disaster prevention through various exhibits and hands-on experiences. Our company will also be participating in this comprehensive disaster prevention drill. ▼ The exhibited product will be the "Vehicle-mounted Generator | G-STREAM." We sincerely look forward to your visit.

Chugai Commerce Co., Ltd. will be exhibiting at the "Extreme Heat Tech - Technology Exhibition for Heatwave Measures" held at Makuhari Messe. This exhibition is a specialized event focused on heatwave measures for various fields such as architecture, construction, manufacturing, logistics, infrastructure, and events. We look forward to your visit.

Announcement of a co-hosted seminar with Live Consulting Inc. "Practical Seminar on Microsoft Copilot for Manufacturing Executives and Managers" "The new AI tools are no longer needed." This seminar allows you to experience Microsoft Copilot, which can be used directly within your usual Word, Excel, and Teams, through a demonstration of the actual operating screen. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection or new investments, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, aimed at executives and managers in the manufacturing industry. We sincerely look forward to your participation. [Recommended for] - Manufacturing executives and managers who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Those who want to see the "actual screen" rather than just "reading" first - Those who cannot use ChatGPT in their company due to security concerns