We will be exhibiting at the 7th Railway Technology Exhibition 2021 Mass-Trans Innovation Japan 2021 from November 24 to 26, 2021.

3D scanning measurement made faster and simpler! A 3D measurement system for railway infrastructure.

The "IMS5000" is a high-performance 3D & IMU measurement system that enables 3D scanning measurements to be conducted faster and with simpler operations compared to previous 3D measurements. It is equipped with a high-performance IMU (Inertial Measurement Unit) that has a proven track record in track measurement products, integrated into the cutting-edge 3D measurement system "GRP5000." The data collected after measurement can be reviewed at any time using the dedicated software "Amberg Rail." 【Features】 ■ The cutting-edge 3D measurement system "GRP5000" is equipped with a high-performance IMU. ■ Achieves faster measurements with simpler operations compared to previous 3D measurements. ■ The high-performance IMU is adopted by railways in many countries. ■ Data collected after measurement can be reviewed at any time using the dedicated software "Amberg Rail." ■ Management of construction limits is also possible! ■ Linear data of the track can also be output! *For more details, please refer to the PDF document or feel free to contact us.

• others

You can freely set the string length for high and low frequencies! Both short and long wavelengths can be measured in a single measurement.

The "IMS Relative" is a measuring device primarily aimed at relative measurements such as "alignment" and "elevation." Based on absolute linear measurement methods, it allows for higher precision measurements compared to conventional methods that use approximation or estimation formulas. By equipping it with suitable functions and a specially developed IMU (Inertial Measurement Unit), it provides the required performance while keeping costs down. 【Features】 ■ Freely settable chord lengths for alignment and elevation ■ Capable of obtaining both short and long wavelengths in a single measurement ■ High-precision measurements possible even for long wavelengths ■ Adjustment work before measurement can be done by simply stopping for 2 minutes, applicable in both straight and curved sections ■ Simple structure allows for easy assembly ■ Additional laser measuring devices can be added to measure the absolute displacement of the track *For more details, please refer to the PDF document or feel free to contact us.

• others

A new system for investigating the state of the orbit! Measurements will be conducted with a minimum of two people in a small group and in a short time.

The "IMS3000" is a measuring device that performs absolute measurements of the track while moving along the orbit. This product replaces traditional surveying equipment (total stations) with an advanced technology IMU (Inertial Measurement Unit), enabling measurements to be taken in a simpler manner. The measurement speed is up to 4 km/h, allowing for measurements to be conducted by a minimum of two people in a short time, with the ability to confirm the results on-site. 【Features】 ■ Equipped with an IMU (Inertial Measurement Unit) for simpler measurement methods ■ Conducts measurements with a minimum of two people in a short time, allowing for on-site result confirmation ■ Capable of measuring many items that cannot be obtained through conventional track displacement measurements ■ Simple operation method ■ Allows for confirmation of track displacement (gauge, level, left-right alignment, left-right elevation, flatness, etc.) from the measured data *For more details, please refer to the PDF document or feel free to contact us.

• others

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!