(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Proposal for Updating Fatigue Testing Machines with the Latest 8800MT Controller Features and Fatigue Testing Software.

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

"WaveMatrix" utilizes self-heating control software for test specimens to optimize test frequency, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperature. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency fluctuations. [Features] - User-defined temperature range (controllable up to ±0.5°C) - User-defined frequency range - Thermocouple data input via USB is possible - Analog input of 0-10V for thermocouple data, including infrared thermometer data, is possible - Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for hydraulic oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static, dynamic, and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. Depending on the application, we offer a lineup of uniaxial systems up to 10kN and 100Nm, as well as linear/torsion (biaxial) options. There are three sizes available for selection based on your needs. Our product meets your testing requirements in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustments.

The "ElectroPuls 16 Station" is a testing system that significantly reduces testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The adoption of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors on the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operable on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on a single-phase power supply and does not require additional utilities (such as compressed air, hydraulic pressure, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The "E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, dual-axis Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Separate linear/rotary actuators ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating above 100Hz ■ Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

A variety of hydraulic servo test systems with different capacities and applications, along with a wealth of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• Other measuring instruments

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology (patented) that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

This is a notice for the rebroadcast of the co-hosted seminar with Live Consulting Co., Ltd. held on September 11 and 15, 2026. "The New AI Tools Are No Longer Needed" This seminar allows participants to experience Microsoft Copilot, which can be used directly within familiar Word, Excel, and Teams, through a demonstration of actual operating screens. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, aimed at executives and managers in the manufacturing industry. We sincerely look forward to your participation. 【Recommended for】 - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Those who prefer to see "actual screens" rather than just "reading" before making a decision - Those who are concerned about security and cannot use ChatGPT in their company

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" using physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.

In recent years, weather risks that affect construction sites, such as localized heavy rain, strong winds, and extreme heat, have been increasing. In response to this situation, more companies are implementing weather information services at the company or branch level to manage weather risks across multiple sites collectively. On the other hand, is there a challenge where "the company checks weather information, but it is not used much on-site"? To implement weather measures across the entire company, it is important not only for managers to easily grasp multiple sites but also for the personnel working on-site to be able to easily check the information necessary for their specific site. We are releasing a new feature called "Field View." For more details, please visit our website.

In recent years, weather risks such as localized heavy rain, strong winds, and extreme heat that affect construction sites have been increasing. In response to this situation, more companies are adopting weather information services at the company or branch level to manage weather risks across multiple sites collectively. On the other hand, is there a challenge where "the company checks weather information, but it is not used much on-site"? To implement weather measures across the entire company, it is important not only for managers to easily grasp multiple sites but also for the personnel working on-site to be able to easily check the information necessary for their specific site. We are releasing a new feature called "Field View." For more details, please visit our website.

In recent years, weather risks such as localized heavy rain, strong winds, and extreme heat that affect construction sites have been increasing. In response to this situation, more companies are introducing weather information services at the company or branch level to collectively manage weather risks across multiple sites. On the other hand, is there a challenge where "the company checks weather information, but it is not used much on-site"? To implement weather measures across the entire company, it is important not only for managers to easily grasp multiple sites but also for the personnel actually working on-site to be able to easily check the information necessary for their specific site. We are releasing a new feature called "Field View." For more details, please visit our website.