Notice of Participation in the 4th Coating Japan (Paint and Coating Equipment Exhibition) from December 8 to 10, 2021.

Portable probe-integrated thickness gauge

Portable probe-integrated dual-type thickness gauge Automatically identifies and measures base metals Can measure in dark places with backlight FN type is single-function, Pro type is high-function Pro type features measurement value and calibration curve memory function, data transfer to PC - Measurement method: Electromagnetic and eddy current dual-use - Measurement range: 0–900μm to 2.5mm (ferrous base) 2.0mm (non-ferrous metal base) - Measurement accuracy: ±1μm or ±3% - Display method: LCD digital - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional function: Switchable display of 0.1μm (for measurements under 100μm)

• Other measuring instruments

Probe-integrated model for iron base only

This is a pocket-sized digital thickness gauge with an integrated probe and main unit. Zero and standard adjustments are easily done with a one-touch button. Its lightweight, palm-sized body and simple key layout allow for easy one-handed operation. - Measurement method: Electromagnetic induction - Measurement range: 0 to 999μm to 2.5mm - Measurement accuracy: 0 to 100μm; ±1μm or ±2% of the indicated value 101 to 2.5mm ±2% of the indicated value - Display method: LCD, display hold - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional features: Backlight switch, auto power-off switch, range switch for 0.1μm display (for less than 100μm)

• Other measuring instruments

Measuring the coating thickness on metal and non-metal substrates.

- Measures the film thickness of paint, lacquer, and plastic layers on plastic, metal, wood, glass, and ceramic substrates. - Can measure the film thickness of up to 5 layers at once in a non-destructive manner. - Can also measure the coating thickness on fiber-reinforced plastics such as GFRP (glass fiber reinforced plastic) and CFRP (carbon fiber reinforced plastic). - Displays waveform images on the main unit's LCD using A-scan.

• Other measuring instruments

Efficient and cost-effective measurement of coating, plating, and lining thickness. Built-in printer, capable of recording up to 20,000 measurement values.

The "CTR-2000V" is a digital thickness gauge suitable for non-destructive measurement of insulating coatings and linings on ferrous substrates, as well as non-magnetic metal coatings. It can be easily operated with a Japanese key and allows for the registration of up to 10 calibration curves. With a large memory capacity that can record up to 20,000 measurement points, it enables smooth measurement and recording tasks by a single person, even for multi-point measurements such as on bridges. 【Features】 ■ Wide measurement range of 0 to 2000μm ■ Built-in statistical function and printer for immediate output of statistical results ■ Capability to categorize recorded content into blocks ■ Upper and lower limit setting function, with alarm feature *For more details, please refer to the materials available for download in PDF format or feel free to contact us.

• Measurement and Inspection

Intuitive and easy to understand! The best-selling analog thickness gauge has undergone a full model change!

The "Pro-S/Pro-W" is an electromagnetic thickness gauge that non-destructively measures the thickness of insulating coatings and linings on iron substrates, as well as non-magnetic metal coatings such as plating. It adopts a two-point calibration method that complies with the standards, internal regulations, and criteria of various public corporations, organizations, government offices, research institutes, and various corporations in Japan, as well as international standards such as ASTM and ISO. It supports a wide range from 0 to 5mm, accommodating everything from thin film coatings to linings. 【Features】 ■ Traditional analog meter type ■ Compact body ■ 0 to 5mm wide range ■ Special magnetic pole probe ■ Dial cover included as standard *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

When observation of the condition is necessary.

The readability is significantly improved due to the motor cutting in a funnel shape. Complies with ISO 2808, ASTM D4138, and DIN 50 986. *There is also model 518 with a CCD camera mounted on the microscope section.

• Other measuring instruments

Precision type

Measures the wet film thickness of paints, inks, varnishes, adhesives, oil films, resin coatings, etc., on metal substrates. Complies with JIS K5600-1-7, ISO 2808, and ASTM D1212.

• Other measuring instruments

You can easily and quickly check the feasibility of anti-corrosion coatings for bridges, ships, steel towers, plants, etc. (in accordance with JIS Z 0313) PSPC compliant.

This is a surface salinity meter that allows for easy and rapid measurement of salt deposits on surfaces. Steel structures need to be cleaned before painting. In particular, the salt concentration is very important as an indicator of cleanliness before painting, especially for corrosion prevention. It easily and directly measures the salt deposits on the surfaces of steel structures such as ships, bridges, and large tanks using three different methods.

• Other measuring instruments

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.