We will sell the product "Mini Cactus," which can lower the alarm water level for the pressure drainage system "SaniSpeed Plus." (Effective for leaks during malfunctions)

The "Mini Cactus" has been introduced as a low water level alarm device for the Sunny Speed Plus! It is possible to lower the alarm water level to 150 mm.

The Sanispeed Plus has an option called the "SaniSensor/SaniAlarm," which is a full water alarm device designed to prevent water leakage in case of a malfunction. When connecting drainage fixtures with low overflow edges, such as refrigerated showcase drain lines or indirect drainage, there may be instances where water overflows from the fixture before the alarm is triggered. In such cases, using a mini cactus can lower the alarm water level. <Usage Precautions> - Please do not wash with more than 10 liters temporarily to avoid false alarms. - Do not use detergents with concentrations higher than those specified by the manufacturer. - Please install the discharge pipe with a diameter of 25A. - This product is exclusively for Sanispeed Plus. *For inquiries or orders regarding the mini cactus, please feel free to contact us.

• pump

In response to the requests of Japanese users, we have prepared three alarm devices for the French-made Sanipump to ensure safer and more secure use!

In the unlikely event that an abnormal water level or other issues occur within the main body of the sanitary pump, you can quickly detect the abnormal water level by using the following optional products. Additionally, we have prepared three alarm devices that add electrical functions to the manufacturer's standard battery-operated alarm, in addition to the standard products. This allows for the transmission of signals to an external alarm panel in case of abnormalities. ■α1 Sanisensor (Nickname: Escargot) …Detects abnormal water levels within the main body and sends a signal to an external alarm panel (sold separately). …Applicable models: Sanispeed Plus, Sanaccess 3 ■α2 Electrode Rod (Nickname: Water Strider) …Two electrode rods detect abnormal water levels and send a signal to the alarm panel (sold separately). …Applicable model: Sanicubic ◇ Sanialarm (Manufacturer's standard product) …A battery-operated alarm that detects abnormal water levels within the main body and alerts with an alarm sound. …Applicable models: Sanispeed Plus, Sanaccess 3 *For inquiries or orders regarding the additional "abnormal water level alarm devices," please feel free to contact us.

• pump

Toilets, washbasins, and mini kitchens can be installed in places where drainage slopes cannot be achieved! Increased design flexibility for water-related areas.

The "Sanipump" is a pump-assisted drainage system that allows for the installation of water facilities in places where "it is difficult to achieve drainage gradients" and "the distance from the shared vertical pipe is far." It can easily meet needs such as wanting a toilet in the basement or adding a toilet, washbasin, or mini kitchen near the bedroom of an elderly person. It is also possible to install refrigerated showcases in places where drainage is not possible. You are freed from the constraints of drainage gradients, greatly increasing design flexibility! 【We also offer our "original options" alarm devices!】 　◎ Remote pressure detection "SaniSensor" (for SaniSpeed Plus and SaniAccess 3) 　◎ Electrode type "Electrode Rod (nickname: Amenbo)" (for SaniCubic) Both detect abnormal water levels and send signals to the alarm panel. 【Examples of installation】 ■ Buildings ■ Commercial facilities ■ Hospitals and clinics ■ Supermarkets and convenience stores ■ Train stations and in-station stores ■ Factories ■ Residential areas on slopes ■ Underground of apartments … and more, products can be selected according to usage and installation conditions. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• pump

Attendance management is something that is expected of every company and should be addressed. When asked, "Are you doing it?" it might be more concerning to hear, "Are you doing it correctly?" which could make some responsible parties feel anxious. You may be using time cards for clocking in, but are unsure about overtime calculations. You might be having employees input data into Excel, but how does that stand in terms of legal compliance? You may be managing paid leave on paper, but there’s no room for double-checking. Employee resignations may be ongoing, but could this be due to overwork...? Why not review the various pros and cons of different attendance management methods and revisit the important aspects of attendance management from the "basics"?

Stamp duty, which can be a significant cost in contract operations... By switching to electronic contracts, you can reduce this cost. PDF files of contracts used in electronic contracts do not fall under taxable documents according to the Stamp Duty Act. Therefore, by switching to electronic contracts, the need for physical stamps is eliminated. ◆ "Electronic Contracts" Without Worrying About Stamp Duty When using electronic contracts, there is no stamp duty. Electronic contracts can prove "authenticity" and "non-repudiation" through electronic signatures using electronic certificates and timestamps from certified service providers. * Electronic Signature: Ensures authenticity through email addresses, identification, and certificates of registered matters. * Certified Service Provider Timestamp: Proves that the document "existed" at that time and in that state, confirming that it has "not been tampered with." ◆ For inquiries about electronic contract services, contact paperlogic! "paperlogic Electronic Contract" is a cloud service specialized in electronic contracts and document management. It can be used not only for managing estimates and invoices but also for electronic contracts using witness-type (equivalent to a registered seal) and party-type (equivalent to a personal seal). Additionally, we offer consulting plans for DX, so please feel free to contact us.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Castem Co., Ltd. will exhibit at "Mechatrotech Japan 2025," which will be held at Port Messe Nagoya from October 22 (Wednesday) to October 25 (Friday), 2025. In the themed exhibition zone titled "Processing Techniques Supporting Healthcare," we will showcase a miniature model of a laparoscopic surgical instrument (forceps) that has been meticulously crafted. In collaboration with ROKKO Smart Technology Co., Ltd., we will demonstrate the mold processing of the finest components of this miniature model using the ultra-high precision high-speed micro-machining machine "Android3." Attendees will have the opportunity to directly experience the "technological prowess embedded in the microscopic world." We invite you to stop by during this special occasion! 【Exhibition Overview】 Date: October 22 (Wednesday) to October 25 (Saturday), 2025, 10:00 AM to 5:00 PM Venue: Port Messe Nagoya (2-2 Kinjo Futo, Minato Ward, Nagoya City) Exhibition Location: 3rd Exhibition Hall, Concept Zone A Content: Organizer's planned exhibition "Machining Live! Processing Techniques Supporting Healthcare - Learning Success Tips from Different Industries -" - Display of a laparoscopic surgical set approximately 95 mm in length - Demonstration of mold processing using Android3 and seminar - Display of other miniature products, MIM products, digital cast products, etc.

At the Osaka-Kansai Expo, the "K.L.V" (Kinetic Light Vision) displayed at the Shiga Prefecture booth in the Kansai Pavilion won the Gold Award in the Entertainment Space category of the "Japan Spatial Design Award 2025." For "K.L.V," our control controller was used to manage the translucent acrylic spheres suspended by wires. The control controller achieved control of 450 motors connected via EtherCAT at a cycle of 4 milliseconds. There is an actual video in the related links section. https://prtimes.jp/main/html/rd/p/000000018.000026058.html