We will be exhibiting at the "Construction Technology Exhibition 2021 Kinki" from October 27 (Wednesday) to 28 (Thursday)! [Ended]

High-strength carbon fiber "Gaina CF Sheet" demonstrates significant reinforcement and repair effects on concrete structures without applying any load.

The Gain CF Sheet Method is a technique that involves applying carbon fiber sheets treated with high adhesive penetration to concrete structures for the repair and reinforcement of tunnels. It has passed tests for "flammability, self-extinguishing properties, and the safety of emitted gases," making it suitable for use within tunnels. Additionally, the sheets are treated for high penetration and, when combined with a specialized adhesive, exhibit excellent adhesive performance. This helps to prevent the sheets from peeling during construction, ensuring safe installation. There are two types of sheets with different weaves: the "CR" type, primarily used for fall prevention, which incorporates carbon fibers woven in both vertical and horizontal directions, and the "UD" type, designed for reinforcement, which aligns carbon fibers in one direction. With the addition of the UD300, which has a weight of 300g/m², alongside the existing UD200 and CR200 (both with a weight of 200g/m²), the application range of the Gain CF Sheet Method has expanded.

• Renovation and repair methods

Inspection is possible just by placing the probe on the designated part of the anchor! A non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors.

The (HAWK) Anchor Checker is a non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors. It allows for inspection simply by placing the probe on the designated part of the anchor, making it a product that can be tested in a shorter time compared to pull-out tests. Additionally, while the sound testing method may yield varying results due to surrounding noise or the skill of the tester, the Anchor Checker establishes thresholds based on the measured values of anchors in good installation condition, ensuring consistent evaluations. (Note: This does not guarantee the pull-out resistance of post-installed anchors.) 【Features】 ■ Lightweight and Compact: It is lightweight and compact, allowing for space-saving inspections. ■ Non-destructive: Since inspection is conducted simply by placing the probe, it does not affect the anchor or the structure. ■ Easy Inspection: It does not require complex operations, enabling quick inspection and determination. ■ Fair Evaluation: It automatically performs quantitative assessments based on pre-set thresholds. *For more details, please download the PDF or contact us.

• Civil Engineering Company

We propose a system that excels in construction and inspection to prevent third-party damage caused by falling objects!

At K.F.C. Co., Ltd., we handle preventive maintenance technology using anchors, known as the "Fail-Safe System." Our unique creation, the "Hawk Tie Wire Anchor Z," is a post-installed anchor that integrates the wire connection and the main body through a single molding process. It is suitable for fail-safe applications in disaster prevention equipment such as sprinklers and water supply pipes. Additionally, we offer the "Torsion Nut" to prevent human error. We also have the "Hawk Stopper Drill," which enhances the quality of construction during anchor installation. 【Product Lineup】 ■ Hawk Tie Wire Anchor Z Type I ■ Hawk Tie Wire Anchor Z Type II (with shackle) ■ Hawk Tie Wire Anchor Z Type III ■ Hawk Tie Wire Anchor CN (with shackle) ■ Hawk Kakutei Tie Wire Anchor (with shackle) ■ Tie Wire Coupling (stainless steel) ■ Hawk Kakutei Anchor ■ Safety Anchor ■ Torsion Nut K/ZK ■ Hawk Stopper Drill *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables
• Work tools

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.