Simple Type Water Stop Board Flood Guard F FZ80

Lightweight and sturdy ABS material. Can be installed quickly and easily, providing excellent water-stopping effect.

"Flood Guard F" is a simple water barrier designed to prevent flooding caused by typhoons and sudden heavy rain. Made of lightweight and high-strength ABS, it can be installed quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" allows adjustment of the length from end to end for the best fit ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *Catalogs and case studies are available for download as a PDF. Please feel free to contact us for inquiries.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. You can use a combination of four different shapes.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends such as typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can create a 30-degree angle on the inside with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FN50 Weight (kg): 3.7 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can be set at an angle of 30 degrees outward with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends of typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FW50 Weight (kg): 3.1 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

"Flood prevention measures against typhoons and guerrilla heavy rain" Easy installation without tools. By overlapping the protruding parts of the two connected units, they can be easily connected straight.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By closely adhering the water stop board to the wall, damage at water-prone areas is reduced.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. ■FG50 R/L Weight (kg): 4.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 ■FGL50 R/L Weight (kg): 4.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Used for fine adjustments of the installation width.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from typhoons and sudden heavy rains, which have been on the rise in recent years. By installing a sponge and water stop rubber, it significantly reduces leakage. Thanks to its slide structure, the external width can be adjusted within the range of 560 to 705 mm. ■FT50 Weight (kg): 6.6 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Integrated with the main water stop board, dramatically reducing water leakage damage.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. The side seal is a product used in combination with "Flood Guard F" to further reduce leakage. ■ FS50 Side Seal Weight (kg): 1.5 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Disaster prevention! Flood prevention! "Flood Guard F" is a water barrier that can be easily installed!

Are you prepared for potential water disasters? It is difficult to predict where water damage, such as river flooding or heavy rain, will occur. Our new type of simple water stop board, "Flood Guard F," is easy to carry, resistant to being swept away by strong currents, and durable enough to withstand impacts from debris. Additionally, it is an environmentally friendly material recycling product (3R product) that emphasizes Reduce (high durability), Reuse (reusability), and Recycle (recycling). *For more details, please download the PDF or feel free to contact us.

• Disaster prevention supplies

By using the "fitting bar," you can reduce water leakage!

We would like to introduce our "Fitting Bar" that we handle. The water stop board uses the walls at both ends to prevent water intrusion. However, the ground and walls are often not at right angles, which can create gaps between the water stop board and the walls. Additionally, the water pressure on the wall side of the water stop board is lower compared to the bottom, which can lead to inefficient compression of the water stop rubber and water stop packing, resulting in leaks. Therefore, the Flood Guard F uses the "Fitting Bar." Compared to conventional products, the water stop capability has been significantly improved. 【Features】 ■ When using FG that utilizes the side walls for water stopping, there are no gaps. ■ When using FS that utilizes the back wall for water stopping, there are no gaps, enhancing the water stop effect. ■ By aligning FG, it is also possible to accommodate "steps." ■ The water stop capability has been significantly improved compared to conventional products. *For more details, please refer to the PDF materials or feel free to contact us.

• Water stop

We have published an introduction document for the solution "Easy Commuting Expenses," which supports the efficiency of commuting expense management. This document clearly presents the features and benefits of "Easy Commuting Expenses," which enables centralized management of commuting costs, including train, bus, and private car commuting. It streamlines tasks that place a heavy burden on staff, such as determining commuting routes, calculating refunds for commuter passes, responding to fare changes, and managing payment histories, while supporting fair and appropriate commuting expense reimbursements. Additionally, it includes case studies based on the implementation results from over 650 companies nationwide, as well as the effects of cost reduction and operational efficiency. Companies considering a review of commuting expense management or business improvements are encouraged to take a look.

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.