Recommended for infection control! Introduction of non-contact sensors for facilities.

An automatic door sensor that opens only for people who want to enter without contact, whether on a busy street or in a narrow passageway.

Energy-saving measures and infection control! Upgrade your facility environment with a non-contact light touch sensor! The 'HA-T401' can be configured to match the usage environment with four settings for the touch area: left, center, right, and a total of 12 spots in four configurations. You can open and close automatic doors just by bringing your hand close, making it hygienic and safe without any contact. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Four spot settings to adapt to various door types ■ Non-contact solution to hygiene issues ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Door Accessories
• Security Sensor Systems

It's hygienic because you can open and close the door just by waving your hand without directly touching the doorknob or switch!

The "Exposed Waterproof Non-Contact Beam Switch for Automatic Doors PF-R5" is a hand-sensor that easily adjusts fine angle settings, and opens and closes the door when the beam of the built-in switch is obstructed. It is suitable for hygienic environments such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact - Three patterns of beam switches: front, downward, and left/right - Waterproof and dustproof (IP55 design) - Arrow mark indicates where to wave your hand - Can be mounted on a power switch box For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

A non-contact switch of the exposed downward wide type that can open and close automatic doors by waving a hand without touching the main body.

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria infection. The "PF-R4" is an easy-to-use exposed downward wide-type hand-sensing sensor. By placing your hand under the sensor, you can open and close the door. It is suitable for places that require hygiene considerations, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

A built-in horizontal type non-contact switch that can open and close automatic doors by waving a hand without touching the main body.

You can open and close doors without directly touching doorknobs or switches, reducing the risk of viral infection in places where hygiene is a concern, such as food processing facilities and hospitals. The "PF-U2" is an exposed type horizontal hand-sensing sensor. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

A non-contact switch of the exposed front-facing type that can open and close automatic doors by waving a hand without touching the body.

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacterial infection. The "PF-R1" is a front-facing type of hand-sensing sensor. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

It's hygienic because you can open and close the door without directly touching the doorknob or switch—just by waving your hand! Avoid the risk of infection from viruses and bacteria!

The "Microwave Non-Contact Switch DHS-2 for Automatic Doors" is a microwave hand-sensing sensor that allows you to open and close doors simply by waving your hand. It is suitable for places that prioritize hygiene, such as food factories, hospitals, and nursing facilities. 【Features】 - Reduces the risk of virus infection as doors can be opened and closed without contact. - The adoption of microwave technology significantly reduces malfunctions caused by condensation in environments with temperature differences, such as cold storage. - Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water. *Note: The wall surface (back side) is not applicable. - LED display and response sound allow for easy confirmation of detection status at a glance. For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

Just stepping into the entrance allows for automatic door opening and closing! Recommended for places where hygiene is a concern, such as food processing factories and restaurant kitchens!

It is a non-contact switch that allows you to operate and open/close automatic doors with your feet, freeing up both hands and ensuring excellent hygiene. The "PF-01S" is a slim vertical beam type foot switch with a wide opening. Its slim design allows for the installation of two foot switches at the same height, both inside and outside. The stainless steel panel is highly water-resistant and chemical-resistant, making it hygienic. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

Even with large surgical room sandals, the toes can open and close automatic doors! A thin, wide-opening footswitch of the side light type that excels in hygiene.

The "PF-03S" is a slim switch that allows you to open and close automatic doors simply by placing your foot at the entrance. Since it is operated with your feet, both hands are free to use, making it recommended for use in places that prioritize hygiene, such as food factories, restaurants, and medical facilities where keeping hands clean is important. The stainless steel panel is excellent in water resistance and chemical resistance, ensuring hygiene. The "PF-03S" features a slim design, allowing for the installation of two foot switches at the same height, both inside and outside. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

Standard foot switch with side light type, excellent in hygiene.

This is a slim switch that allows you to operate and open/close automatic doors with your feet, keeping both hands free and excelling in hygiene. The stainless steel panel is highly water-resistant and chemical-resistant, making it hygienic. The "PF-05" is a standard foot switch of the horizontal beam type. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

Deep learning fast facial recognition! Facial recognition speed under 0.2 seconds, facial recognition accuracy over 99%!

The "DS Series" is a high-speed facial recognition device that achieves faster facial recognition with high accuracy. Facial recognition speed is under 0.2 seconds, with an accuracy of over 99%! It can be used in various locations such as medical facilities, public facilities, environmental facilities, educational institutions, and office buildings, reducing the risk of virus and bacteria transmission as an entry and exit system. You can choose from three types according to your location and purpose. ■ Product Lineup 【Facial Recognition Terminal DS342】 - High-speed facial recognition with deep learning - Compact smartphone size - Supports mask recognition 【Facial Recognition Terminal (Felica compatible) DS372F】 - High-speed facial recognition with deep learning! Equipped with a Felica card reader - 7-inch tablet size ◎ For more details, please download the catalog or contact us.

• Security cameras and surveillance systems
• Entrance/exit management and personal identification system
• Entrance and exit control system

Just by waving your hand over the sensor, the disinfectant is automatically sprayed. By linking it with the automatic door, thorough hand disinfection is achieved!

The "PHW-03B" is an automatic liquid spray dispenser that detects when a hand is extended and sprays disinfectant. When combined with a wireless touch switch, it can wirelessly link to automatic doors. When the liquid is sprayed, a signal is sent to open the automatic door, ensuring thorough hand sanitization. 【Features】 ● The number of liquid sprays can be selected to either one or two. ● Compatible bottle size: Maximum approximately D85×W95×H185–250mm. You can use both the dedicated bottle and your own bottles. ● Recommended for entrances to restrooms in food-related facilities and factories where hygiene management is required. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Entrance/Exit Gate System

Unlike conventional mat-type sensors, this is a floor sensor that is less likely to be avoided by users because the detection area is not visible.

"Just Place It Pole-kun" is an infrared reflection type floor sensor that can adapt to various environments. When the individual gets out of bed, it notifies via a nurse call. Because it is wireless, it reduces the risk of cable disconnection and leaving the detection range. It is also less likely to detect curtain movements or bedding overflow, thus minimizing false alarms. 【Mat Sensor】 The individual may try to avoid it, which actually increases the risk of falling. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the individual. - Installation is complete just by placing it! It has a simple design with only two operation switches. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables
• others

"Why does back-office work take so much effort?" you might wonder, yet you have no time or leeway. Furthermore, are you feeling pressured by the expectation of "handling everything without mistakes"? Even when you finally muster the courage to say, "Let's implement a system!" and start moving forward, you may find yourself exhausted by the process of requesting materials, comparing options, and attending demos (about an hour per company...), leading you to pause and ask, "Which one is actually right for our company?" This is a common reality. Additionally, after implementation, you might encounter situations like "I didn't check the support system, and now I can't call for help when I need it" or "After introducing multiple systems, I lost track of who to contact in case of trouble," leading to the feeling of "This isn't what I expected." If you're feeling stuck in such a situation... In this column, we focus specifically on the back-office departments of "General Affairs, Labor, and Management Planning," and based on the voices and trends we've heard through our daily proposal activities, we will introduce the "Top 5 Common Problem-Solving Cases." You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/38885

The quality of lighting poles is significantly related not only to their aesthetic appeal but also to safety and durability. Since these products are exposed to wind, rain, and UV rays outdoors, it is crucial to process the materials accurately and join them while maintaining strength. Laser cutting is characterized by its ability to precisely process complex shapes and fine holes based on CAD data, while minimizing burrs and dimensional errors on the cut surfaces. When the components fit together accurately, it leads to improved assembly precision and overall product finish. Additionally, laser welding is a technique that can firmly join metals while minimizing distortion and deformation caused by heat. However, to achieve high-quality processing, it is essential not only to have the performance of the equipment but also the knowledge and experience of technicians to set conditions according to the materials and shapes. What specific benefits do laser cutting and laser welding provide to support the safety and durability of lighting poles? On the homepage of Kando Industry, you can find a more detailed explanation of the importance of laser processing in the production of lighting poles. For more details, please refer to the related link.

Thank you for your continued support of Panorama Memo. We would like to inform you about our support "Summer Holiday Schedule." Holiday Period: August 8, 2026 (Saturday) to August 16, 2026 (Sunday) Responses to inquiries received during the above period will be addressed sequentially starting from August 17, 2026 (Monday). We appreciate your understanding and cooperation.

We have introduced Majesta Fragrance to a cabaret club located in Yokohama, enhancing the atmosphere with scent throughout the establishment. This time, to deliver the fragrance evenly across the entire floor, we have installed the 'MF-02S' in both the main floor and the VIP room. From the first impression upon opening the door to the special time spent at the table, we have created a space where you can feel an exquisite sense of relaxation and luxury. The chosen fragrance is "Freesia Pear." The sweet freshness of European pear combined with the transparent notes of freesia creates an elegant and vibrant impression. Just like customer service and interior design, the "scent of the space" is an important factor that determines the prestige of the establishment. Majesta Fragrance also offers free trial installations. If you are interested in enhancing the scent of your space, please feel free to contact us.

To expand the strengths of Japanese cosmetics globally and achieve sustainable growth, it is essential to address not only quality and safety but also compliance with regulations in various countries and supply chain management concerning environmental and human rights issues. This seminar, co-hosted with Intertek Testing Services Japan, a global comprehensive quality assurance provider, will clearly explain practical points regarding country regulations, as well as human rights and environmental risk management with specific examples such as palm oil and mica. ▼ For details and registration, please visit here For details of the seminar and to register, please see the URL below. Participation in person is limited to the first 30 applicants, so we look forward to your prompt registration. <Contact Information> Japan Cosmetic Center, General Incorporated Association, Contact: Fujioka TEL: 0955-53-8700 E-mail: event@jcc-k.com Intertek Testing Services Japan, Contact: Inaba TEL: 03-4571-1510 E-mail: sachio-inaba@intertek.com