Drainage treatment facility UV disinfection device 'OSUV Series'

Disinfection with ultraviolet light! One-pass, short-time sterilization! A safe and secure wastewater treatment system that takes into account the environment of the release destination.

The water that we discharge from our work and daily life goes through sewage treatment plants, purification centers, and agricultural and fishing village drainage facilities (combined treatment tanks), and is ultimately released into rivers, lakes, and the sea. Traditionally, many wastewater treatment facilities have used chlorine disinfection; however, concerns about residual chlorine in the discharged water, disinfection by-products such as trihalomethanes and organic chlorine compounds, and environmental hormones have raised voices of concern about the negative impact on the ecosystems of fish and wildlife living in the discharge areas such as rivers and seas. This has led to a reconsideration of safer disinfection methods. In recent years, ultraviolet (UV) disinfection has been introduced as an alternative technology to traditional chlorine disinfection. This method uses UV lamps that emit UV-C wavelengths with strong sterilizing effects for disinfection. It has no residual effects, is effective against all types of bacteria including E. coli, and is a highly safe device that can disinfect in a single pass and in a short time. Additionally, it eliminates the daily management tasks of chemical replenishment, concentration management, and dosage adjustment. [Facilities for Introduction] ■ Sewage treatment plants and purification centers ■ Agricultural and fishing village wastewater treatment facilities ■ Factories and industrial wastewater treatment facilities ■ Wastewater reuse facilities such as combined treatment tanks ■ Treatment facilities for gray water such as rainwater *For more details, please download the PDF or contact us.

• Water Treatment Plant
• Sewerage facilities
• Water treatment technology and systems

An article about the resin-based lightweight formwork system "PERI DUO" has been published in the "Construction News" (November 7, 2025)! "PERI DUO" is a new system formwork made of resin that can be used for walls. It is made from a newly developed material called "Politec," which is high-strength and lightweight. With fewer components, it is easy to handle. It allows for increased reuse and is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components and easy to handle ■ 100% recyclable *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

【New Product Announcement】 UV - Ultra-Compact Irradiator LSP26FUV Series Released High intensity yet compact, a palm-sized cube-type ultra-compact UV irradiator. It offers a variety of UV wavelengths and can be used for a wide range of applications. Due to its compact size that fits in the palm of your hand, it is very convenient for simple inspections and research experiments, as well as other small tasks. *Details about the product features and specifications are currently being prepared. They will be published soon, so please wait a little longer. For more information, please feel free to contact us.

Japan Aluminum Co., Ltd. will exhibit at the High-Performance Materials Week "Adhesive and Joining EXPO" ~Proposing solutions for joining aluminum and resin~ This exhibition is one of the events that make up the "High-Performance Materials Week," which features cutting-edge material technologies, and is one of the largest comprehensive exhibitions in Japan for adhesives, joining machines, and fastening technologies. The Japan Aluminum Group will showcase various functional surface treatments currently under development, focusing on the joining solution PAL-fit for aluminum and resin. We sincerely look forward to your visit and hope you take this opportunity to see our offerings. https://www.nikkeikinholdings.co.jp/news/news/p2025110501hd.html Event Dates: November 12 (Wed) to 14 (Fri), 2025 10:00 AM to 6:00 PM (Ends at 5:00 PM on the final day) Venue: Makuhari Messe Hall 7 (Chiba City, Chiba Prefecture) Our Booth: Hall 7, 42-26

In recent years, with the increasing push for DX (digital transformation) and valuable feedback from all users in the field, we will be fully renewing "Compass PLUS." The new Compass PLUS will leverage its traditional strengths while completely revamping its design, functionality, and usability, thereby further enhancing its value in practical use. The official release is as follows, so please wait a little longer until then. 1) Improved visibility and operability 2) Enhanced intuitiveness 3) Streamlined information sharing These are the main points of improvement, and it will be available starting December 16, 2025. For an overview of the renewal, please download the materials. We are also planning an online briefing session, so please download the materials for more details as well. Renewal date: Tuesday, December 16, 2025 Temporary suspension period: Monday, December 15, 2025, 17:00 – 19:00 *Due to the renewal, data updates for observation devices (wave height, weather, water level, noise and vibration) will be suspended during the temporary suspension period. However, viewing of forecast information and other various information will still be possible as usual.