We have uploaded an introduction video for the software 'TaVCal', which can significantly cut down the process of liquid level measurement.

Consistent support from sensors to the entire system and software development! Featuring five case studies.

This document is a collection of case studies that introduces examples of solving problems using the experience we have cultivated with IT and sensing technology. We can provide consistent support from sensors to the entire system and software development, allowing us to grasp the overall picture together and develop accordingly. Please take a moment to read it. 【Featured Cases】 ■ Want to improve delivery efficiency ■ Want to prevent pump troubles by streamlining tank liquid level measurement operations ■ Want to achieve operational efficiency in tank liquid level measurement ■ Achieving operational efficiency in tank liquid level measurement tasks and accurate measurements ■ Want to measure air pressure in a negative pressure compartment on board a ship *This document can be viewed via "PDF Download." We also offer a comprehensive catalog of liquid level measurement devices and monitoring systems.

• Scientific Calculation and Simulation Software

Automatic calculation and recording, and forms can be created with the push of a button! Here is an introduction to a liquid level gauge case study.

We would like to introduce a case that solved the issue of wanting to improve the efficiency of tank liquid level measurement operations. Previously, all tasks from liquid level measurement inside the tank to capacity calculations, and even record-keeping and tax office submission documents, were done by hand, which took a lot of time. To address this, we implemented tank capacity calculation software (Tank App). This software allows for automatic calculations and records, and reports can be generated with the push of a button, significantly reducing the time spent on tank calculations and document preparation. [Overview] ■ Case: Sake Tank ■ Issue: Wanting to improve the efficiency of tank liquid level measurement operations ■ Proposed Product: Tank Capacity Calculation Software (Tank App) - No time-consuming bookkeeping or calculations - Time saved can be used for other tasks - If tank data is in digital format, it can be automatically read *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software

Reduced conventional measurement time by approximately 75%! A case where the liquid level was accurately measured without reacting to the foam.

We would like to introduce a case study that addresses the challenges of improving the efficiency of tank liquid level measurement operations and achieving accurate measurements. In the fuel tank, bubbles formed on the liquid surface, and when measured with conventional scales, the height of the bubbles was also counted, resulting in overpayment for fuel costs. To solve this, we introduced the smart sounding scale "Honesty." It does not react to bubbles, allowing for accurate measurement of the liquid level, and it reduced the conventional measurement time by approximately 75%. [Overview] ■ Case Study: Marine Fuel Tank ■ Challenge: Improving the efficiency of tank liquid level measurement operations and achieving accurate measurements ■ Proposed Product: Smart Sounding Scale "Honesty" - The sensor at the tip of the measuring device does not react to bubbles, accurately capturing the actual liquid level. - There are already over 1,000 units delivered, installed on more than 500 vessels. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK