We have released the waterproof 20A connector 'HR41 harness'.

Compact high performance! Widely meets connector needs around power supply for industrial equipment.

The "EnerBee series" is a power cable connector that improves assembly quality and work efficiency. In addition to the advantages of being "compact" and "supporting high voltage and high current," it features a "complete lock" function, widely addressing connector needs in industrial equipment power supplies. For example, by switching from your current product to our compact high-performance product, you can achieve space savings and improved specifications. By eliminating the need for a lock release space required by side locks, it enables high-density mounting, contributing to space savings on the circuit board. 【Features】 ■ Center lock mechanism: Contributes to space savings on the circuit board ■ Key compatibility: Safe design ■ Potting compatibility: Protects the mounted parts from water and foreign substances (dust, organisms, etc.) ■ Vertical mating cable side exit structure: Clear click feel and excellent operability ■ Multi-point contact structure: Reliable contact and high vibration resistance ■ Sequence structure: Ground terminal contacts first *For more details, please refer to the PDF document or feel free to contact us.

• others

For those troubled by water ingress and foreign object intrusion in connectors! Introducing a compact yet high-performance waterproof connector.

The "LF Series" is an ultra-compact waterproof connector featuring short lengths, 3 to 20 pins, IP68 waterproof performance, robustness, and high-speed signal compatibility. Most conventional waterproof connectors are of the "screw lock" type, where the coupling nut is threaded, requiring manual tightening. This can lead to uncertainty about how far to turn it during mating, and if the screw connection is not tightened properly, it may allow water ingress. Our product utilizes a "bayonet" lock that achieves proper mating with just a half turn, and you simply turn it until you hear a click. There is no need to apply force, and since it does not rely on screws for tightening, it will not loosen due to vibrations. **Features** - Easy operation for mating even in hard-to-see areas - Easy mating even while wearing gloves - Compact design with up to 20 pins - Compact yet capable of handling high currents up to 10A - Compact and easy to connect to industrial sensors and more *For more details, please refer to the PDF document or feel free to contact us.*

• others

It can be used for noise countermeasures and LAN! It has IP68 waterproof performance. It can be processed from a single dedicated braided weather-resistant cable.

The "LF Harness" is a waterproof connector compatible with small sizes and shielding. The cable's shield braid is grounded to the connector shell, enabling high-speed transmission. It has waterproof performance of IP67 and IP68 when mated. Additionally, it supports both soldering and crimping connections, with automatic crimping available for cost reduction. We also have dedicated equipment for crimping multi-pole 20-core types, so please feel free to consult us. 【Features】 ■ Compact, shielded, and high-speed compatible ■ Waterproof performance of IP67 and IP68 when mated ■ LF dedicated cables: 4-core and 20-core cables are in stock Other core counts can also be accommodated (minimum length = 100m) ■ Can utilize your existing cables *For more details, please refer to the PDF document or feel free to contact us.

• Other park materials
• others

Weather resistance test cleared! Suitable for outdoor use with IP68 waterproof performance. Dedicated cables are in stock, and we accept processing from just one unit.

The "HR30 Harness" is a small, lightweight waterproof plastic connector. It maintains waterproof performance of IP67 and IP68 when mated. We process it using a dedicated jig for installation, ensuring reliable quality. Additionally, it can accommodate overmolded types (cable can be integrally molded). We offer custom options to meet your needs. We also have 3m connectors with terminals in stock. Please feel free to consult us when needed. 【Features】 ■ Small and lightweight ■ Waterproof = IP68 ■ Dedicated wire stock available ■ Harness processing *For more details, please refer to the PDF document or feel free to contact us.

• Other park materials
• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

What do the members of the back office department consider when choosing or replacing a system? If the same product is handled by both a "manufacturer" and a "distributor," how do you feel about it? "Distributor"? Isn't it cheaper to buy directly from the manufacturer? It's obvious that receiving direct service is better, right? ...Is that really the case? In the materials we are releasing this time, we will explain the benefits of "introducing a distributor." Here’s a preview of the materials: 【If you’re going to choose, you should leverage the power of a distributor that handles the ○○ system!】 【Make the distributor your ○○○○○○○ and use them to the fullest!】 Along with these points, we are offering a "Distributor Evaluation Checklist" that will be your strong ally, free of charge! Please make good use of it.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.