We have published the product page for a large-capacity, compact industrial storage system compatible with ZEB.

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system that corresponds to the operation of the storage system defined in the resilience ZEB demonstration project. ■ It is expected that the introduction costs can be reduced with subsidies limited to public facilities. A project to promote the introduction of autonomous and decentralized energy facilities, etc., that simultaneously realizes regional resilience and decarbonization for evacuation facilities and others. Support for the introduction of renewable energy generation and storage systems to public facilities (evacuation facilities, disaster prevention bases, etc.) positioned as evacuation facilities during disasters. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities, one-half for municipalities' solar power generation and cogeneration systems, and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, equipped with a stainless steel casing and IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other Batteries
• Power and Energy Equipment
• Other Smart Grid

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its PV compatibility, allowing the PV power converter to operate independently during power outages without going into self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal times, it allows for efficient electricity use through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

Ideal for realizing a resilient society! Contributes to CO2 reduction and significantly reduces energy consumption through energy creation.

The industrial storage battery system <BLP> corresponds to the operation of the storage system defined in the Resilience ZEB demonstration project. Our industrial storage battery system contributes to the realization of planning that integrates environmental and crisis management, as well as efficient equipment operation and energy solutions aimed at ZEB. By combining solar power generation and storage batteries, we effectively utilize renewable energy sources. This contributes to CO2 reduction and significantly decreases energy consumption through energy creation. Furthermore, in the event of a power outage due to a disaster, surplus electricity can be used, enabling autonomous energy security. 【Features】 ■ Effectively utilize renewable energy sources by combining solar power generation and storage batteries ■ Contribute to CO2 reduction (support efforts for decarbonization) ■ Significantly reduce energy consumption through energy creation ■ Enable "autonomous energy security" by using surplus electricity in the event of a power outage ■ Suitable for realizing a resilient society *For more details, please refer to the PDF materials or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Other Smart Grid

This is a large-capacity industrial storage battery with a three-phase connection, output of 30kW, and 73.7kWh, ensuring a reliable power supply even during prolonged power outages!

In order to promptly execute the BCP during a disaster, it is necessary to secure a minimum level of infrastructure. Connex Systems' industrial storage system can be used for power equipment such as water supply pumps with a three-phase, three-wire output of 30kW. By incorporating a transformer, it can also support single-phase devices like lighting, televisions, and air conditioning, making it possible to back up commercial refrigerators and industrial pumps. Additionally, with a large capacity of 73.7kWh, this storage system/battery can reliably supply power even during prolonged outages. [Installation Locations] ■ Apartments and Offices Power outages that may occur due to disasters can also lead to simultaneous water supply interruptions in apartments. This is because electric pumps are used to send water to the upper floors. Such systems are widely used in various facilities, from buildings and hotels to food factories, and can be considered one of the critical devices that would cause trouble if they stop during a disaster. Connex Systems' industrial storage battery can supply electricity to three-phase power sources with an output of 30kW, allowing for the backup of three-phase devices such as electric pumps. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Other Batteries
• Power and Energy Equipment

Introducing industrial storage batteries for BCP measures in locations that can serve as disaster prevention bases or evacuation centers during emergencies! (National Resilience)

Abandoned schools and roadside stations are gaining attention as evacuation sites and disaster prevention hubs for residents during emergencies. By installing industrial storage battery systems at these disaster prevention hubs, the disaster resilience of the community can be enhanced. When solar power generation is introduced simultaneously, it is possible to supply power to specific loads from the generated electricity and the capacity of this product, allowing for response to long-term power outages. It can be installed in a compact outdoor design that does not require housing, saving space. 【Installation Locations】 ■ Public facilities, government buildings, community centers, schools, elderly care facilities, roadside stations, commercial facilities, supermarkets, etc. 【Achieving Disaster Preparedness and Energy Savings with Industrial Storage Batteries】 By combining solar power generation and storage batteries, natural energy sources can be effectively utilized. This can lead to benefits such as reducing CO2 emissions and fulfilling corporate social responsibility (CSR), adding value to energy savings and business continuity planning (BCP) measures. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Batteries and Capacitors
• Power and Energy Equipment

A compact outdoor installation type that does not require housing storage!

The industrial energy storage system from Connex Systems, the BLP, is an outdoor installation type that can accommodate both emergency power supply and daily self-consumption. It is an industrial energy storage system that contributes to BCP measures for public facilities and businesses, as well as to reducing environmental impact and supporting local communities. This compact outdoor installation integrates the PCS and battery enclosure, contributing to space-saving. The system is suitable for BCP applications, allowing for a reasonable increase in capacity as needed during emergencies. 【Features】 - Compact outdoor installation that integrates the PCS and battery enclosure - Contributes to space-saving - Rated output of 30 kW / storage capacity of approximately 73.7 kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - A system well-suited for BCP applications With an output of 30 kW, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Power and Energy Equipment

Cost reduction and reduction of environmental impact! Control the "maximum demand" and contribute to reducing electricity costs. Reliable BCP and power outage measures with solar power generation equipment and batteries!

Are you struggling with energy-saving measures for warehouses, factories, or large commercial facilities? - Rising electricity costs - Rising fuel costs - Specific energy-saving strategies, etc. As the demand for more efficient energy use and management increases, the introduction of storage batteries is highly effective for energy-saving measures in warehouses and factories. When combined with solar power generation, it becomes an effective solution for reducing facility costs, addressing environmental impact issues, and disaster preparedness. It also serves as an effective means of ESG investment, contributing to the enhancement of corporate value. The introduction of industrial storage systems, when combined with solar power generation, is very effective as an energy-saving measure for facilities and contributes to reducing electricity costs. By enforcing discharge during peak usage times, it controls "maximum demand," helping to reduce electricity costs. Additionally, with scheduled settings, charging and discharging of generated power can be done by time zone, achieving peak shift effects. [Implementation Locations] - Environmental measures and energy-saving applications for factories, warehouses, and large commercial facilities. *For more details, please refer to the PDF document or feel free to contact us.*

• Solar power generation equipment
• Solar power generation
• Other Batteries

Caught up in daily data entry, approvals, and inquiries, I want to improve but can't find the time to consider it. Such voices from the field are not uncommon. Even though it's clear that systemization is necessary, the reality is that people often get stuck on where to start and which products to choose. Common frustrations include "I spent time requesting materials and demos, but I'm not sure if it fits my company," and "After implementation, the inquiry contacts are scattered among different manufacturers, making it hard to connect quickly when issues arise." This moves us further away from the original goals of efficiency and reducing dependency on individuals. This is where the option of "agent implementation" comes into focus. Agents that handle products from multiple manufacturers have the advantage of providing unbiased comparisons and neutral proposals without favoring specific products. Even within the same category of systems, they can present the pros and cons side by side for a balanced evaluation. There is also a common misconception regarding pricing; in most cases, there is little to no price difference between direct sales from manufacturers and agents. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33869

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Kort Valuta Inc. is pleased to announce that FiNC Technologies Co., Ltd. has adopted TwooCa, our next-generation corporate wallet solution. The implementation was initiated as part of discussions for a potential business alliance. FiNC is currently utilizing TwooCa’s internal campaign feature to enhance employee communication and increase awareness and engagement with the platform across the organization. ■ Key Initiatives Internal employee campaigns powered by TwooCa Enhanced communication among employees Increased awareness and adoption of TwooCa within the company Promotion of employee benefits digital transformation (DX) TwooCa is a corporate wallet platform that brings together health, employee benefits, and digital payments into a single solution, helping organizations address workplace challenges while creating new value for both employers and employees. Kort Valuta will continue working with organizations and partners to deliver innovative solutions that combine health, employee benefits, and digital payments, driving the next generation of employee benefits DX. Click here for the press release https://prtimes.jp/main/html/rd/p/000000128.000076589.html

Recently, products that imitate the design and mechanism of our company's products have been circulating in the market. These imitation products have no relation to our company and significantly differ in terms of quality and safety standards. The Magiline Pool is an innovative pool manufactured by Piscines Magiline in France, which has obtained 90 international patents. Our company is the official general importer in Japan. Since our establishment in 1994, we have a track record of over 50,000 installations in 35 countries worldwide, and our quality is recognized by the French origin guarantee label. We cannot provide repairs or after-sales service for imitation products purchased through unauthorized channels. To ensure that our customers can use the Magiline Pool safely and for a long time, we kindly ask that you purchase it from our company or from authorized dealers nationwide. If you have any questions, please feel free to contact us at the address below. • Contact: pool@prosper-d.co.jp We appreciate your continued support of the Magiline Pool.

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at Idemitsu Plant Tech Chiba Co., Ltd. ~ In the case of Idemitsu Plant Tech Chiba ~ Before the introduction, there was a challenge to reduce the time spent on circulating and storing paper documents, as well as the approval process (including rejections). The decision to implement "Rakuraku Seisan" was made considering its proven track record in group companies and the cost benefits it offers. With the system in place, manual errors in data entry and accounting software have clearly decreased. The payment process for invoices used to take a total of 7 hours per month, but it can now be completed in just 4 hours. [Case Overview] ■ Challenges before implementation - Reduce the time spent on circulating and storing paper documents, as well as the approval process (including rejections). ■ Key points of implementation - Peace of mind due to proven track record in group companies. *For more details, please refer to the related links or feel free to contact us.