★New Product★ [Kumamoto Red Cross Hospital, GK Design, Kawakami Industries Joint Development] Foldable Lightweight Resin High-Performance Simple Temporary Partition System (Infection Control, Privacy Space Assurance)

Bubble wrap not only has cushioning properties but also excels in insulation. It can be used as supplementary supplies for evacuation life, such as "laying on the floor," "sticking to windows," and "providing warmth."

Normally used as packaging material, 'bubble wrap' can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during such times. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and alleviates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

Light and easy! A plastic pearl partition that can be assembled without tools.

"Plantation" is a lightweight, portable, and easy-to-assemble partition made of Plapearl. It is ideal for simple partitioning, design-oriented display setups, privacy screens in emergency shelters, and outdoor display panels. 【Features】 - Weighs about half compared to typical aluminum partitions - Easy to assemble without tools - Excellent water resistance, suitable for outdoor use - Available in a wide variety of sizes, colors, and thicknesses - Made entirely of recyclable polypropylene - Resistant to water and can be disinfected with alcohol. For more details, please refer to the catalog or feel free to contact us.

• partition
• Basement unit/disaster prevention shelter
• Disaster prevention supplies

■Partition (divider) made of lightweight plastic board ■Made of plastic, can be disinfected by wiping with alcohol and other substances

This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ■ By connecting the panels, you can create partitions. Depending on how they are connected, it allows for flexible layout changes. ■ Size settings comply with the guidelines of the Shelter and Evacuation Life Society. Internal dimensions: 1840×1840×height 1450 mm External dimensions: 2000×2000×height 1450 mm Panel size: 762×1450 Set contents: 11 panels, 20 connecting parts ■ Easy to assemble without tools. ■ Made of plastic, it can be reused repeatedly. It does not absorb moisture or water, allowing for long-term storage, and can be disinfected with alcohol. ■ By partitioning the space, it prevents droplet infection and protects privacy. *For more details, please refer to the PDF document or feel free to contact us.

• Other commercial buildings and service facilities
• partition
• Disaster prevention supplies

Lightweight plastic board simple bed ■ Moisture-resistant and suitable for long-term storage Compact storage ■ Reusable and economical ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed. ■ When not in use, it can be stored compactly, not taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ It is compatible with alcohol disinfection and sterilization, allowing you to keep it clean at all times. ■ Jointly developed with the Saitama City General Affairs Bureau Crisis Management Department Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Lightweight plastic board simple bed ■ Moisture-resistant and suitable for long-term storage Compact storage ■ Reusable and economical ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Speed Set Type★ This type has fewer parts and can be assembled in a short time. ■ When not in use, it can be stored compactly, not taking up much storage space. ■ Assembly time is about 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not degrade when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing you to keep it clean at all times. ■ Jointly developed with the Nagoya City Nakagawa Ward Office, Administrative Division. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Lightweight plastic board simple bed ■ Moisture-resistant and suitable for long-term storage Compact storage ■ Reusable and economical ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plapal" manufactured by Kawakami Sangyo Co., Ltd. ★Multi-type★ The top board is divided into three parts, allowing it to be used not only as a bed but also as a desk or chair. ■ When not in use, it can be stored compactly without taking up storage space. ■ Assembly time is about 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Safety Division of Sakai Town, Ibaraki Prefecture. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Thank you for your continued support. On February 18, 2026, we will release the comprehensive weather platform ZEROSAI X-AI. Our strength lies in the ability to integrate AI for wind speed forecasting, weather observation, environmental data, and hazard notifications, in line with traditional pinpoint weather forecasting. On the same day, we will also release a cloud-managed dust meter as a new option for the comprehensive marine platform Compass PLUS. For more details, please visit our website.

We have prepared a product catalog for the high-performance sound-absorbing material brand Ecophon. This catalog clearly summarizes a diverse lineup of products designed to enhance the acoustic quality of spaces, featuring photographs, case studies, and sound absorption performance graphs. "When sound changes, the space changes." Ecophon's sound-absorbing materials are designed to improve comfort in various settings, including offices, educational institutions, medical facilities, and commercial spaces. In this catalog, you can find detailed information on the features, specifications, and design variations of each product. You can contact us through the inquiry form on the official Ecophon website to download it for free. We hope it will be useful for your space creation and sound environment improvement considerations.

When buying new cosmetics, while the bottle design is important, what catches the eye first is definitely the "box." When faced with a selection of many cosmetics and unsure of which to choose, it often comes down to making a "package purchase," similar to impulse buying based on the cover. This time, we asked our long-time partner, the cosmetics manufacturer Kurecos Co., Ltd., why they continue to create packages with Kaypack. 【I can hardly remember when we started working with Kaypack】 We began our dealings with Mr. Kita (Kaypack) over 20 years ago, so long ago that I can hardly remember the beginning. In the early days, we relied on another packaging company. However, since starting our relationship with Mr. Kita (Kaypack), we have entrusted the majority of our packaging production to them. There is a mutual understanding developed over our long relationship, and the sense of security that comes from knowing they understand everything makes it easy to request work from them. There is a level of stability that allows us to build trust.

The "Hybrid Joint TCF Type" is a bridge expansion device designed for the Tohoku region that responds to "compacted snow," which occurs due to vehicle traffic after snowfall. It meets the 10kN snow load standard set by the Tohoku Regional Development Bureau. Additionally, it adopts a structure known as the "face plate type," which ensures that the water-stopping material does not become exposed on the surface, and it comes standard with "secondary water-stopping material." By employing a double structure, it reduces the risk of leakage and achieves higher water-stopping performance. Furthermore, to prevent snowplow blades from getting caught on the expansion device, it also comes standard with a "snow removal guide plate." This not only protects the product itself but also considers safety during snow removal operations.

Castem Co., Ltd. and Castem Global Group's Castem Vietnam held a completion ceremony for the newly established Vietnam factory in Quang Ninh Province, Northern Vietnam, in January 2026. This is the first time our group has expanded into Vietnam, and this factory will be our seventh overseas production base. After the planned second phase of construction, it is expected to become the largest production base in the group in the future. The factory will manufacture lost-wax precision casting parts used in semiconductors, precision machinery, and construction machinery. We chose Vietnam, where economic growth is anticipated, as a new production base for our main business of lost-wax precision casting. Currently, we are advancing prototype production and plan to start mass production by the end of May 2026. Once the second phase of construction is completed by the end of 2028, we will ultimately be able to produce one million units per month (with a product shipment weight of approximately 120 tons per month). On the day of the ceremony, about 100 participants, including business operators and local stakeholders, attended and toured the various processes such as mold making, casting, and processing. Although we are starting with a compact system in terms of equipment and personnel, we will continue to take on challenges and advance our business to a new dimension.