Introducing a special cushion tape for securely fixing flexo plates!

Uses ultra-thick PE foam base material with a thickness of 1.5mm or more. Cushion tape specifically for fixing flexo printing plates [Tesa 52062 BigFoam LT].

In flexographic printing for soft packaging, cushion tape is essential for securing the plates. Among these, tesa 52062 is particularly designed for thicker substrates (1.5mm = 1,500µm thickness or more). This product can ensure thickness with just one piece, eliminating the need to layer thin cushion tapes, which is expected to improve work efficiency. [Features] - Uses a specially developed adhesive for securing flexo plates - Easy to adjust the positioning of the plates, allowing for easy removal without damaging them - Stable adhesive strength prevents plate lifting and air infiltration - Compatible with both solid printing and halftone printing - The foam substrate has excellent resilience and durability, allowing for quick recovery from misalignment and enabling long-run printing *For more details, please download the PDF or contact us.

• others

For flexographic printing that demands higher quality! Tesa SoftPrint 72420 Fast & Easy X soft printing plate mounting tape.

Tesa Softprint 72420 Fast & Easy (FE) Extra Soft is a foam tape developed for fixing printing plates in flexographic printing, designed to meet the demands of higher quality packaging printing. It supports package designers and printing companies by enabling the beautiful expression of more complex patterns in halftone printing. Thanks to the high-performance adhesive applied in this structure, it reduces the time required for the application of flexographic printing tape and plates, allowing for stable long-run printing. Additionally, it enables quick and clean removal of the printing plates and tape. The Extra Soft (X Soft) substrate is designed to prevent foam breakage and ensures that no adhesive remains when peeled off from the sleeve. This helps to shorten the time required for cleaning the sleeve and preparing for the next job change. Furthermore, it not only improves the printing process but also ensures the most critical aspects for the printing industry: print quality and reproducibility. *For more details, please download the catalog.

• others

Easier and more reliable attachment and detachment of flexo printing plates. A new product featuring groove-shaped recesses that allow air bubbles to escape from the adhesive layer on the plate side has arrived! (500µm category)

Flexographic Printing Plate Fixing Cushion Tape [Double-Sided Adhesive Tape] A new product focusing on the plate attachment and detachment process has been launched. It features a groove-like indentation (microchannel structure) in the adhesive layer on the plate side. This design allows for the escape of air bubbles that may get trapped during the application process. It is a new design that is expected to improve the efficiency of plate alignment work. You can choose from four different hardness levels for the foam (the last digit of the product number will differ). *For more details, please download the catalog or contact us.*

• Subsidiary materials

Achieve same-speed splicing and improve productivity. Adhesive tape specifically for connecting film and non-woven fabric raw materials【Tesa EasySplice 51910】.

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials with a unique "interlayer delamination" structure. Its main feature is that it prevents the trouble of the raw material surface opening during idle time, and it ensures that the adhesive surface is not exposed after the splicing process. This helps to prevent mechanical issues caused by adhesive tape getting caught in printing and laminating machines. As the name "Easy Splice" suggests, it is simple and easy to use—just apply one type of tape in a horizontal line. By using Easy Splice, you can reduce splicing failures and waste. Additionally, it allows for reliable splicing without reducing running speed, contributing to increased productivity. We can suggest options from our lineup based on your requirements, such as the type of raw material and running speed. *For more details, please download the PDF or contact us.*

• Safety and consumables

Achieve same-speed splicing and improve productivity. Adhesive tape specifically for connecting film and non-woven fabric raw materials [Tesa EasySplice 51918].

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials with a unique "interlayer delamination" structure. Its main feature is that it prevents the trouble of the raw material surface opening during idle time, and it ensures that the adhesive surface does not become exposed after the splicing process. This helps to prevent mechanical issues caused by adhesive tape getting caught in printing and laminating machines. As the name "Easy Splice" suggests, it is simple and easy to use; you just need to apply one type of tape horizontally. By using Easy Splice, you can reduce splicing failures and waste. Additionally, it allows for reliable splicing without reducing running speed, contributing to increased productivity. We can recommend options from our lineup based on your requirements, such as the type of raw material and running speed. *For more details, please download the PDF or contact us.*

• others

Achieving same-speed splicing of difficult-to-attach films, contributing to increased productivity! Special adhesive tape for raw material splicing [Tesa EasySplice 51948].

The Tesa Easy Splice is a specialized adhesive tape designed for splicing raw materials, featuring a unique "interlayer delamination" structure. It prevents the trouble of the raw material opening during idle time, and after splicing, it does not expose the adhesive surface, allowing for smooth operation of printing and laminating machines. True to its name "Easy Splice," it is simple and easy to use. You only need to apply one type of tape horizontally, making preparation for splicing straightforward. It reduces the risk of splicing failures and wear, enabling the connection of raw materials without slowing down the operating speed, thus contributing to increased productivity. We can suggest options from our lineup tailored to your requirements, such as the type of raw material and operating speed. *For more details, please download the PDF or contact us.

• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.