The "PE Series" small storage battery from Connex Systems was featured in the electronic edition of the Nihon Keizai Shimbun (Japan Economic Newspaper) on March 9, 2021.

[Power Outage Measures] For those who have a new coronavirus vaccine refrigerator, unexpected long-term power outage measures can be addressed with a medical emergency small storage battery!

**Power Outage Measures** ▲ Emergency power supply and backup power for ultra-low temperature freezers that store COVID-19 vaccines, etc. ▲ Provides power to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. - Cases of vaccine disposal due to power outages are occurring frequently. Due to insufficient power capacity, freezers for vaccine storage may fall into power shortages, or unexpected power outages may cause freezers to stop, leading to the inability to maintain the appropriate storage temperature, resulting in frequent cases of vaccine disposal. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can provide power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W). It is a portable model with large casters, making it possible to bring it to vaccination sites. It can continue to be used as a backup power source for important equipment even after the COVID-19 pandemic is over.

• Disaster prevention supplies

Flexible power supply can be secured for specific machine backups, necessary locations, and required uses. *Certification from the General Incorporated Association for Disaster Prevention and Safety "Recommended Disaster Prevention Products."

The emergency portable small storage battery "LB0043PE4" is a plug-and-play solution that enables proactive business continuity planning (BCP) even during unexpected power outages. It allows for flexible power supply to protect essential equipment such as minimal facilities, medical devices, freezers, and incubators for important samples, in necessary locations and for necessary purposes. No dedicated manager or installation work is required; simply plug it into an outlet. It is equipped with casters for easy mobility and can be installed in places where construction is not possible, ready to use from the day it arrives. #Power backup for approximately 10 hours when the power consumption is below 300W. The emergency backup power supply "LB0043PE4" can also be utilized to ensure power for ultra-low temperature freezers for vaccines. 【Features】 ■ Power outage, BCP, disaster prevention measures ■ Enables proactive BCP even during unexpected power outages ■ No installation required ■ Stores and secures necessary power to support the operation of equipment *Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

• Disaster prevention supplies
• Other Batteries
• Power and Energy Equipment

We have implemented backup power for ME equipment, research instruments, freezers, and medical information systems as part of our measures for power outages, BCP, and disaster prevention!

The emergency small-scale power storage system "LB0043PE4" enables flexible power supply for essential equipment, medical devices, freezers, incubators, and other specific devices to protect medical supplies and important samples. It stores and secures the necessary power to support the operation of equipment. It has been widely adopted in hospitals, medical institutions, nursing facilities, and biotech ventures. Its applications include providing power backup for refrigeration, freezing, and cryopreservation equipment, as well as testing, analysis, and information processing devices. It is also ideal for small to medium-sized facilities that do not have emergency power generation equipment, as well as for backing up the power generation systems of large hospitals. [Installation Locations] - As a backup power source for ME equipment, research instruments, freezers, and medical information systems. * Certified as a "Recommended Product for Disaster Prevention" by the Japan Disaster Prevention Association. * For more details, please refer to the PDF document or feel free to contact us.

• Disaster prevention supplies
• Other Batteries
• Power and Energy Equipment

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK