TKB at Evacuation Shelters: Stockpiled Welfare Evacuation Shelters and Evacuation Living Supplies - Plastic Folding Simple Bed 'PLA BED'

A simple bed made with lightweight plastic sheets! ■ Moisture-resistant and suitable for long-term storage ■ Can be stored compactly ■ Reusable ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed in the series. 【Reasons to Choose This Product】 ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ It is compatible with alcohol disinfection and sterilization, keeping it clean at all times. ■ Using beds in evacuation centers helps suppress coughing caused by dust and particles. ■ Customization beyond standard sizes is possible. ■ Jointly developed with the Saitama City General Affairs Bureau Crisis Management Department Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Lightweight plastic board simple bed ■ Moisture-resistant and suitable for long-term storage Compact storage ■ Reusable and economical ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Speed Set Type★ This type has fewer parts and can be assembled in a short time. ■ When not in use, it can be stored compactly without taking up storage space. ■ Assembly time is about 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Nagoya City Nakagawa Ward Office, Administrative Department, General Affairs Section. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Emergency shelter and disaster prevention measures simple bed ■ Moisture-resistant and can be stored long-term Compact storage ■ Reusable ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plapal" manufactured by Kawakami Sangyo Co., Ltd. ★Multi-type★ The top board is divided into three sections, allowing it to be used not only as a bed but also as a desk or chair. ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is approximately 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Safety Division of Sakai Town, Ibaraki Prefecture. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Bubble wrap not only has cushioning properties but also excels in insulation. It can be used as supplementary supplies for evacuation life, such as "laying on the floor," "sticking to windows," and "providing warmth."

Normally used as packaging material, 'bubble wrap' can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during such times. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and alleviates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

■Made of plastic, it is resistant to deterioration from water absorption and humidity, suitable for long-term storage. ■Can be used safely even in bad weather. ■Disinfection and sterilization with alcohol is possible.

This product uses "Plaparl," a lightweight rigid plastic sheet manufactured by Kawakami Sangyo Co., Ltd. - Since it is made of plastic, it can be reused. - It does not absorb moisture or water, allowing for long-term storage. - It can be disinfected and sterilized with alcohol. - The strength does not decrease even if the box gets wet in bad weather. *For more details, please feel free to contact us.

• Outdoor toilet unit
• Disaster prevention supplies
• Manhole body

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A system for driver terminals has been realized through API integration, promoting the optimization of the delivery process and improvement of services to customers. Seino Information Service Co., Ltd. and Briskola Co., Ltd. announce that they have adopted Briskola's full lifecycle API management product "BAMs Series" for the construction of a system utilizing APIs and the management of API connections with various business applications for driver terminals, aimed at improving delivery efficiency and achieving digitalization of logistics for Seino Transportation Co., Ltd. and transportation groups nationwide. By implementing Briskola's "BAMs Series" for API management in the delivery management system constructed through API integration, we will focus on responding to the expected increase in the number of API calls due to the anticipated increase in terminal numbers, as well as ensuring stable system operation and preventive detection. This will lead to improved operational efficiency for drivers and the provision of high-quality services to customers sending and receiving packages.

In this case study, we have received cooperation from Obayashi Corporation and Sankyu Inc., leaders at the forefront of the construction and logistics industries, to introduce their specific initiatives regarding "early detection of heatstroke risk" and "ensuring worker safety." Additionally, we have published an interview article with Obayashi Corporation, who contributed to the development of "GenVital LTE," as a "development story." As heatstroke risk has become a social issue, we encourage everyone in companies working on improving on-site productivity and safety measures for workers to read this for insights. GRIFFY will continue to contribute to creating safer and more comfortable working environments through DX solutions, including "GenVital LTE." ◾️ Obayashi Corporation (case study) ◾️ Sankyu Inc. (case study) ◾️ Obayashi Corporation (development story) *Please check the link for more details on the article.