Standardization of high shear strength high base - We have started selling the 'Shear Cutter High Base Method'.

The Shiakotta High Base Method is a product capable of handling large shear forces that could not be addressed by previous high base methods.

In the "High Base Method," which is the main product of Senkushia, there has been a challenge where, in the design of factories and warehouses, cases where braces are attached to columns sometimes result in insufficient shear resistance depending on the conditions. We have been working on solving this issue. As a result, with this product, even in cases where braces are attached to columns, it has become possible to transmit the shear force from the braces acting on the base plate to the foundation by adopting the "Shear Cutter High Base Method." 【Features】 ■ Adoption of base plates with shear cutters ■ Established design methods for column base types and V-brace types (special types) ■ Obtained evaluation from the Japan Building Center and certification from the Minister of Land, Infrastructure, Transport and Tourism *For more details, please download the materials or contact us.

• Foundation construction

Emphasizing rationalization and burden reduction in building structural design!

The High Base NEO construction method has obtained certification from the Minister of Land, Infrastructure, Transport and Tourism regarding materials and evaluation from the Japan Building Center (BCJ Evaluation - ST0059, ST0058) regarding the construction method. By having certified contractors from Senkushia perform construction tasks such as anchor bolt installation and non-shrink mortar filling, the quality of the column bases and the reliability of structural performance are enhanced. 【Features】 ■ Emphasis on rationalizing structural design and reducing burdens, alleviating the designer's workload ■ Obtained evaluations from the Japan Building Center for the construction method and certification from the Minister of Land, Infrastructure, Transport and Tourism for the materials ■ Further cost reduction through the reduction of steel material volume For more details, please refer to the catalog or website.

• Steel Structure System
• Structural Materials
• Foundation construction

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth operational management. They are used in various areas, from coin-operated parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.