[Example] Unexpected Uses of Bubble Wrap: Disaster Preparedness, Evacuation Shelters and Living Supplies, Cold Protection, Floor Cushioning Measures, Bubble Wrap

A simple bed made with lightweight plastic sheets! ■ Moisture-resistant and suitable for long-term storage ■ Can be stored compactly ■ Reusable ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed in the series. 【Reasons to Choose This Product】 ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ It is compatible with alcohol disinfection and sterilization, keeping it clean at all times. ■ Using beds in evacuation centers helps suppress coughing caused by dust and particles. ■ Customization beyond standard sizes is possible. ■ Jointly developed with the Saitama City General Affairs Bureau Crisis Management Department Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Bubble wrap not only has cushioning properties but also excels in insulation. It can be used as supplementary supplies for evacuation life, such as "laying on the floor," "sticking to windows," and "providing warmth."

Normally used as packaging material, 'bubble wrap' can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during such times. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and alleviates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

Unexpected uses for bubble wrap beyond packaging: as a cold weather measure, it can be used to "line the floor," "stick to windows," or "serve as a substitute for a sleeping bag," as well as for emergency supplies.

Under normal circumstances, "bubble wrap" is used as packaging material, but it can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during emergencies and disasters. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and mitigates cold from the ground. ■ Sticking it to windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It can relieve accumulated stress. *For more details, please feel free to contact us.*

• Piping and insulation
• Disaster prevention supplies
• Heat insulation and heat shielding methods

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Can be divided into three parts and used as a desk or chair. Alcohol disinfectant compatible. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Multi-type★ The top board is divided into three sections, allowing it to be used not only as a bed but also as a desk or chair. ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is about 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused repeatedly. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Safety Division of Sakai Town, Ibaraki Prefecture. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Few parts for quick assembly. Alcohol disinfectable. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Speed Set Type★ This type has fewer parts and can be assembled in a short time. ■When not in use, it can be stored compactly, saving storage space. ■Assembly time is about 1 minute, making it easy to set up. ■Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■Jointly developed with the Nagoya City Nakagawa Ward Office, Administration Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Storage case can be used as a bed partition. Alcohol disinfectant compatible. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed. ■ When not in use, it can be stored compactly, not taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing for consistent cleanliness. ■ Jointly developed with the Crisis Management Department of the Saitama City General Affairs Bureau, Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other store equipment and supplies
• Disaster prevention supplies
• Other office supplies

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The page for the "Startup and Relocation Support Set," which includes everything necessary for new business openings, office relocations, and new clinics—such as multifunction printers, office furniture, business phones, internet connections, equipment, and acquiring a unique domain—has been renewed. We provide a one-stop solution for concerns related to new business openings and relocations, such as "I want to start a business, but I don't know what to prepare" and "How should I choose a multifunction printer or phone?" This saves you both time and effort compared to arranging everything individually. We also offer a new business plan that helps reduce initial costs. Everything is provided brand new. We offer it at an overwhelming price! Please feel free to contact us.

Deto Co., Ltd., an ODM/OEM manufacturer of water-related products celebrating its 60th anniversary, has recently established a research and development center/fine bubble lab in Gifu City. ■ Background and Objectives As Deto expands its business, it has opened a research and development center aimed at enhancing the development of water-related products and strengthening the measurement and testing of fine bubbles by improving the environment and facilities. New facilities include a fine bubble lab equipped with a clean room specialized for fine bubble measurement and testing, an electronic testing room, and a verification room for water-related products. ■ Clean Room Specialized for Fine Bubble Measurement and Testing By establishing a clean room, the influence of external environments can be minimized, allowing for the acquisition of more reliable data than ever before. This will enhance the accuracy of fine bubble measurement and testing, enabling Deto to provide a higher level of service to its customers. Deto is a designated lab of the Fine Bubble Industry Association and is flexible in accommodating requests for measurements with products and equipment brought in, as well as measurements with pure water, and setting conditions for water pressure and temperature.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) field. They announced the publication of the "Notice of Renewal of Owned Media Articles! 21" page on June 25, 2026 (Thursday). This is an announcement of the renewal of seven articles. (Page Overview: Excerpts) ■ What is the difference between BtoB and BtoC? ■ The more you try to hide it, the more it spreads!? The 'Streisand Effect' ■ Feeling 'progress' increases motivation!? The 'Endowed Progress Effect' ■ Past experiences influence subsequent actions and thoughts!? The 'Affordance Effect' ■ Believing that your thoughts are correct and that many others think the same 'False Consensus Effect' ■ If there's no impact, it gets ignored!? The 'Salience Effect' ■ What is the difference between 'Kasu Hara' and 'complaints'!? ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/notice-of-renewal-of-ownedmedia-articles21-2026-06/