Case studies of large screen installations for stores

Digital signage monitors can also be used! Stylish presentation utilizing a slim shape, with a spacious design that blends harmoniously into the environment.

"Slime Pad Series" Approximately 94mm slim shape. It stylishly enhances show windows and display shelves while conveying product images and information. Whether used individually, combined, or arranged to create corners, it allows for various combinations to suit the installation location, enabling the perfect shape to meet your needs. You can also connect corners to display videos in all four directions. 【Features】 ■ Slim shape that can flexibly adapt *For more details, please refer to the related link page or feel free to contact us.

• Garden lighting/lights (LED/solar)
• others
• Digital Signage

Digital signage monitor usage is also possible! Ultra high brightness of 10,000 nits! The panel can be cut out up to 90°, making it suitable for rooftop signs and more!

The "bill board series" is a high-definition, high-brightness LED display for outdoor use. With high-brightness LEDs ranging from 5000 to 10000 nits, the images are bright and easy to see even in direct sunlight. Each unit is equipped with individual air vents that draw out internal heat and circulate cooled air through a natural air cooling system. An aluminum sheet is also laid in the power box to enhance heat dissipation. Additionally, the panels can be cut at angles of up to 90°. They can be used for rooftop signs that cover all directions. 【Features】 ■ Ultra-high brightness LEDs up to 10,000 nits ■ Ability to create corners ■ Bright and easy-to-see images even in direct sunlight ■ Energy-saving cooling system ■ Can be connected at angles *For more details, please refer to the related link page or feel free to contact us.

• Audio and video equipment
• Spatial Design
• others

Digital signage monitors can also be used! Not only in shops, but also on the walls of studios and offices! Easy to set up without any hassle.

The "Slim Series" is a high-definition, thin LED that can be easily set up using any method, whether wall-mounted, floor-standing, or truss-mounted, due to its slim and lightweight design. The unit can be removed from the front using a vacuum suction device, significantly reducing maintenance time. Additionally, it can connect three types of panels, allowing for the construction of an LED vision that fits any space while minimizing unnecessary costs. 【Features】 ■ Indoor use ■ 27mm thick thin LED ■ Suitable for any location ■ Front maintenance ■ Panels can be connected *For more details, please refer to the related link page or feel free to contact us.

• Garden lighting/lights (LED/solar)
• others
• Digital Signage

Digital signage monitors can also be used! You can create corners not only in shops but also on the walls of studios and offices!

The "Freely Series" is thin and lightweight, allowing for angle adjustments. Panels can be cut out at any desired angle. Whether left flat or assembled in a three-dimensional form, it is a unique LED panel that attracts attention. The unit can be removed from the front using a vacuum suction device, significantly reducing maintenance time. 【Features】 ■ For indoor use ■ Angle adjustment available ■ Fits in any location ■ Front maintenance ■ Panels can be connected *For more details, please refer to the related link page or feel free to contact us.

• Garden lighting/lights (LED/solar)
• others
• Digital Signage

Digital signage monitors can also be used! High-definition images with a small pitch even outdoors! The unit can be removed from the front using a vacuum suction device!

The "exterior series" is a high-definition, high-brightness LED display for outdoor use. Units can be removed from the front using a vacuum suction device, significantly reducing maintenance time. By combining sizes of 500×1125mm, 500×843.75mm, and 500×562.5mm, you can create the best-sized LED vision. 【Features】 ■ Various panel sizes ■ Front maintenance ■ Supports 16:9 screen configuration ■ Capable of displaying corporate commercials and live television broadcasts seamlessly ■ Clear images with high brightness of 5000 nits, suitable for day and night *For more details, please refer to the related link page or feel free to contact us.

• Audio and video equipment
• Spatial Design
• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.