"Contactless switch" to call the elevator without pressing a button for virus and infection control.

"Non-contact switch series" that allows you to open and close doors simply by waving your hand without directly touching the doorknob or switch.

The "hand wave sensor" allows you to open and close doors simply by waving your hand, making it hygienic! This non-touch sensor enables you to wave your hand without touching the main unit in places where hygiene is a priority. Unlike regular touch switches, there is no worry about battery depletion. By adjusting the sensitivity, you can fine-tune the detection range to suit the specific environment. It reduces the risk of virus and bacteria transmission in places where hygiene is important, such as food factories, medical facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus transmission as doors can be opened and closed without contact. ○ A wide variety of options available based on application and location. ○ Ideal for places where hygiene is a concern, such as food factories and medical facilities. ○ Switch mechanism prevents unnecessary detection. 【Recommended for the following locations】 - Factory facilities: Used in food processing factories' ingredient storage rooms. - Dining facilities: Used in kitchens of hotels and restaurants. - Care facilities and medical institutions: Used in automatic doors of care facilities, operating rooms in hospitals and medical institutions. - Environmental facilities: Used in clean rooms of environmental facilities. ◎ For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

Call the elevator without pressing the buttons, which are prone to harboring viruses and bacteria, using a contactless method.

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We address various concerns and challenges you may have. 【Challenge】 I want to call the elevator without pressing the buttons, which are prone to viruses and bacteria. 【Solution】 Wave your hand over the non-contact switch to call the elevator. ◎ Please feel free to contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/