[New Product] Announcement of SS Cable Kinshichou Type 2 [Manure Pollution Countermeasures]

It is used to prevent birds from perching on overhead wires and similar structures.

- The hard needles are attached around the entire circumference of the wire (in 8 directions), so twisting does not compromise the bird deterrent effect. - With three fixed points at the one-touch fixing part, work can be done safely and easily. - The connected structure allows for pushing in from the side of the utility pole. - The breathable perforated structure contributes to lightweight and flame resistance. - The applicable wires are low-voltage service lines: 3DV 60 sq (outer diameter 30 mm) and 100 sq (outer diameter 37 mm).

• others

It is used to prevent birds from perching on overhead lines and similar areas (mainly around the edges).

- The all-around 9-direction semi-rigid needles centered on the upper part eliminate any gaps where birds can perch. - The reverse U-shaped hinge structure and the variable left-right connection structure allow for easy installation on curved and twisted wires, with the semi-rigid needles conforming to the curves. - A fixed part for fall prevention is provided in the center. - It can be installed easily with a simple process of pushing onto the wire, implementing fall prevention measures, and securing the terminal. - It is compatible with indirect construction methods. - It can be used on overhead wires with a finished outer diameter of 30mm or less.

• others

It is used to prevent birds from perching on overhead lines and similar structures.

- The connecting part has a rotating structure, and when a bird tries to perch, the main body rotates. - The needle is equipped with a full circle (8 directions), enhancing the bird deterrent effect. - It can be safely and easily operated with three fixed points for the one-touch fixing part (six fixed points for the two-link type). - The material used is weather-resistant PE, and the color adopted is a gray that is less noticeable in appearance.

• others

It prevents birds from perching on handrails and armrests. Since it is made of resin, it is also easy to process.

- It can be easily cut and overlapped, making length adjustments for handrails and arm supports easy. - Due to its male-female connection structure, it can be freely connected in both vertical and horizontal directions, and its flexibility allows it to be installed on various equipment, including curved surfaces. - The material is highly weather-resistant and contains no environmentally harmful substances.

• others
• Rain protection items

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.