We will be exhibiting at the Measurement Exhibition "INTER MEASURE" 2021.

A dustproof and waterproof near-infrared moisture meter that meets protection level IP66. Suitable for a wide range of production lines, including food and paper, where high standards of quality control are required!

The "Near Infrared Moisture Meter KB-30" is a device that measures moisture by irradiating light onto the target object. The light used for irradiation is near-infrared light, which has a high correlation with moisture content, allowing for accurate real-time moisture measurement. Additionally, near-infrared light generates very little heat and does not alter the physical properties of the target object, making it ideal for integration into production lines to continuously monitor moisture changes in a non-destructive and non-contact manner. It can provide a current output of 4-20mA according to the measurement range. The housing is made of unpainted stainless steel, preventing accidents that could result in peeling paint or rust contaminating the production line. Furthermore, it is equipped with dust and water protection, conforming to IP66 standards. This moisture meter is suitable for a wide range of production lines, including food and paper, where high-level quality control is required. 【Features】 ■ Economical model of inline near-infrared moisture meter ■ Real-time moisture measurement on the production line ■ Waterproof and dustproof protection grade IP66 compliant ■ Unpainted, preventing rust and paint peeling contamination on the line *For more details, please download the PDF or feel free to contact us.

• Rock drills, demolition machines, and excavators
• Other measuring instruments

High functionality at a low price. Measurement of four components in just a few seconds. The sample container offers great flexibility, and measurements can be taken without any pre-treatment.

The near-infrared component analyzer "KB-270" is a product designed for those who hesitate to adopt NIR technology due to concerns that component analyzers are "over-specified and expensive." It achieves a suitable specification while maintaining an affordable price. It accommodates a wide range of samples, including agricultural products, food ingredients, processed goods, pharmaceuticals, paper, and minerals, and can perform high-precision measurements in just a few seconds, regardless of the shape, from powders to pastes. In addition to not requiring sample pretreatment, it can measure even small amounts of samples. Furthermore, it allows for high-efficiency work as it can measure samples directly placed on the device, as well as using glass petri dishes of any size. 【Features】 ■ Simultaneous measurement of up to four components in seconds ■ High flexibility in sample containers ■ Understanding of component variations by day and season through data accumulation ■ Easy creation of calibration curves using PLS calculations with the included software ■ Optional masking holder allows measurement of precious small samples *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other measuring instruments

In petri dishes, in plastic bags, in bottles, or directly placed. Simplifying the entire measurement process with various sampling methods and non-destructive measurements!

Are you facing the following challenges with moisture content measurement? - Measuring 50 samples a day takes over 8 hours, even if each sample takes 10 minutes... - Due to hygroscopicity and storage concerns, I don't want to take samples out of bags or vials... - I want to avoid destructive testing since I need to confirm moisture before moving on to the next test or process... The near-infrared moisture meter KB-230 not only shortens measurement time but also eliminates the need for preparatory and cleanup tasks before and after measurement. *Note: The ability to create a calibration curve is a prerequisite. ■－－Various Measurement Targets－－■ It can measure all kinds of substances, including agricultural products, food ingredients, processed goods, pharmaceuticals, paper, and minerals. Additionally, it is not limited by the type or characteristics of powders and pastes. *Note: The ability to create a calibration curve is a measurement condition. *For inquiries about measurement feasibility and results, please contact us.

• Other measuring instruments

Equipped with a non-contact infrared thermometer that measures the direct sample temperature. Adopted as a moisture meter in quality control departments and inspection departments that require advanced moisture management.

The "Infrared Moisture Meter FD-800" is positioned as the pinnacle model in the infrared moisture meter series by Kett Scientific. It employs a groundbreaking dual temperature sensor method to achieve high-precision moisture measurement. It is positioned as a moisture meter for quality control departments and inspection departments that require advanced moisture management, ensuring high-precision moisture control. 【Features】 ■ The top model of infrared moisture meters ■ Minimum moisture display of 0.01%, mass display of 1mg ■ Dual temperature control that also monitors the temperature on the plate ■ Measurement time significantly reduced compared to other models from our company *For more details, please download the PDF or feel free to contact us.

• Fertilizers and Pesticides
• Other measuring instruments

Standard yet multifunctional and highly accurate! For quality control departments and inspection departments that require advanced moisture management. Capable of displaying with high precision of 0.01%.

The "Infrared Moisture Meter FD-720" allows for switching between high precision of 0.01% and the standard 0.1% for moisture display. Additionally, it adopts a "Rapid Drying Mode" enabled by drying control software, which allows for moisture values to be obtained in a short measurement time, significantly reducing measurement time depending on the target being measured. This device is positioned as a moisture meter for quality control and inspection departments that require advanced moisture management, and it can be used for high-precision moisture management. [Features] ■ Mid-range model of infrared moisture meters ■ Minimum moisture display of 0.01%, mass display of 1mg ■ Utilizes an efficient infrared quartz heater for drying ■ 6 types of measurement modes *For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

A heater that emits more than twice the infrared radiation of conventional products achieves efficient drying! Equipped with two measurement modes: "Automatic Stop Mode" and "Time Stop Mode."

The infrared moisture meter FD-660 is an infrared moisture meter that closely resembles the standard measurement method for moisture measurement, known as the "loss on drying method," and the heating drying and mass measurement method. It can measure the moisture content of almost all samples, regardless of type or properties! Despite its compact appearance, the auto tare mechanism reduces the influence of balance drift, inheriting the same functionality as conventional devices while significantly improving the operation panel. *Demo units are available for free rental! 【Features】 ■ Equipped with an "Organic Carbon Heater" → It radiates more than twice the infrared compared to heat sources used in other infrared moisture meters, enabling efficient drying. Additionally, being organic, it is an ecological heat source that does not contain compounds or metals that pollute the environment. ■ Two types of measurement modes: "Automatic Stop Mode" and "Time Stop Mode" ■ Built-in high-performance electronic balance with an "Auto Tare Mechanism" that allows zero point adjustment during measurement ■ Large stainless steel sample dish with a diameter of 110 mm Samples that pose a risk of explosion, ignition, or the generation of harmful substances due to heating cannot be measured. *For more details, please download the catalog or feel free to contact us.

• Fertilizers and Pesticides
• others

We have prepared a lineup of several types with different measurement principles! Please use this for selecting products!

This catalog is a comprehensive catalog of measurement instruments related to painting and plating handled by Kett Scientific Research Institute. Proper management of the thickness of surface treatments (painting and plating) is very important from the perspectives of rust corrosion, product value, and processing costs, and the instrument responsible for this is the thickness gauge. We offer several types of instruments with different measurement principles based on the combination of the base metal and the coating being measured. Please use this to help you choose the appropriate type. [Contents (excerpt)] ■ Measurement principles of electromagnetic thickness gauges ■ Measurement principles of eddy current thickness gauges ■ Substrates and coatings that can be measured by measurement method ■ List of thickness gauges ■ List of standard plates for accessories and options *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html