A collaboration product between analog and digital radios is being released!

The transmitter uses analog video, while the receiver features Full HD video (HDMI) for collaboration ➡ No delay or freezing, certified for technical standards, made in Japan, perfect for embedded use!

◎ Collaboration product between the ultra-compact video transmission module (GTV-24TMS) and the analog-digital receiver (GTV-R1-HDCVBS), no license required. ★ If you have any questions or technical issues, feel free to contact us via email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) ★★ Remote sensing: A technology that captures the surrounding situation through aerial footage from a distance and obtains quantitative information about the measurement target using sensors and measuring instruments. ★ The number of receivers that can be installed for one transmitter is virtually unlimited, similar to a radio (1:n). ★ Our uncompressed wireless devices can be used with image-related equipment, image processing, surveillance systems, image transmission devices, etc., with 100% no delay! ● Video formats: 720p(60), 1080p(60), 4K(30/60). ● The size of the receiving monitor screen can be adjusted using a push switch. ● Equipped with an LED indicator to show the strength of the received signal. ● Maximum outdoor line-of-sight distance is approximately 500m.

• Audio and video equipment

Transmit analog (NTSC) 720p video from the sender, and play it back on the receiver with full HD video (1080P) + 100% no delay + no freezing!

【Overview Specifications】 ★ Optionally, the receiver side's video output (NTSC) can support full HD video output (1080p), and it can collaborate with various receivers! ★ There are embedded modules available for both the transmitter and receiver sides, allowing for the creation of custom wireless devices. The size of the uncompressed transmission module is 6.8 cm × 5.1 cm × 1.8 cm / weight 60g! ★ The advantages of uncompressed video communication are "high quality (NTSC, 720P)" with no freezing, "no delay," and "no compression distortion" during transmission and reception! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) [Features] ◎ The number of combinations with the transmitter and receiver can be 1:n (∞)! ● Technology has been acquired for NTSC and PAL high quality (720p, 30f/s) and can operate on battery 006P. ● By using a high-gain antenna on the receiver side, the outdoor line-of-sight distance can exceed 500m. Note) Custom design for the "Unmanned Mobile Image Transmission System" is possible!

• Audio and video equipment

The transmitter's NTSC video (720p) and HD receiver (HDMI) provide 100% no latency full HD output. Contributes to the cost-effectiveness of the wireless system!

* Contributing to labor-saving in a mixed environment of analog and digital devices through collaboration! NTSC video is played back without delay or freezing with BNC connectors, and HD is equipped with HDMI connectors! Transmitter and receiver can also be combined in reverse! ★★ If you have any questions or technical issues, feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) "Features" ◎ Number of combinations with transmitter and receiver = 1:n (∞), made in Japan! ◆ No freezing or time lag; demo results: 100 out of 100 people were satisfied with the no-delay! ★ Use cases for uncompressed wireless devices include image-related equipment, image processing, surveillance systems, image transmission devices, etc.! ★ The analog (NTSC) terminal is a BNC receptacle, and the HD terminal is HDMI type A. ★★ The format for received video resolution: 720p (60), 1080p (60), 4k (30/60) can be adjusted with a push switch, and the size of the received screen can also be switched with the push switch. ★ "Technical compliance" has been obtained, and no license is required!

• Audio and video equipment

For customers considering the construction of a unique "remote sensing system" without delay, this module is made in Japan and is reliable. Please consult with us!

Model: GTV-24TMS (Made in Japan) ◎ What is remote sensing: A technology that understands the surrounding situation through aerial images taken from a distance and obtains quantitative information about the measurement target using sensors and measuring instruments. ★ Due to its ultra-compact size, it can be used as a transmitter for various applications! ★ The transmission module operates for 1.5 hours on a single 006P battery! ★ No license required as it has obtained technical compliance, no freezing! ● Compatible with various digital video signals for connection! Note: Design and compatibility for unmanned mobile image transmission systems are possible! [Features] ◎ Number of combinations with transmitter and receiver = 1:n (∞) is possible! ★ A product that stands out in terms of radio wave stability, no delay, transmission distance, confidentiality, energy saving, size, and reliability. ★ Can transmit NTSC: 720p 30f/s with no delay. By the way, the transmission delay time is on the order of μ (micro) seconds. ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

• Dam construction

A long-selling product for business use for over 10 years! 100% free of time lag and freezing, compact and sturdy, energy-efficient, highly rated for its quality, made in Japan.

※ The key specification of industrial wireless devices is 100% no delay, not low delay. 【Features】 ★★ No time lag, no similar products, and non-compressed wireless devices! ◎ Comprehensive after-sales support! Compatible with a transmitter-receiver ratio of 1:n (∞). ★ Our non-compressed wireless devices can be used without delay in image-related equipment, image processing, surveillance systems, and image transmission devices. ★ The advantages of non-compressed video communication are 100% real-time "high quality (NTSC: 720P)" with no time lag or compression distortion between transmission and reception! [Features] ● Wireless devices that support everything from general specifications to professional specifications with no delay, certified for technical standards! ◆ The receiver is equipped with a high-brightness blue LED indicator to show the strength of the received signal. ● The transmission delay time between sending and receiving is on the order of μ (micro) seconds. ● Palm-sized, capable of continuous operation for 9 hours with a dedicated battery! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

• Pipeline Construction

The features of a completely uncompressed wireless device are no freezing, delay time in the microsecond range, and visually, it is not low latency but "no latency." Made in Japan for your peace of mind!

*Contributes to monitoring systems, reliability improvement, and labor-saving; demo units available; made in Japan!* ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) **Features** ★ Our uncompressed wireless devices can be used without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. ★ As an option, the receiver side can support high-quality video output (NTSC: 720p) to HD video output, and modifications to the transmitter and receiver are also possible. ★ "Interference countermeasures" can be reduced by using directional antennas and installation methods. **Specifications** ◎ Number of transmitter-receiver pairs = 1:n (∞) combinations possible! ◆ Already obtained technical compliance, no license required, with a 3-year warranty! ◆ Usable with any camera system; simply connect NTSC/PAL video, yellow, red, and white AV cables, and antennas. By the way, the transmission delay time is in the order of μ (micro) seconds. ◆ The receiver is equipped with an LED indicator that shows the strength of the received signal.

• Audio and video equipment

We have various Q&A regarding purchasing and technical aspects in our question collection. It is definitely helpful. Feel free to consult us; we have demo radios available!

Our company's uncompressed wireless devices can be utilized with image-related equipment, image processing, surveillance systems, and image transmission devices with 100% no delay. If you have any questions or technical issues, please feel free to contact us via email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) We can support connections with various digital video signals in imaging equipment! Our wireless devices are unaffected by weather radar, ensuring no sudden interruptions in video! The advantages of "uncompressed" live video communication are "high quality" and "no time delay" during transmission and reception! Our wireless devices are compact and energy-efficient, contributing to the reliability and labor-saving of surveillance and management systems! Frequently Asked Questions (FAQ): Q1: Please tell me the prices of the wireless units and module products. A1: Wireless units and module products will always come with an antenna. The antennas themselves range from a few thousand yen to around 100,000 yen. Once the choice of antenna is determined, the total price will become clear.

• Other Management Services

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.