[Request for Survey] Questions and Requests Regarding the Dual-Axis Extruder

A high-end twin-screw extruder equipped with infinite possibilities for various fields.

A twin-screw extruder used to enhance the added value of plastic raw materials is referred to as a compounding extruder. Our company manufactures the "TEX" series of twin-screw extruders to meet the demands for high performance and high quality. The TEX is utilized not only for traditional inorganic fillers, masterbatch compounds, polymer alloys, and GF/CF compounds but also for a wide range of applications including reactions, degassing, dehydration, biomass compounds, long fiber compounding, and supercritical carbon dioxide compounding. By incorporating JSW's unique technologies that dramatically improve compounding performance (compounding screws, compounding cylinders, high-distribution compounding screws) and new solutions for increased discharge capacity (Side Feed Deaerator), we guide our customers into new realms that traditional machines could not achieve.

• paint
• glue
• Biomass fuel production equipment

■Shortened delivery time ■Variety of screw shapes ■Quality assurance

The screw piece of the extruder is a consumable that wears out with age and use. Wear of the screw piece can lead to a decrease in processing capacity and deterioration of product quality, which may result in serious issues such as breakage. Therefore, the screw piece is an important component that must be replaced at the appropriate time. At JSW, we stock screw pieces in frequently used shapes, allowing us to deliver them promptly during regular maintenance or in case of damage.

• paint
• glue
• Biomass fuel production equipment

Improving the productivity of powder raw materials! It is used in the section that transports the raw materials of the extruder screw.

The "SFD" is a device that solves the problem of low bulk density fillers significantly reducing the conveying efficiency of the extruder screw and limiting the processing capacity of the extruder. By increasing the bulk density of the raw materials within this device, the conveying efficiency of the extruder screw can be improved, thereby enhancing the processing capacity of the extruder. Our technology center has various testing facilities, including extruders and SFDs. 【Features】 ■ Improves the productivity of powdered raw materials ■ By increasing the bulk density of the raw materials, the conveying efficiency of the extruder screw is enhanced ■ Used in the section that conveys raw materials for the extruder screw ■ Exhaust within the extruder system is conducted through a filter ■ Applicable to extruders with screw sizes ranging from 26.5mm to 443mm *For more details, please refer to the PDF materials or feel free to contact us.

• paint
• glue
• Biomass fuel production equipment

Adoption of a hanging cutter unit! It is possible to significantly expand the workspace on the floor.

The "SDC" is a compact UWC device that incorporates new technologies for small-capacity machines, advancing miniaturization and high functionality. With the adoption of a cutter holder featuring automatic self-alignment, tedious alignment adjustments are no longer necessary, ensuring stable pellet shapes even during long-term operation. The use of a suspended cutter unit significantly expands the working space on the floor. 【Features】 ■ The automatic pressing mechanism eliminates the need for blade adjustment during operation. ■ By controlling the pressing force consistently, it is possible to manage the wear rate of the blades. ■ The longevity of the cutter blades is expected to improve. ■ The connection between the cutter unit and the circulation box uses a one-touch clamp system. ■ Three processing capacities (kg/h) are available: Max. 100/1000/2500. *For more details, please refer to the PDF materials or feel free to contact us.

• paint
• glue
• Biomass fuel production equipment

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.

"Because the ground is poor, we have no choice but to use a structural slab." Such fixed notions of "over-design" unnecessarily drive up construction costs. In large space buildings such as warehouses, factories, and stores, the choice of floor slab type is one of the most significant variables affecting construction costs. What is important is to compare and verify the advantages and risks of each type, and to derive the optimal solution that is "suitable for the purpose" for the entire building. By reading this content, you will understand the following points: - Characteristics of the five main construction methods with different support forms - Recommended situations for adoption - Cost comparison examples of floor slabs "I am struggling with the dilemma of floor settlement risks and costs on weak ground." "I want to know the optimal solution for the site without being tied to a specific construction method." Construction companies and general contractor representatives facing such issues are encouraged to take a look.

Our company will be exhibiting at the "Hokuriku Technology Exchange Techno Fair 2026." Dates: October 23rd, 10:00 AM - 5:00 PM October 24th, 10:00 AM - 4:00 PM Venue: Fukui Prefectural Industrial Hall We look forward to your visit.