We will be exhibiting at JASIS 2020 from November 11 (Wednesday) to November 13 (Friday), 2020.

Can be introduced at low cost! Chloride levels in concrete structures can be quickly measured on-site! Accuracy not achievable with handheld devices [Registered with NETIS].

Measurement time is just 2 minutes! Rapid measurement of chloride content in concrete structures can be conducted on-site. Registered with the New Technology Information System (NETIS)! Registration number "KK-100109-VR" Through joint development with the University of Tokyo's Institute of Industrial Science, we have successfully increased the detection sensitivity of chloride ions to 0.1 kg/m3. The demonstration experiments regarding the correlation with potentiometric titration have also been completed. In the demonstration experiments conducted at the Hokuriku Regional Development Bureau of the Ministry of Land, Infrastructure, Transport and Tourism, we received the following evaluation: 【Evaluation by the Ministry of Land, Infrastructure, Transport and Tourism】 Observation: In concrete salt damage investigations, the distribution of chloride ions can be grasped in a short period, and in terms of data collection, it is a technology that minimizes the impact on existing structures. 【Features】 ○ Non-destructive and rapid composition analysis possible ○ Non-destructive analysis of large and irregular samples ○ High-sensitivity and easy measurement of chloride content in concrete ○ Compact and lightweight portable design suitable for on-site analysis ○ No need for liquid nitrogen or cooling water; analysis possible with a 100V power supply *For more details, please refer to the PDF or feel free to contact us.

• Rock drills, demolition machines, and excavators

Numerous achievements in material testing for incineration ash and RPF! By limiting applications, we achieve low prices without sacrificing analytical accuracy! Compact, lightweight, and high-sensitivity analyzer.

- Weighs only 9kg! Easy for women to carry. - Power supply is AC100V only. Energy-saving device (1/5 of conventional models). - Excessive features have been eliminated to achieve a low price. - Can be freely customized according to application. - Equipped with an SDD detector, no liquid nitrogen or cooling water required. 【Adoption Results】 Analysis of precious metal components Testing and analysis of harmful substances in incineration ash Analysis of RPF components Chlorine and sulfur analysis in oil

• Other measuring instruments

High sensitivity at the level of ICP and atomic absorption devices! Total reflection fluorescence X-ray analysis equipment capable of ultra-trace analysis.

The portable total reflection fluorescent X-ray analysis device "OURSTEX200TX" is a lightweight, high-sensitivity device that is priced under 10 million yen! This product was developed by Awares Tech based on an idea from Professor Jun Kawai of the Graduate School of Engineering at Kyoto University. 【Features】 ● Ideal for trace analysis! ● Total weight of just 8 kg! ● Capable of high-sensitivity analysis comparable to ICP and atomic absorption devices. ● Equipped with an SDD (Silicon Drift Detector)! 【Examples of Use】 ◎ Testing of well water and rivers ◎ Analysis of leachate from soil and toys ◎ On-site analysis in the fields of food, pharmaceuticals, and forensic science ◎ Component analysis of hair and airborne particles 【For more details, please download the catalog or feel free to contact us】

• Other analytical equipment

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.