Announcement of the Release of the Optimal Box Proposal Engine (Optimization of Packaging Box Sizes)

Calculate the size of cardboard boxes that perfectly fit the product to reduce shipping costs. An example of a reduction of 2.5 million yen per month.

The "Optimal Box Proposal Engine" is software that analyzes the size information of shipped products and cardboard boxes to calculate the minimum size of cardboard boxes that fit the product size. By minimizing the total length of the three dimensions (length, width, height) that affect shipping costs, it enables the reduction of shipping and material costs. Regular analysis also helps prepare appropriate cardboard boxes in line with the transition to new products. 【Features】 ■ Calculates the reduction rate of shipping costs compared to using the original box ■ There are cases where shipping costs were reduced by approximately 2.5 million yen Since actual data on shipped products is required, this is proposed in conjunction with the packaging box selection engine (BOX Engine). * Packaging box selection engine: https://www.vanning-master.jp/vm_cb01.html * For more details, please refer to the PDF materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software
• Other Software

Fare reduction, automatic selection of packaging boxes, work efficiency improvement.

■Do you have any of these concerns? 1) The variety of outer box types makes selecting the appropriate box a challenge directly linked to shipping costs. 2) There is a discrepancy in box selection accuracy between experienced and new employees, causing shipping personnel to struggle with box selection and feel stressed. 3) It is impossible to know the number of boxes needed until packing is attempted, making it difficult to prepare boxes and shipping labels in advance. These concerns can be resolved with the introduction of the Vanning Master Box Packing BOX Engine. ■Benefits of Implementation 1) Automatically suggests the smallest cardboard box that fits the three dimensions of the shipping item, aiming to reduce shipping costs. 2) By linking with the inventory management system and printing box information on shipping instructions such as picking lists, the worries about box selection are eliminated. 3) Knowing the number of boxes needed at the shipping planning stage allows for box preparation, packing details, shipping labels, and delivery slips to be issued at the order stage. 4) Shipping cost calculations can be done at the order stage. 5) It becomes easier to consider reducing or introducing new types of cardboard boxes.

• Other Software

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The comprehensive catalog "General Catalog J-02" for the 2023 fiscal year has been completed. This comprehensive catalog features many Joe Prince products primarily used in industrial equipment and facilities. Please make use of it.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.