We have published a concept book for industrial energy storage systems.

Ideal for realizing a resilient society! Contributes to CO2 reduction and significantly reduces energy consumption through energy creation.

The industrial storage battery system <BLP> corresponds to the operation of the storage system defined in the Resilience ZEB demonstration project. Our industrial storage battery system contributes to the realization of planning that integrates environmental and crisis management, as well as efficient equipment operation and energy solutions aimed at ZEB. By combining solar power generation and storage batteries, we effectively utilize renewable energy sources. This contributes to CO2 reduction and significantly decreases energy consumption through energy creation. Furthermore, in the event of a power outage due to a disaster, surplus electricity can be used, enabling autonomous energy security. 【Features】 ■ Effectively utilize renewable energy sources by combining solar power generation and storage batteries ■ Contribute to CO2 reduction (support efforts for decarbonization) ■ Significantly reduce energy consumption through energy creation ■ Enable "autonomous energy security" by using surplus electricity in the event of a power outage ■ Suitable for realizing a resilient society *For more details, please refer to the PDF materials or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Other Smart Grid

A compact outdoor installation type that does not require housing storage!

The industrial energy storage system from Connex Systems, the BLP, is an outdoor installation type that can accommodate both emergency power supply and daily self-consumption. It is an industrial energy storage system that contributes to BCP measures for public facilities and businesses, as well as to reducing environmental impact and supporting local communities. This compact outdoor installation integrates the PCS and battery enclosure, contributing to space-saving. The system is suitable for BCP applications, allowing for a reasonable increase in capacity as needed during emergencies. 【Features】 - Compact outdoor installation that integrates the PCS and battery enclosure - Contributes to space-saving - Rated output of 30 kW / storage capacity of approximately 73.7 kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - A system well-suited for BCP applications With an output of 30 kW, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Power and Energy Equipment

Achieving BCP for large hospitals, clinics, and research facilities from medical clinics! As a backup power supply for medical devices and essential equipment.

**"For essential operations that cannot be stopped even during disasters"** In the event of a prolonged power outage, there may be cases where self-generating power equipment becomes unusable due to fuel shortages. By introducing solar power generation systems and storage systems that do not require fuel, we can ensure power supply during outages. **"Backup for three-phase power equipment is OK"** Even in clinics and small hospitals, the introduction of storage systems allows for BCP measures that ensure the safety and security of patients, enabling a wide range of backups from computers to elevators. **"Storage batteries contribute to disaster prevention capabilities"** Storage systems can be utilized for power supply measures for electronic devices used in various situations, such as medical equipment and heating/cooling systems in nursing care facilities. By introducing storage systems, there is no need to worry about fuel reserves, allowing for backup of various equipment and devices. **"Installation Locations"** ■ Clinics, medical facilities, dental clinics, obstetrics and gynecology, nursing care facilities, research facilities, etc. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other power generation
• Batteries and Capacitors
• Power and Energy Equipment

Cost reduction and reduction of environmental impact! Control the "maximum demand" and contribute to reducing electricity costs. Reliable BCP and power outage measures with solar power generation equipment and batteries!

Are you struggling with energy-saving measures for warehouses, factories, or large commercial facilities? - Rising electricity costs - Rising fuel costs - Specific energy-saving strategies, etc. As the demand for more efficient energy use and management increases, the introduction of storage batteries is highly effective for energy-saving measures in warehouses and factories. When combined with solar power generation, it becomes an effective solution for reducing facility costs, addressing environmental impact issues, and disaster preparedness. It also serves as an effective means of ESG investment, contributing to the enhancement of corporate value. The introduction of industrial storage systems, when combined with solar power generation, is very effective as an energy-saving measure for facilities and contributes to reducing electricity costs. By enforcing discharge during peak usage times, it controls "maximum demand," helping to reduce electricity costs. Additionally, with scheduled settings, charging and discharging of generated power can be done by time zone, achieving peak shift effects. [Implementation Locations] - Environmental measures and energy-saving applications for factories, warehouses, and large commercial facilities. *For more details, please refer to the PDF document or feel free to contact us.*

• Solar power generation equipment
• Solar power generation
• Other Batteries

Introducing industrial storage batteries for BCP measures in locations that can serve as disaster prevention bases or evacuation centers during emergencies! (National Resilience)

Abandoned schools and roadside stations are gaining attention as evacuation sites and disaster prevention hubs for residents during emergencies. By installing industrial storage battery systems at these disaster prevention hubs, the disaster resilience of the community can be enhanced. When solar power generation is introduced simultaneously, it is possible to supply power to specific loads from the generated electricity and the capacity of this product, allowing for response to long-term power outages. It can be installed in a compact outdoor design that does not require housing, saving space. 【Installation Locations】 ■ Public facilities, government buildings, community centers, schools, elderly care facilities, roadside stations, commercial facilities, supermarkets, etc. 【Achieving Disaster Preparedness and Energy Savings with Industrial Storage Batteries】 By combining solar power generation and storage batteries, natural energy sources can be effectively utilized. This can lead to benefits such as reducing CO2 emissions and fulfilling corporate social responsibility (CSR), adding value to energy savings and business continuity planning (BCP) measures. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Batteries and Capacitors
• Power and Energy Equipment

This is a large-capacity industrial storage battery with a three-phase connection, output of 30kW, and 73.7kWh, ensuring a reliable power supply even during prolonged power outages!

In order to promptly execute the BCP during a disaster, it is necessary to secure a minimum level of infrastructure. Connex Systems' industrial storage system can be used for power equipment such as water supply pumps with a three-phase, three-wire output of 30kW. By incorporating a transformer, it can also support single-phase devices like lighting, televisions, and air conditioning, making it possible to back up commercial refrigerators and industrial pumps. Additionally, with a large capacity of 73.7kWh, this storage system/battery can reliably supply power even during prolonged outages. [Installation Locations] ■ Apartments and Offices Power outages that may occur due to disasters can also lead to simultaneous water supply interruptions in apartments. This is because electric pumps are used to send water to the upper floors. Such systems are widely used in various facilities, from buildings and hotels to food factories, and can be considered one of the critical devices that would cause trouble if they stop during a disaster. Connex Systems' industrial storage battery can supply electricity to three-phase power sources with an output of 30kW, allowing for the backup of three-phase devices such as electric pumps. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Other Batteries
• Power and Energy Equipment

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its PV compatibility, allowing the PV power converter to operate independently during power outages without going into self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal times, it allows for efficient electricity use through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Our first zero-phase current transformer (ZCT) CTL-36-S80-12Z-CL - Waterproof design allows for outdoor installation - Split-type design enables easy installation on existing setups - Customizable according to your requirements For more details, please contact us.

Compact yet multifunctional. A constant voltage power supply with a multifunctional specification that expands lighting control capabilities by supporting the connection of two lighting devices. We have launched the compact power supply "LPAVR2-2472D." It is a DC input type constant voltage control power supply condensed into a palm-sized resin case, offering ease of use and flexible dimming functions. The LPAVR2-2472D is a power supply unit that balances space-saving design with flexible dimming capabilities. It can be utilized in a wide range of scenarios, such as adjusting the brightness of LED lighting and voltage control applications within devices. Product Features: ● High-performance constant voltage power supply that supports long and large lighting despite its compact size ● Made with a resin case, it features analog settings for two channels and multifunctional specifications ● Flexible dimming function compatible with internal and external dimming (0-5V) ● Output voltage can be switched in three stages, ensuring safety ● Excellent installation with screwless terminal blocks and DIN rail compatibility For detailed specifications or inquiries about installation, please feel free to contact us.