We have released an image of the introduction of industrial energy storage systems.

Ideal for realizing a resilient society! Contributes to CO2 reduction and significantly reduces energy consumption through energy creation.

The industrial storage battery system <BLP> corresponds to the operation of the storage system defined in the Resilience ZEB demonstration project. Our industrial storage battery system contributes to the realization of planning that integrates environmental and crisis management, as well as efficient equipment operation and energy solutions aimed at ZEB. By combining solar power generation and storage batteries, we effectively utilize renewable energy sources. This contributes to CO2 reduction and significantly decreases energy consumption through energy creation. Furthermore, in the event of a power outage due to a disaster, surplus electricity can be used, enabling autonomous energy security. 【Features】 ■ Effectively utilize renewable energy sources by combining solar power generation and storage batteries ■ Contribute to CO2 reduction (support efforts for decarbonization) ■ Significantly reduce energy consumption through energy creation ■ Enable "autonomous energy security" by using surplus electricity in the event of a power outage ■ Suitable for realizing a resilient society *For more details, please refer to the PDF materials or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Other Smart Grid

A compact outdoor installation type that does not require housing storage!

The industrial energy storage system from Connex Systems, the BLP, is an outdoor installation type that can accommodate both emergency power supply and daily self-consumption. It is an industrial energy storage system that contributes to BCP measures for public facilities and businesses, as well as to reducing environmental impact and supporting local communities. This compact outdoor installation integrates the PCS and battery enclosure, contributing to space-saving. The system is suitable for BCP applications, allowing for a reasonable increase in capacity as needed during emergencies. 【Features】 - Compact outdoor installation that integrates the PCS and battery enclosure - Contributes to space-saving - Rated output of 30 kW / storage capacity of approximately 73.7 kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - A system well-suited for BCP applications With an output of 30 kW, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the PDF document or feel free to contact us.

• Other power generation
• Batteries and Capacitors
• Power and Energy Equipment

Achieving BCP for large hospitals, clinics, and research facilities from medical clinics! As a backup power supply for medical devices and essential equipment.

**"For essential operations that cannot be stopped even during disasters"** In the event of a prolonged power outage, there may be cases where self-generating power equipment becomes unusable due to fuel shortages. By introducing solar power generation systems and storage systems that do not require fuel, we can ensure power supply during outages. **"Backup for three-phase power equipment is OK"** Even in clinics and small hospitals, the introduction of storage systems allows for BCP measures that ensure the safety and security of patients, enabling a wide range of backups from computers to elevators. **"Storage batteries contribute to disaster prevention capabilities"** Storage systems can be utilized for power supply measures for electronic devices used in various situations, such as medical equipment and heating/cooling systems in nursing care facilities. By introducing storage systems, there is no need to worry about fuel reserves, allowing for backup of various equipment and devices. **"Installation Locations"** ■ Clinics, medical facilities, dental clinics, obstetrics and gynecology, nursing care facilities, research facilities, etc. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other power generation
• Batteries and Capacitors
• Power and Energy Equipment

Cost reduction and reduction of environmental impact! Control the "maximum demand" and contribute to reducing electricity costs. Reliable BCP and power outage measures with solar power generation equipment and batteries!

Are you struggling with energy-saving measures for warehouses, factories, or large commercial facilities? - Rising electricity costs - Rising fuel costs - Specific energy-saving strategies, etc. As the demand for more efficient energy use and management increases, the introduction of storage batteries is highly effective for energy-saving measures in warehouses and factories. When combined with solar power generation, it becomes an effective solution for reducing facility costs, addressing environmental impact issues, and disaster preparedness. It also serves as an effective means of ESG investment, contributing to the enhancement of corporate value. The introduction of industrial storage systems, when combined with solar power generation, is very effective as an energy-saving measure for facilities and contributes to reducing electricity costs. By enforcing discharge during peak usage times, it controls "maximum demand," helping to reduce electricity costs. Additionally, with scheduled settings, charging and discharging of generated power can be done by time zone, achieving peak shift effects. [Implementation Locations] - Environmental measures and energy-saving applications for factories, warehouses, and large commercial facilities. *For more details, please refer to the PDF document or feel free to contact us.*

• Solar power generation equipment
• Solar power generation
• Other Batteries

Introducing industrial storage batteries for BCP measures in locations that can serve as disaster prevention bases or evacuation centers during emergencies! (National Resilience)

Abandoned schools and roadside stations are gaining attention as evacuation sites and disaster prevention hubs for residents during emergencies. By installing industrial storage battery systems at these disaster prevention hubs, the disaster resilience of the community can be enhanced. When solar power generation is introduced simultaneously, it is possible to supply power to specific loads from the generated electricity and the capacity of this product, allowing for response to long-term power outages. It can be installed in a compact outdoor design that does not require housing, saving space. 【Installation Locations】 ■ Public facilities, government buildings, community centers, schools, elderly care facilities, roadside stations, commercial facilities, supermarkets, etc. 【Achieving Disaster Preparedness and Energy Savings with Industrial Storage Batteries】 By combining solar power generation and storage batteries, natural energy sources can be effectively utilized. This can lead to benefits such as reducing CO2 emissions and fulfilling corporate social responsibility (CSR), adding value to energy savings and business continuity planning (BCP) measures. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Batteries and Capacitors
• Power and Energy Equipment

This is a large-capacity industrial storage battery with a three-phase connection, output of 30kW, and 73.7kWh, ensuring a reliable power supply even during prolonged power outages!

In order to promptly execute the BCP during a disaster, it is necessary to secure a minimum level of infrastructure. Connex Systems' industrial storage system can be used for power equipment such as water supply pumps with a three-phase, three-wire output of 30kW. By incorporating a transformer, it can also support single-phase devices like lighting, televisions, and air conditioning, making it possible to back up commercial refrigerators and industrial pumps. Additionally, with a large capacity of 73.7kWh, this storage system/battery can reliably supply power even during prolonged outages. [Installation Locations] ■ Apartments and Offices Power outages that may occur due to disasters can also lead to simultaneous water supply interruptions in apartments. This is because electric pumps are used to send water to the upper floors. Such systems are widely used in various facilities, from buildings and hotels to food factories, and can be considered one of the critical devices that would cause trouble if they stop during a disaster. Connex Systems' industrial storage battery can supply electricity to three-phase power sources with an output of 30kW, allowing for the backup of three-phase devices such as electric pumps. *For more details, please refer to the PDF materials or feel free to contact us.

• Solar power generation equipment
• Other Batteries
• Power and Energy Equipment

Large-capacity, compact industrial storage system for disaster prevention, mitigation, and preparation for power outages during emergencies.

【Power Outage and BCP Measures】Industrial Storage System Compact yet high-capacity! Achieving both emergency power supply and daily self-consumption (Rated output 30kW / Storage capacity 73.7kWh). A medium-sized industrial storage system that contributes to BCP measures for public facilities and businesses, as well as reducing environmental impact and benefiting the community. Are you fully prepared for power outages caused by natural disasters that can happen at any time? There is an increasing demand for storage batteries from facilities that serve as disaster response centers, such as hospitals, local governments, childcare, and nursing facilities. By introducing storage batteries, you can enhance disaster preparedness in the community, including schools, evacuation centers, and roadside stations. Additionally, it is suitable for maintaining functions in corporate offices, factories, warehouses, apartments, large commercial facilities, and dairy and livestock farms, as well as for backing up various industrial equipment. A reliable power outage measure with a high-output, high-capacity storage system/battery. A high-spec system with a rated output of 30kW and a storage capacity of 73.7kWh is made affordable. Conex Systems' medium-sized industrial storage system contributes to securing power supply during emergencies.

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its PV compatibility, allowing the PV power converter to operate independently during power outages without going into self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal times, it allows for efficient electricity use through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Solar power generation equipment
• Solar power generation
• Power and Energy Equipment

We will be exhibiting at the "22nd Japan Fiber Material Research Seminar" to be held on May 22, 2026 (Friday). We plan to showcase dust protection clothing and other items. We look forward to your visit! ● Date: May 22, 2026 (Friday) 11:00 AM - 4:00 PM ● Venue: BDK Conference Room, 7th Floor, Buddhist Propagation Center Building, (Public Interest Incorporated Foundation) (Tokyo) 'Mi no Ma' For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing information on protective clothing and equipment by work environment, methods for putting on and taking off, and customer usage records.

We will be exhibiting at the "2026 Spring Conference of the Japan Foundry Engineering Society [187th National Conference] - Connecting Exhibition," which will be held from May 23 (Saturday) to May 24 (Sunday), 2026. We plan to showcase flame-resistant protective clothing and more. We look forward to your visit! ● Date: May 23 (Saturday) - May 24 (Sunday), 2026 ● Venue: Light Cube Utsunomiya (Tochigi Prefecture), 1st Floor, East Side of the Main Hall For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

We have launched a new “Audience Control Feature” for TwooCa Mall, enabling merchants to limit product visibility and sales to specific companies, organizations, and communities. With this feature, merchants can now: ✔ Offer employee-exclusive discounts and company sales ✔ Create fan club or community-only merchandise sales ✔ Customize product visibility for specific user groups In addition, by integrating with TwooCa’s payment functions and digital-money-convertible point system, the platform provides a seamless purchasing experience for users. This feature is designed to support value creation in closed communities such as: ・Employee welfare programs ・Fan clubs ・Membership communities ・Sports teams We will continue expanding TwooCa Mall as a platform optimized for employee engagement, member experiences, and community-based commerce. ▼ Press Release https://prtimes.jp/main/html/rd/p/000000108.000076589.html #TwooCa #EmployeeBenefits #Fintech #Cashless #HRTech #CommunityCommerce #SportsBusiness #FanEngagement #DX

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that we will be presenting at the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Product Market," which will be held on May 20, 2026. At this report meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our efforts toward greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening across the entire supply chain. Main Content: Introducing our initiatives for CO2 reduction based on the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Date and Time of the Interim Report Meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the Interim Report Meeting and the Tokyo Metropolitan Government's project: Decarbonization Support in the Supply Chain for the Creation of a Green Product Market https://www.cfp-sc.metro.tokyo.lg.jp/

We will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)." Dates: June 17 (Wednesday) to June 20 (Saturday), 10:00 AM to 5:00 PM *On the final day, June 20 (Saturday), until 4:00 PM only. Venue: Makuhari Messe We look forward to your visit.