Microbubble pressure flotation separation test [Free testing in progress!]

Let's take a look at the principle of the pressurized floating device that lifts and removes dirt!

The pressurized flotation method is a technology that attaches fine bubbles (microbubbles) to coagulated flocs or suspended substances, allowing them to rise rapidly due to the buoyancy of the bubbles. This technology can achieve more than four times the effectiveness of sedimentation methods. Expected effects of pressurized flotation: - Removal of SS (80-95% removal) - Removal of BOD (20-50% removal) - Removal of Norhex (80-95% removal) - Removal of phosphorus (removal rate varies depending on the amount of PAC or polyferric sulfate injected) - Removal of COD (over 90% removal for suitable wastewater) - Concentration of activated sludge The key point of the pressurized flotation method is, of course, the generation of fine bubbles, but the ability to properly select chemicals and adjust pH allows for the separation and concentration of various substances. In some cases, it is possible to achieve flotation separation using only fine bubbles without the injection of chemicals. If you can send approximately 20 liters of sample water, we will conduct tests free of charge. Additionally, we can lend out testing equipment (1.1kW 200V), so please feel free to contact us through the inquiry page on our website. https://www.edijapan.co.jp/

• Drainage and ventilation equipment
• Septic tank equipment
• Water Treatment

At Terra Co., Ltd., employees are rewarded with points for everyday positive actions such as maintaining good attendance, supporting their health, and investing in self-development. As a result: ●Employee loyalty to the company increased ●Attendance improved ●1-on-1 meetings became more active ●Internal communication quality improved When employees feel that their company genuinely cares about them, it can strengthen engagement, motivation, and a sense of belonging. This case study highlights how recognizing everyday efforts through a point-based program can create meaningful organizational change. Read the full case study: https://kortvaluta.com/testimonials/terra/?utm_source=WEB&utm_medium=sns&utm_campaign=li #Wellbeing #EmployeeEngagement #EmployeeRetention #TwooCa

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.