Endurance Wear-Resistant Tape for Automotive Wire Harnesses 51036

With this one solution, you can manage the "bundling," "protection," and "wear prevention" of increasingly complicated cables! It is effective for reducing the diameter and weight of outer materials.

【Features】 1. Effective for reducing the diameter and weight of the exterior 2. Excellent protective performance 3. Adhesive resistant to peeling 4. Solvent-free and low VOC Please download product information from the related catalog. If you require additional detailed technical materials, please feel free to contact us.

• Safety and consumables

It is a high-temperature and abrasion-resistant adhesive tape for identifying high-voltage power lines above 60V.

The orange pigment used in the tape has the characteristic of not whitening even in an environment of 150°C for 3000 hours. 【Features】 - Uses a pigment that does not whiten - High substrate strength, excellent resistance to burrs and abrasion - Strong against lifting and peeling even on uneven surfaces - Solvent-free, low VOC *For more details about the product, please refer to the catalog.

• others

A protective tape that puts less strain on the wires. It reduces the area where the wires and adhesive come into direct contact, allowing the wires inside to have more freedom.

The "sleeve" is a tape designed by our company that places minimal stress on wires. By reducing the surface area where the wire and adhesive come into direct contact, it allows for greater freedom of movement for the wire inside, achieving high flexibility. This enables smooth assembly. 【Features】 - No end stopping required - Excellent flexibility - Strong against peeling - Solvent-free, low VOC You can check the structure and usage of the tape in the PDF catalog below. ↓ ↓ ↓ ↓

• others

With this one solution, you can achieve "bundling," "protection," and "noise prevention" for increasingly complicated cables! It simultaneously realizes high abrasion resistance and lightweight wire harnesses.

This is a fleece adhesive tape for cable harnesses. 【Product Features】 - Strong adhesion that securely binds even under harsh temperature conditions - Extremely high abrasion resistance and flexibility - Achieves weight reduction and noise reduction compared to conventional tube types - Easy to handle and can be torn by hand *Please download product information from the related catalog. If you require additional detailed technical materials, please feel free to contact us.

• Safety and consumables

A wire harness tape that combines the highest level of noise prevention and wear resistance!

This is a one-sided adhesive tape using an acrylic adhesive on a polyamide velour substrate. 【Product Features】 - For cable bundling and noise prevention of parts in automotive interiors - Both noise prevention and abrasion resistance performance are top-rated "E" class high-performance tapes (based on European standard LV312) - The thickest in our wire harness tape lineup with a total thickness of 1000μm - Made from luxurious black velour material, offering an aesthetically pleasing appearance *Please download product information from the related catalog. If you require additional detailed technical materials, please feel free to contact us.

• Safety and consumables

Suitable for protecting areas exposed to direct radiant heat. It has excellent heat resistance and thermal reflectivity, and is highly functional.

The Tesa 68000 series is a high-heat-resistant adhesive tape for thermal reflection, made with a glass cloth substrate laminated with aluminum and an acrylic-based adhesive. By reflecting radiant heat, it can reduce the temperature rise of underlying materials by approximately 50%. *Based on test results from SAE J2302 【Features】 - High thermal reflectivity and heat resistance - Simultaneously achieves heat damage prevention and harness bundling - Half-cut processing is also available - PV1 is suitable for flat areas such as fuel tanks - PV17 uses PET non-woven fabric on the surface to prevent noise For more details, please contact us or download the PDF catalog below. ↓ ↓ ↓ ↓

• others

Kort Valuta Inc. (Headquarters: Shibuya-ku, Tokyo; President & CEO: Hideki Shibata; hereinafter “the Company”) announces that it has renewed the user interface (UI) of TwooCa, the Company’s digital employee ID with Visa payment functionality.

Kort Valuta Inc. (Headquarters: Shibuya-ku, Tokyo; CEO: Hideki Shibata) is pleased to announcethat NBS Logisol Co., Ltd. (Headquarters: Hita City, Oita Prefecture; CEO: Itsuro Kono) has introduced “TwooCa,”a Visa-enabled digital employee ID card, for approximately 1,100 employees.

An article about the resin-based lightweight formwork system "PERI DUO" has been published in the "Construction News" (November 7, 2025)! "PERI DUO" is a new system formwork made of resin that can be used for walls. It is made from a newly developed material called "Politec," which is high-strength and lightweight. With fewer components, it is easy to handle. It allows for increased reuse and is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components and easy to handle ■ 100% recyclable *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

We are pleased to announce that the "Kuji Regional Renewable Energy Circulation Project" in Kuji City, Iwate Prefecture, has received an Excellence Award at the 2025 Solar Week Awards organized by the Japan Photovoltaic Energy Association. The "Solar Week Awards" recognize initiatives and projects that contribute to the community, are desired by the community, and serve as models for the expansion of solar power generation. On July 24, 2025, NGK Insulators, Ltd. issued a press release titled "Start of Operation of Solar Power Generation Equipment at Hybrid Storage Facility with Sharing Function - Ceremony Held at Solar Power Plant Operated by Iwate Bank Group Company." This demonstration of the hybrid storage facility with sharing function (StorageHub) is being conducted by manorda Iwate, a regional trading company fully funded by Iwate Bank, with development led by NR-Power Lab Co., Ltd. NR-Power Lab Co., Ltd. is leading the design, development, and system operation of the StorageHub in this project. We will continue to collaborate with our partner companies to engage in technological development and the creation of advanced services aimed at realizing a sustainable local community.

The IFEMA exhibition center in Madrid is already prepared! Grace Solar warmly invites everyone to the Genera exhibition on November 18, where we look forward to seeing the future of solar mounting technology together. As Spain and Europe accelerate their transition to renewable energy, we will present our entire series of durable solutions: ✔️ Intelligent Tracker System — Smart technology designed to achieve maximum power generation across diverse terrains ✔️ Ground Mounting System — Provides a solid foundation for large-scale solar power plants ✔️ Roof Mounting System — A multifunctional penetration prevention solution applicable to commercial and industrial roofs Please visit us at booth H3D01. This is an opportunity to interact directly with our technology experts, see live demonstrations of our products, and gather information to build a solid foundation for your next project. Venue: IFEMA Exhibition Center, Madrid, Spain Date: November 18-20, 2025