Customer Voice Vo.3 - Bathroom Renovation Work

Would you like to enhance the asset value of your real estate property with a Before/After introduction? Using a remodeling method that is more affordable than renovations without major construction.

We will introduce examples of traditional baths that have been "remade" to look as good as new, despite the years that have passed and the aging of the bathroom, through photographs! ■ What is the remaking method? The remaking method does not involve replacing the bath or demolishing walls like a renovation project. Instead, it repairs the bath itself to finish it like new, and reuses existing tiles, thereby renovating while making the most of what is currently in use. 【Benefits of the remaking method】 ☑ Since there is no demolition, the construction period is as short as 1 to 3 days! ☑ By making the most of what is already there, there are no waste disposal costs, leading to cost savings! ☑ Since there is no need to replace the bathtub, the costs incurred are about 1/2 to 1/3 compared to a renovation! ☑ It can enhance asset value by achieving a beautiful result even within a limited budget! *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom unit
• Building renovation system
• Renovation Design

Introducing examples of non-slip flooring installation along with photos!

We would like to introduce a case study of the remodeling method based on the concept of "repairing only part of it" by Asahi Kenko. We used Takiron to carry out non-slip flooring installation. We can also repair and fix cracks, holes, and scratches in bathtubs and floor tiles, so please feel free to contact us if you have any concerns or problems related to your bathroom. 【Materials Used】 ■ Takiron ・BA881 ・LA471 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Renovate the old traditional bathroom without demolition, simply and neatly! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." The old traditional bathroom is renovated simply and neatly without demolition. It allows for an easy renewal with minimal waste and a short construction period. 【Renovation Details】 ■ Ceiling and Walls ・ PFM473 ■ Foam Panels ■ Non-slip Floor Sheet ・ Busna Floor BNF1002 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

In addition to walls, ceilings, and floors, mirrors and faucets have also been replaced to look as good as new! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the concept of "only fixing part of it." Renewing the current bathroom to a higher standard without demolishing it. The walls, ceiling, and floor, as well as mirrors and faucets, will be transformed to look as good as new. 【Renovation Details】 ■ Ceiling and Walls ・PMO017 ■ Accent wall with 2-width panels ・PGM224 ■ Non-slip sheet for the floor ・LA271 ■ Mirror ■ Showerhead *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing a case study of unit bath film work where the wall's water blisters have beautifully disappeared!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "repairing only part of it." Before construction, the lower part of the wall had swollen due to water absorption from years of use, and mold had also developed. Through the repair and reinforcement work on the wall panels, the water swelling was eliminated, and by applying a white film, a sense of cleanliness was achieved. [Construction Overview] ■ Paper and baseboard treatment - The swollen areas were scraped, and panel materials were partially applied. ■ Completion - A film was applied, and the wall's water swelling was completely removed. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing the bathroom film installation work along with photos!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "only fixing part of it." Before construction, the walls were dirty with soap scum and other residues. After applying the film, we installed the faucet fixtures, re-did the caulking, and set up the bathtub. The mirror was also moved to a position where it can be seen while sitting on a chair. 【Construction Overview】 ■ Film Application - After removing debris with a vacuum cleaner and cloth, a primer was applied. ■ Removal of Substrate and Fixtures - After sanding the floor, the faucet fixtures and bathtub were removed, and the existing caulking was taken out. - Subsequently, paper treatment was done on the walls and sanding on the floor. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

For a slip-resistant floor! Introducing examples of bathroom renovation projects!

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." We address concerns such as "the dirt and mold between the stones are noticeable and hard to clean even after scrubbing" and "it is slippery, posing a risk of falling and getting injured." 【After Construction】 ■ Cleaning becomes easier ■ The textured surface of the sheet creates a non-slip floor (allowing for safe bathing) *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

The Sanko electric stair cart series has surpassed a total sales volume of 3,000 units. They have been adopted by many companies, including those involved in the delivery of air conditioning equipment, the transportation of electrical equipment and copiers, and public institutions. This electric stair cart allows a single person to easily transport heavy loads of up to 160 kg. It can also tow up to 1,000 kg by one person. The electric assist towing vehicle makes it easy to transport heavy carts, and the electric assist cart with a lifting platform facilitates the loading and unloading of goods. These products contribute to reducing the burden and improving work efficiency in workplaces struggling with labor shortages in logistics.

Thank you very much for your continued support. At the STJ Group (Santec Telecom Japan Co., Ltd. and STJ Rentec Co., Ltd.), we regret to inform you that our year-end and New Year holiday schedule will be as follows. We apologize for any inconvenience this may cause and appreciate your understanding. ■ Year-End and New Year Holiday Schedule From Tuesday, December 30, 2025, to Sunday, January 4, 2026 * Last acceptance date for the year: Thursday, December 25 * Last shipping date for the year: Friday, December 26 * Monday, December 29, is the last business day of the year. Inquiries and consultations will be accepted. ■ Business Resumption Date Starting Monday, January 5, 2026 During this period, due to manufacturer holidays, we anticipate significant delays in sales and other responses. We apologize for the inconvenience and appreciate your understanding. Regarding inquiries made through the web, we will respond after Monday, January 5, 2026. We kindly ask for your understanding in advance. Our website will still be available for use during the holiday period. We look forward to your continued patronage next year.

Thank you very much for visiting the Micronet booth at "IIFES 2025," held at Tokyo Big Sight for three days starting from November 19 (Wednesday). This time, we showcased under the theme of "Real-time Control via PC," and thanks to everyone, we were able to conduct the event successfully. Details about the venue on the day of the event and the exhibited products are introduced on the report page below. We hope those who could not attend will take a moment to read it. ■ IIFES 2025 Exhibition Report https://www.mnc.co.jp/exhibition/IIFES2025_report.htm