Customer Voice Vol. 2 - Bathroom Remodeling Work

Would you like to enhance the asset value of your real estate property with a Before/After introduction? Using a remodeling method that is more affordable than renovations without major construction.

We will introduce examples of traditional baths that have been "remade" to look as good as new, despite the years that have passed and the aging of the bathroom, through photographs! ■ What is the remaking method? The remaking method does not involve replacing the bath or demolishing walls like a renovation project. Instead, it repairs the bath itself to finish it like new, and reuses existing tiles, thereby renovating while making the most of what is currently in use. 【Benefits of the remaking method】 ☑ Since there is no demolition, the construction period is as short as 1 to 3 days! ☑ By making the most of what is already there, there are no waste disposal costs, leading to cost savings! ☑ Since there is no need to replace the bathtub, the costs incurred are about 1/2 to 1/3 compared to a renovation! ☑ It can enhance asset value by achieving a beautiful result even within a limited budget! *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom unit
• Building renovation system
• Renovation Design

Introducing examples of non-slip flooring installation along with photos!

We would like to introduce a case study of the remodeling method based on the concept of "repairing only part of it" by Asahi Kenko. We used Takiron to carry out non-slip flooring installation. We can also repair and fix cracks, holes, and scratches in bathtubs and floor tiles, so please feel free to contact us if you have any concerns or problems related to your bathroom. 【Materials Used】 ■ Takiron ・BA881 ・LA471 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Renovate the old traditional bathroom without demolition, simply and neatly! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." The old traditional bathroom is renovated simply and neatly without demolition. It allows for an easy renewal with minimal waste and a short construction period. 【Renovation Details】 ■ Ceiling and Walls ・ PFM473 ■ Foam Panels ■ Non-slip Floor Sheet ・ Busna Floor BNF1002 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

In addition to walls, ceilings, and floors, mirrors and faucets have also been replaced to look as good as new! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the concept of "only fixing part of it." Renewing the current bathroom to a higher standard without demolishing it. The walls, ceiling, and floor, as well as mirrors and faucets, will be transformed to look as good as new. 【Renovation Details】 ■ Ceiling and Walls ・PMO017 ■ Accent wall with 2-width panels ・PGM224 ■ Non-slip sheet for the floor ・LA271 ■ Mirror ■ Showerhead *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing a case study of unit bath film work where the wall's water blisters have beautifully disappeared!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "repairing only part of it." Before construction, the lower part of the wall had swollen due to water absorption from years of use, and mold had also developed. Through the repair and reinforcement work on the wall panels, the water swelling was eliminated, and by applying a white film, a sense of cleanliness was achieved. [Construction Overview] ■ Paper and baseboard treatment - The swollen areas were scraped, and panel materials were partially applied. ■ Completion - A film was applied, and the wall's water swelling was completely removed. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing the bathroom film installation work along with photos!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "only fixing part of it." Before construction, the walls were dirty with soap scum and other residues. After applying the film, we installed the faucet fixtures, re-did the caulking, and set up the bathtub. The mirror was also moved to a position where it can be seen while sitting on a chair. 【Construction Overview】 ■ Film Application - After removing debris with a vacuum cleaner and cloth, a primer was applied. ■ Removal of Substrate and Fixtures - After sanding the floor, the faucet fixtures and bathtub were removed, and the existing caulking was taken out. - Subsequently, paper treatment was done on the walls and sanding on the floor. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

For a slip-resistant floor! Introducing examples of bathroom renovation projects!

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." We address concerns such as "the dirt and mold between the stones are noticeable and hard to clean even after scrubbing" and "it is slippery, posing a risk of falling and getting injured." 【After Construction】 ■ Cleaning becomes easier ■ The textured surface of the sheet creates a non-slip floor (allowing for safe bathing) *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.