[Demo Machine Rental] Currently offering demo machine rentals for industrial cleaners and adhesive rollers!

Rich lineup! Featuring cleaners that remove almost all fine dust【Demo units available for loan】.

This catalog introduces the hand cleaner series handled by Audio-Technica Corporation. All models feature a unique adhesive roller designed to efficiently remove dust, material strength, and other contaminants adhering to resin boards, glass, various films and sheets, metal plates, etc., thanks to its adhesive power. We offer a wide range of products, including the "HC-700 Series," which can accommodate various materials, and the "HC-700FE Series," which achieves high durability and low contamination. [Contents (excerpt)] ■ HC-700 Series ■ mini HC Series ■ HC-700CNT Series ■ HC-700FE Series ■ HC-700S Series *For more details, please refer to the PDF document or feel free to contact us.

• others

All models use a unique adhesive roller! It can remove almost all fine dust【Demo unit available for loan】.

"Techniclean" is an industrial cleaning device that employs a unique adhesive roller for all models. It aims to efficiently remove dust, material strength, and static electricity that adhere to resin boards, glass, various films and sheets, metal plates, etc., through adhesive power. The butyl synthetic rubber roller specification has minimal component transfer to materials, allowing for stable long-term use. The silicone rubber roller specification uses cleaning tape and emphasizes a cleaning method focused on stability. We offer a wide range of products. [Features] ■ Abundant conveyor options ■ Cleaning operation ■ Selectable material effective width ■ Capable of cleaning various materials *For more details, please refer to the PDF document or feel free to contact us.

• others

Static electricity removal effect of the deionizing device, achieving powerful cleaning with a rotating brush! [Dust removal / Deionizing cleaner]

The "DTC-X30 Series" is a cleaner equipped with a brush unit that removes static electricity from workpieces using a static elimination device, releasing the adhesion of dust due to static charge, and then collects the dust using a rotating brush and the suction power of a dust collector. Additionally, it performs finishing with a sticky roller to achieve more powerful cleaning and prevent early saturation of the sticky roller. Available in three sizes: DTC-230 to DTC-630. 【Features】 ■ Effective width of material: 130 to 600 mm ■ Double-sided dry cleaning with rotating brush and sticky roller ■ AC corona discharge type ■ Gear and chain drive ■ Brush rotation direction can be switched between forward and reverse *For more details, please refer to the PDF document or feel free to contact us.

• others

Reversible operation, continuous, automatic one-way, and automatic reciprocating cleaning is possible 【Dust removal/Electrostatic removal cleaner】.

The "TCT-X40 Series" is a cleaner that reliably transfers dirt caught by the adhesive roller from the workpiece to the cleaning tape, maintaining the cleanliness of the roller. The roller and tape can be easily pulled out from the main unit, allowing for simple tape cutting and roller cleaning. Additionally, with PLC control, it is capable of reversible operation, continuous operation, automatic one-way operation, and automatic reciprocating cleaning. 【Features】 - Reliably cleans dirt caught by the adhesive roller from the workpiece - Transfers it to the tape, maintaining the cleanliness of the roller - Easy tape cutting and roller cleaning - Capable of dual-side cleaning through continuous operation and automatic one-way operation - Options for combinations of butyl synthetic rubber rollers are available, increasing the variety of rubber material selections for the materials *For more details, please refer to the PDF document or feel free to contact us.

• others

Double-sided dry cleaning with adhesive rollers and rotating vibrating brushes! A cleaning device for small materials!

The "Compact Series" is a cleaning device for ultra-small materials. It compactly retains the performance of the conventional series and can instantly remove dust and static electricity from small materials, FPC, TAB, and other electronic materials. We offer models such as the "TC/DC-130," which adds a rotating brush to the "TC-130," as well as the "TC-280" and "TC/DC-280," which can accommodate a wide range of materials. 【Features】 ■ Each roller can be easily removed ■ Easy maintenance ■ Butyl-based synthetic rubber ■ Instantly removes dust and static electricity from electronic materials *For more details, please refer to the PDF document or feel free to contact us.

• others

This is a high-performance cleaning device that supports dust removal and static elimination before and after thin film processes such as thin films, LTCC substrates, and green sheets (50 microns and above).

The "TC-SUX30 series" is a cleaner that our customers have come to love as our standard model. It offers a rich variety of rubber adhesive strength and machine sizes, accommodating various materials. We have a lineup of six sizes from TC-SU230 to TC-1230. In addition to standard conveyors, we provide specifications tailored to customer needs by combining flat belt conveyors and mini conveyors. 【Features】 - The rollers are protected from floating dust as everything except the material entrance and exit is covered. - Six adhesive rollers and four cleaning rollers. - With the adoption of PLC, reversible operation is possible, as well as continuous, automatic one-way, and automatic reciprocating cleaning. - Equipped with an anti-wrapping belt mechanism that allows cleaning even with thin films. - Each model has optional conveyors: - Mini conveyor (dimensions: 400mm) - Conveyor (dimensions: 700mm) *For more details, please refer to the PDF document or feel free to contact us.

• others

Achieves powerful cleaning through static electricity removal and a rotating brush to sweep away dust, finishing with a sticky roller. [Dust/Static Electricity Cleaner]

The cleaner DTC-630 with a brush unit removes static electricity from the workpiece using an electrostatic removal device, which releases the adhesion of dust on the workpiece. It then sweeps away the dust with a rotating brush and collects it using the suction power of a dust collector. Additionally, it finishes with a sticky roller for more powerful cleaning and prevents early saturation of the sticky roller. Three sizes are available: DTC-230, DTC-430, and DTC-630. *For more details, please refer to the PDF document or feel free to contact us.

• others

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI

This time, I would like to talk a little about current measurement in the switching evaluation of power semiconductors (including power devices and power modules).

From measurement instruments to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement instruments and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will announce surprise new products!

We have updated the article on the website of the semi-custom system construction "Select Beam." When planning factories, logistics warehouses, and stores, "system construction" has become an effective means of achieving cost reduction and shortening construction periods. The rationality of system construction through thorough standardization is very high, and it is adopted in many projects. However, due to the differing characteristics of each manufacturer, many business owners find themselves wondering, "Which manufacturer is suitable for our plans?" and "Is it really optimal compared to conventional methods?" In this article, we will compare and introduce the basic knowledge of the advantages and disadvantages of system construction, as well as recommend manufacturers by purpose in a ranking format. ■ Semi-Custom System Construction "Select Beam" This is a unique method by Sakura Structure, and it is a "third option" that is less expensive than system construction. It is the most suitable method for low-rise long-span buildings such as stores, warehouses, factories, and logistics facilities, as well as high-rise buildings like hotels.