[Case Study Introduction] A must-see for those considering vibration control measures! This is an example adopted by a major global hotel for their fitness floor!

A must-see for those considering vibration control measures! Here’s an example of a case study! This is a case where it was adopted in the fitness floor of a major global hotel!

"Hanenight" is a vibration-damping rubber that excels in shock and vibration absorption, absorbing energy without much rebound even when subjected to external forces. It has been adopted in the fitness floors of major hotels operating worldwide! By combining Hanenight with other materials, we can reduce the vibration noise transmitted to the lower floors! Our strength lies in our ability to provide optimal proposals tailored to our customers' needs! For specific methods, please download the PDF for more information!

• Anti-vibration rubber
• Safety and consumables

Excellent vibration-damping rubber with outstanding shock absorption and vibration absorption! Superior vibration-damping performance in the normal temperature range (5-35°C)! Numerous achievements as an anti-vibration material! *Compliant with RoHS2 directive.

The vibration-damping rubber, which excels in shock absorption and vibration absorption, absorbs energy without much rebound even when subjected to external forces. The Hanenite GP60LE is a general-grade Hanenite that demonstrates the best vibration-damping properties in the normal temperature range. It has a higher hardness compared to GP35LE, making it excellent in load-bearing capacity. Additionally, like GP35LE, it is also highly resistant to oil, allowing for safe use around various machinery and oil applications. Its physical properties and durability are comparable to those of general rubber. It is widely adopted as a vibration-damping component in quiet and low-vibration products. 【Characteristics】 ● The rebound elasticity is 4% (measured value). ● Load capacity is approximately 2,000 kg (for a size of 10×100×100 mm with a deflection of 10%). The values may vary depending on the pressure area, so please contact us for details. ● It can be processed into various shapes. Molding similar to general rubber is possible. Cutting, machining, and punching of sheet materials are also acceptable. ● Strong adhesion to metals is possible. ● Teflon coating (vulcanized adhesion) is possible to improve surface adhesion and wear resistance. *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration rubber
• Safety and consumables

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.