~Customer Voice Vo.1~ Bathroom Remodeling Work

Would you like to enhance the asset value of your real estate property with a Before/After introduction? Using a remodeling method that is more affordable than renovations without major construction.

We will introduce examples of traditional baths that have been "remade" to look as good as new, despite the years that have passed and the aging of the bathroom, through photographs! ■ What is the remaking method? The remaking method does not involve replacing the bath or demolishing walls like a renovation project. Instead, it repairs the bath itself to finish it like new, and reuses existing tiles, thereby renovating while making the most of what is currently in use. 【Benefits of the remaking method】 ☑ Since there is no demolition, the construction period is as short as 1 to 3 days! ☑ By making the most of what is already there, there are no waste disposal costs, leading to cost savings! ☑ Since there is no need to replace the bathtub, the costs incurred are about 1/2 to 1/3 compared to a renovation! ☑ It can enhance asset value by achieving a beautiful result even within a limited budget! *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom unit
• Building renovation system
• Renovation Design

Introducing examples of non-slip flooring installation along with photos!

We would like to introduce a case study of the remodeling method based on the concept of "repairing only part of it" by Asahi Kenko. We used Takiron to carry out non-slip flooring installation. We can also repair and fix cracks, holes, and scratches in bathtubs and floor tiles, so please feel free to contact us if you have any concerns or problems related to your bathroom. 【Materials Used】 ■ Takiron ・BA881 ・LA471 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Renovate the old traditional bathroom without demolition, simply and neatly! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." The old traditional bathroom is renovated simply and neatly without demolition. It allows for an easy renewal with minimal waste and a short construction period. 【Renovation Details】 ■ Ceiling and Walls ・ PFM473 ■ Foam Panels ■ Non-slip Floor Sheet ・ Busna Floor BNF1002 *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

In addition to walls, ceilings, and floors, mirrors and faucets have also been replaced to look as good as new! Introduction of non-slip flooring installation examples.

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the concept of "only fixing part of it." Renewing the current bathroom to a higher standard without demolishing it. The walls, ceiling, and floor, as well as mirrors and faucets, will be transformed to look as good as new. 【Renovation Details】 ■ Ceiling and Walls ・PMO017 ■ Accent wall with 2-width panels ・PGM224 ■ Non-slip sheet for the floor ・LA271 ■ Mirror ■ Showerhead *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing a case study of unit bath film work where the wall's water blisters have beautifully disappeared!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "repairing only part of it." Before construction, the lower part of the wall had swollen due to water absorption from years of use, and mold had also developed. Through the repair and reinforcement work on the wall panels, the water swelling was eliminated, and by applying a white film, a sense of cleanliness was achieved. [Construction Overview] ■ Paper and baseboard treatment - The swollen areas were scraped, and panel materials were partially applied. ■ Completion - A film was applied, and the wall's water swelling was completely removed. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Introducing the bathroom film installation work along with photos!

We would like to introduce a case study of a remodeling method by Asahi Kenko that involves the concept of "only fixing part of it." Before construction, the walls were dirty with soap scum and other residues. After applying the film, we installed the faucet fixtures, re-did the caulking, and set up the bathtub. The mirror was also moved to a position where it can be seen while sitting on a chair. 【Construction Overview】 ■ Film Application - After removing debris with a vacuum cleaner and cloth, a primer was applied. ■ Removal of Substrate and Fixtures - After sanding the floor, the faucet fixtures and bathtub were removed, and the existing caulking was taken out. - Subsequently, paper treatment was done on the walls and sanding on the floor. *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

For a slip-resistant floor! Introducing examples of bathroom renovation projects!

We would like to introduce a case study of the remodeling method by Asahi Kenko, which is based on the idea of "only fixing part of it." We address concerns such as "the dirt and mold between the stones are noticeable and hard to clean even after scrubbing" and "it is slippery, posing a risk of falling and getting injured." 【After Construction】 ■ Cleaning becomes easier ■ The textured surface of the sheet creates a non-slip floor (allowing for safe bathing) *For more details, please refer to the PDF document or feel free to contact us.

• Bathroom and wash basin units
• Renovation

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

We will be exhibiting at the "Osaka Industry Exhibition 2026" held at MyDome Osaka from October 14 (Wednesday) to 15 (Thursday), 2026. We will introduce our stress check, health management system, reservation and reception system, and interview system.

We have published the latest issue (Issue 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. The feature of this issue is titled "Understanding Standard Revisions," where we introduce key points of management system standard requirements that new personnel should first understand in preparation for standard revisions. Additionally, we have included customer case studies, contributions from auditors, and information on certifications and standards, as well as the latest topics, so please take a look.

In recent years, while the size of residential spaces has been shrinking, there has been a growing demand from architects and designers for designs that "reduce lines as much as possible." However, designing spaces to appear clean and spacious by making door heights reach the ceiling or by minimizing the visibility of frames has posed challenges that require high skill levels from carpenters and significant construction time when attempted with conventional on-site construction methods. Against this backdrop, this year's Dretas has developed doors and storage fixtures that do not reveal frames, with the concept of "creating a noise-free space with empty space." ■ Base Frame (Fixtures) The structure hides the frame within the wall, achieving a refined design without the frame being visible from either side. It features a specially designed frame and concealed hinges that allow for 180-degree opening and closing. Frame widths (132mm, 147mm, 183mm) are set to accommodate wall thickness, eliminating the need for frame processing and supporting smooth installation. ■ Outset Frame (Storage Fixtures) The structure has the frame attached to the inside of the door, allowing the door and wall to fit flatly together. It can be configured for two or three panels, seamlessly blending even large wall storage into the space as if it were "just a wall." By using additional elements like the 3mm thick "Baseboard S-type," the installation becomes even more beautiful, enhancing the noise-free space.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.