★New Page Release★ Vibration Control Device "MER-SYSTEM" | IG Consulting Co., Ltd.

It absorbs about 48% of the seismic energy transmitted to the building! This is a damping device that can meet the increasing demand for disaster prevention measures with seismic resistance and vibration control.

The "MER-SYSTEM" is a vibration control damper that absorbs approximately 48% of the seismic energy transmitted to buildings. It is easy to install and provides solid support for seismic structures, making it a product that excels in the balance between construction and performance. Nowadays, we cannot predict when, how much shaking, or how often earthquakes will occur. To protect lives and property from any earthquake, it is essential to maintain seismic performance at its maximum level through "earthquake resistance + vibration control." Given the increasing demand for disaster prevention and earthquake measures, we can actively propose vibration control devices to provide peace of mind and safety to our clients. 【Features】 ○ Installation takes just 5 minutes per unit, hassle-free ○ Limit strength calculations and layout planning are conducted for each building ○ No restrictions on floor plans ○ Suitable for renovations ○ Clears the risk of oil leakage, with a 20-year product warranty ○ Long-term maintenance-free structure ★ For more details, please contact us or refer to the catalog. ★ Case studies can also be downloaded from the link below! ★ We are currently accepting simple estimates just by sending a floor plan via email.

• Vibration isolation, vibration control, and earthquake resistance construction
• Construction company
• Renovation

Our company provides 'sales support,' which makes a difference in our appeal to customers! The MER system is not just about easy installation and low prices.

What are the benefits for construction companies from adopting this method? The benefits for construction companies include the ability to expand orders through "clarification of concepts," "response to historical context," and "competitive measures." Our company recommends standard adoption to maximize these benefits gained from using vibration control methods. Additionally, we provide tools and focus on "sales support." This method allows for low-cost and hassle-free implementation of high-quality, high-performance vibration control techniques, minimizing building deformation and damage caused by earthquakes, traffic vibrations, and wind. It also achieves a long-term maintenance-free structure. It continues to maintain its performance against earthquakes that can occur unexpectedly and the repeated aftershocks that follow.

• Vibration isolation, vibration control, and earthquake resistance construction
• Construction company
• Renovation

A detailed explanation of the differences between "seismic resistance, vibration control, and seismic isolation"! A free booklet for those considering earthquake measures, available for quick learning!

In recent years, there have been many large earthquakes occurring across the country, and I want to thoroughly implement earthquake measures to protect my life and my important home. Do you all correctly understand the three types of earthquake measures: "seismic resistance," "vibration control," and "base isolation," including their meanings, effects, and costs? At IG Consulting, which deals with vibration control devices for wooden houses, we are currently distributing a free booklet summarizing the types of earthquake measures (seismic resistance, vibration control, base isolation)! Please use it to correctly understand earthquakes and consider effective countermeasures. [Here’s a glimpse of the contents of "Fundamentals of Earthquake Measures You Can’t Ask Now: Part 1"] ■ Differences between seismic resistance, vibration control, and base isolation ■ The risk of collapse with "seismic resistance" alone ■ The importance of "seismic resistance + vibration control" ■ Solution: Introduction of the vibration control device for wooden houses, "MER-SYSTEM" *You can view "Fundamentals of Earthquake Measures You Can’t Ask Now: Part 1" from the "PDF Download" link below.

• Earthquake-proof and vibration-damping equipment
• Earthquake-resistant construction method

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.