Business introduction VTR now available! [Understand ATSS in 1 minute]

Are you adequately responding to the increasing awareness of disaster prevention? During disasters, securing "water other than drinking water" is particularly difficult.

Many facilities are being introduced for the purpose of disaster prevention and mitigation measures, as well as BCP (Business Continuity Planning). It is important to have a separate water source from the public water supply and to be equipped with a sufficient amount of water storage tanks. <Disaster Prevention Measures as a Secondary Water Source> A private water supply system (water supply equipment utilizing groundwater) can also be used as a secondary water source during disasters, making it effective for disaster prevention and mitigation measures. Even during a public water supply outage, it allows for the provision of water to neighboring residents, contributing to the community. Some facilities are registered as "Disaster Cooperation Wells" or "Disaster Prevention Wells." Case Study: Ibaraki Prefecture General Hospital [Features] Water Source: Groundwater Equipment: Well + Filtration + UF Membrane Reduction in Public Water Supply Costs: Approximately 1 million yen/year Introduced using the ESCO method We welcome inquiries regarding disaster prevention and mitigation measures for corporations, businesses, factories, and medical facilities. Please feel free to contact us through "Inquiries."

• Water supply facilities
• Water Treatment
• Water Supply Facilities

With a private water supply system, it is possible to implement disaster prevention measures while reducing costs instead of spending money on disaster prevention measures.

*What is a private water supply system... It is a system that effectively utilizes deep underground water and surplus industrial water, treating it with a high-performance membrane filtration system to provide water for drinking and manufacturing purposes. It has the characteristic of being "earthquake-resistant." In fact, during the Great East Japan Earthquake, data shows that 95% of wells were usable while the public water supply was disrupted. It is very effective for disaster prevention and mitigation measures. Additionally, we accept consultations regarding the installation of water storage tanks, maintenance of water treatment facilities, and more. *Other benefits of implementation include... 1. Reduction of water supply costs 2. Water supply to neighboring areas during disasters (community contribution) 3. Improvement of water quality 4. Outsourcing of maintenance (labor-saving) and other advantages. *You can view materials with case studies from the "PDF Download."

• Water Treatment
• Piping materials (copper pipes, cast iron pipes)
• Power generation facilities

We provide one-stop solutions for issues ranging from the establishment and renewal of water treatment facilities, consultation on disaster prevention (water outage) measures, to the streamlining of equipment maintenance and cost reduction.

▶Disaster prevention and mitigation measures ▶Management and regular maintenance of water treatment facilities ▶Installation and renewal of equipment ▶Water management diagnostics by water treatment professionals and more... Please feel free to contact us. We have many successful implementations for customers in industries that rely on water, especially in factories. *For customers who already have water treatment facilities... We offer outsourcing support for regular maintenance, chemical replenishment, and emergency response. By implementing a 24-hour remote monitoring system, renewing equipment, and outsourcing emergency responses, we achieve labor cost reduction, labor-saving, and efficiency improvements. Please feel free to consult with us. *For customers considering strengthening disaster prevention and mitigation measures... Are you fully prepared for water supply disruptions during disasters? Having complete water supply facilities, water storage tanks, and reservoirs is very effective as part of a BCP (Business Continuity Plan). You can also equip your water supply facilities with a generator. Don't forget about regular maintenance after installation. *You can view materials featuring case studies of implementations in factories and hospitals from the "PDF Download."

• Water Treatment
• Piping materials (copper pipes, cast iron pipes)
• Power generation facilities

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On September 23, 2025 (Tuesday), they published a page titled "Easier to Optimize the Allocation of Management Resources!? 'Product Portfolio Management (PPM)'". 'Product Portfolio Management' allows for the optimal allocation of management resources by evaluating one's business along two axes: "market growth potential" and "market share," and classifying it into four quadrants. The page explains the benefits that can be realized by utilizing it, the two axes and four quadrants that make it up, and the associated risks. (Page Overview: Excerpts) ■ What is 'Product Portfolio Management'? ■ What can be achieved through 'PPM'? ■ Components of 'PPM' (vertical and horizontal axes) ■ Components of 'PPM' (four quadrants) ■ Two risks associated with 'PPM' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/ppm-2025-09/

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK