【Limited to 100 units】*One unit provided free of charge* Emergency sealed straight LED light fixture VCMA-V2, damp-proof and waterproof emergency LED light fixture VYAA Monitoring Campaign!!

Contributing to the all-LED lighting in industrial areas! Launching a fluorescent lamp alternative that incorporates an LED emergency light unit and a sealed emergency LED lighting fixture.

The sealed emergency LED lighting fixtures (VCMA series) comply with protection grade IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. Utilizing our unique optical design technology, we ensure efficient brightness both during normal and emergency conditions through light distribution control. Particularly during emergency lighting, the installation spacing can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of units installed and lowering initial costs. The straight tube LED lamp, which serves as the light source during normal operation, is housed in a highly sealed lamp protection cover, making it resistant to dirt and corrosion while protecting the lamp from external impacts. Since we use straight tube LED lamps, they can be replaced. During a power outage, the emergency light source is consolidated at the end of the fixture and powered by an internal battery. When installed in the same area as the sealed LED fixtures (LCMA series), the design can be unified. Additionally, a lamp monitor (green) lights up to indicate the charging status of the emergency light at a glance. If the green lamp is lit during normal operation, it is functioning properly; if the lamp monitor is off, it indicates that the rechargeable battery needs to be replaced due to its lifespan. The expected lifespan of the rechargeable battery is 4 to 6 years. Battery replacement can be easily performed in a short time while the fixture is installed.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

This single unit provides reliable lighting for both normal and emergency situations! It is a waterproof emergency lighting fixture with an IP55 protection rating, suitable for outdoor use.

The moisture-proof and waterproof emergency LED lighting fixtures (VYAA and VYBA series) comply with protection grade IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. The inherent energy consumption efficiency is 142 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof emergency LED lighting fixtures. Additionally, by offering two types of body materials—stainless steel for the LYAA series and steel plate for the LYBA series—we provide a total of 160 models with a rich variety of products, allowing you to choose the optimal model according to the installation location. Separate from the light source that operates during normal conditions, the emergency light source that lights up during a power outage is consolidated at the end of the fixture, powered by an internal rechargeable battery. When installed in the same area as the moisture-proof and waterproof LED fixtures (LYAA and LYBA series), the design can be unified. Furthermore, the installation spacing during emergency lighting can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of installations. This helps to lower initial costs during new installations or upgrades. <Product Variations> Total of 160 models Brightness: 5 types Mounting types: 8 types Body materials: 2 types Light source color (color temperature): 2 types

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

You can estimate the required number of units and brightness with your computer! Would you like to save time on lighting design?

The simple lighting calculation software "STAR LIGHTER" from Hoshi and Denki allows for easy lighting design. Additionally, it can calculate the number of fixtures and average illuminance for new installations or updates. It supports various indoor and outdoor lighting calculations, and it can also create horizontal illuminance distribution maps for a single fixture, thereby improving work efficiency compared to traditional methods. Please give it a try. 【Features】 - Capable of calculating the number of fixtures for indoor use - Easy creation of illuminance distribution maps - Conducts illuminance calculations for outdoor areas and creates horizontal illuminance distribution maps *For more details, please contact us or refer to the catalog. ---------------------------------------------------- You can also download it from our website. Please check it out below.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.