It was published in the environmental section of the industrial newspaper!

Achieving quality stabilization in PC construction! Unified management made possible by a manufacturer of anchor bolts.

Our "Reinforced Column Base Frame for PC Method" is a frame developed by utilizing the know-how accumulated over many years in anchor set construction, aimed at ensuring the installation accuracy of main reinforcement for PC methods, which has been a source of concern until now. It eliminates the hassle of adjusting the main reinforcement after concrete pouring and significantly reduces the stress during the installation of PC columns. 【Features】 ■ Stabilization of quality in PC methods ■ Unified management possible due to being an anchor bolt manufacturer ■ Consistent support from design to construction *For more details, please refer to the PDF document or feel free to contact us.

• Foundation construction
• Steel bar construction
• Steel construction

As a manufacturer of anchor bolts, we specialize in comprehensive anchor set construction, from design to manufacturing and installation!

Otsu Iron Works Co., Ltd. handles anchor bolts used in building foundations, as well as bolts and screws for construction, providing a consistent service from manufacturing to installation. We also offer same-day issuance of mill sheets and proposals related to special anchor frames and anchor sets for machinery equipment installed in production factories and plants. We achieve centralized management that complies with standards and clearly defines traceability management. [Reasons to Choose Otsu Iron Works for Installation] 1. As a manufacturer of anchor bolts, scheduling for delivery and installation is easy. 2. Total proposals for platform drawings, manufacturing, and installation tailored to the conditions of the construction site. 3. Comprehensive proposals related to complex and specialized anchor frames and anchor sets. *Please feel free to consult us regarding anchor bolts, anchor frames, or anchor sets. *For more details, please do not hesitate to contact us.

• Foundation construction
• Residential foundations
• Steel construction

A diverse lineup of anchor bolts, including stainless steel anchor bolts, foundation anchor bolts, and structural anchor bolts for construction.

Otsu Iron Works Co., Ltd. handles anchor bolts and construction bolts and screw products used in the foundation parts of buildings. The "anchor bolts" shipped under strict internal standards include a lineup of "foundation anchor bolts," "single-thread anchor bolts," and "double-thread anchor bolts." Additionally, we can manufacture stainless steel anchor bolts that are not commonly available in the market. 【Product Lineup】 ■ Foundation Anchor Bolts (Round Steel / Deformed Steel) ■ Double-Thread Anchor Bolts ■ Single-Thread Anchor Bolts ■ ABR ■ ABM *For more details, please feel free to contact us. *If you have specific requests for custom-made anchor bolts, please contact us directly.

• Other fittings
• Work tools
• others

Based on our extensive experience and track record in handling the installation of solar mounting systems on various conditions (such as walls and slopes), we offer proposals tailored to your needs!

Leave the installation of solar panel mounting systems to Otsu Iron Works! We can coordinate everything from panel layout and design to construction, so you can trust us with peace of mind. Depending on the situation, we will propose a combination of our own and other companies' products. 【Examples of Construction Achievements】 ■ Ground-mounted systems (Concrete foundation) - Truss mounting system… customizable in terms of number of tiers and angles - Lightweight mounting system… excellent cost performance and quick installation ■ Ground-mounted systems (Pile foundation) - OT screw piles… piles that utilize the strength of the ground. Easy to install and remove - Steel pipe piles… effective in areas with low pull-out strength. Can be installed even in hard rock locations ■ Flat roof mounting systems… possible at high altitudes! Custom design to fit roof shapes ■ Aluminum mounting systems (high corrosion resistance, high strength, lightweight)… high strength due to corrosion-resistant and thick structure ■ Standing seam roof mounting systems… bolt-fixed to prevent detachment due to strong winds or earthquakes ■ Parking lot mounting systems… effectively utilize parking lots as power generation sites ■ Custom-made special mounting systems… designed and constructed to meet various conditions *For more details, please feel free to contact us.

• Photovoltaic power generation system (solar system, energy-saving housing, electricity sales business)
• Solar mounting brackets and fittings (solar fittings and protective sheets)
• Parking lot facility construction

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.