Approval of the expensive new drug for leukemia, "Kymriah."

Just by applying it, you can reduce formaldehyde in your room by half! The effect lasts up to 5 years. Widely adopted by public institutions, schools, and housing manufacturers both domestically and internationally.

The "Children's Air Coat" is a high-performance polymer chemical adsorption material that captures formaldehyde, a substance that causes leukemia and asthma. (Patent No. 3742575) The captured formaldehyde is converted into a safe substance that is not harmful to the environment. The application is simple! Anyone can apply it in a short time. By just painting the ceiling, it can reduce the formaldehyde in the room by approximately half. This material is used in various countries, and many companies in each country are working together to promote "Children's Air" for the purpose of improving the air that children breathe. Numerous analyses have been conducted to verify safety through performance evaluation and by-products assessment. It is also widely adopted by public institutions, schools, and domestic and international housing manufacturers. 【Features】 ■ Reduces formaldehyde by up to 50% just by applying it ■ Reduction effect lasts up to 5 years (when 50g/m2 is applied to the ceiling) ■ There are YouTube videos and manuals available for pre-check methods and application instructions ■ Safety has been confirmed through toxicity testing *For more details, please refer to the PDF materials or feel free to contact us.

• paint

Are you properly aware of the dangers that lurk in everyday life? Information on the risks of cancer in children with low immunity and the dangers of formaldehyde is provided.

The formaldehyde contained in the air we breathe every day is a carcinogen, associated with diseases such as leukemia. It has been found that the incidence rate of cancer caused by it is very high. In 2010, the U.S. Environmental Protection Agency announced the cancer incidence rate (unit risk) for formaldehyde. In France, they have implemented a guideline that is one-third of Japan's standard. The dangers of inhaling formaldehyde present in the air over a long period have been pointed out in various countries. This document discusses the risks of formaldehyde based on various statistics. [Contents] ■ The dangers of long-term exposure to formaldehyde in the air ■ The risks of cancer for children with low immunity ■ Formaldehyde and pediatric asthma *For more details, please refer to the PDF document or feel free to contact us.

• Photocatalysts and various wall materials (exterior and interior walls, etc.)

The seismic sensor device "HK-2" detects strong tremors equivalent to a seismic intensity of 5 or higher, transmits a signal to the control room, and emergency stops the facility equipment. 【Installation Location】 Automotive parts factory 【Challenges】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensors as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to emergency stop equipment during an earthquake, and since its functionality is the same as the existing device, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensor device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

On December 23rd (Tuesday), the Japan Meteorological Agency announced the three-month forecast for January to March. During this period, there will be times when the extension of the Siberian high pressure is weak to the northeast and strong to the southeast, which may lead to the influence of cold air from the west. As a result, temperatures nationwide are expected to be nearly average from January to February. For more details, please visit our company website.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.