Recruiting Sales Agents: We handle a wide range of products, including UV protection items, various fittings, and bathroom materials!

The Insert Clip series was born from a thorough understanding of all field operations! It has innovatively evolved in reliability and work speed.

The "Insert Clip" can be easily installed by anyone with just one push. The pilot hole is standardized to 6mm for all products, which speeds up the work time compared to before. There is no need to change plugs based on the counterpart materials, allowing for compatibility with a wide range of materials. The Insert Clip was developed based on extensive knowledge of various on-site tasks. 【Features】 ■ The pilot hole is standardized to 6mm across all products, enabling efficient work. ■ Simply push it in to complete the installation easily! ■ Its elasticity allows for compatibility with 2-3 sizes, making it economical. ■ Only a drilling tool is required, making the work five times faster than usual. ■ With a pull-out load of over 20kg, it is reliable! ■ Removable and reusable. 【Applications】 ■ Plumbing: Suitable for coated resin pipes, sheath pipes, resin pipes, etc. ■ SP Firefighting Equipment: Supports Elmex, E-Lock-SP, HTSP. ■ Gas Equipment: Targets gas flex pipes and sheath pipes, as well as cable management for gas water heaters. ■ Electrical Equipment: Supports CD and PF pipes for floor wiring, as well as cables, CD, PF pipes, and cable support in shaft rooms. *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Subsidiary materials
• Safety and consumables

Isn't working upwards on the ceiling surface tough? Safe and easy-to-install insert clips!

Do you have any concerns when it comes to the construction of SP fire extinguishing equipment? - Supporting with ceiling piping is tough... - Working on an unstable scaffold takes a lot of time... The "Insert Clip" solves these problems! Since there is no need for concrete pin installation on the ceiling, hammer work is eliminated, allowing for easy and safe installation. 【Features】 - All products have a uniform pilot hole size of 6mm, making work efficient. - Just a single push to complete the installation, it's that simple! - Its elasticity allows for compatibility with 2-3 sizes, making it economical. - Only a hole-drilling drill is needed, making the work five times faster than usual. - With a pull-out load of over 20kg, it's safe! - Can be removed and reused. *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Subsidiary materials
• Safety and consumables

By considering workability in the processing of bolt holes, we eliminate labor and achieve stable vibration-damping performance!

The "Eco Pat" allows for height adjustment without the need for cutting or drilling. It significantly reduces the time required for previous tasks. It enables adjustments in millimeter increments, with one set allowing height adjustments of 10, 15, 17.5, and 20 tons. With two sets, height adjustments of 22.5 to 40 tons are possible. The basic set comes in two types, A and B. Each set contains 10 pieces, totaling 20 pieces. 【Features】 ■ Millimeter-level adjustments are possible due to its unique structure. ■ Since adjustments can be made in millimeters, slope concerns are eliminated. ■ Designed for ease of use, no drilling or cutting work is required! ■ Vertical and horizontal groove design enhances vibration resistance! *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration rubber
• Earthquake-proof and vibration-damping equipment
• Safety and consumables

By using raw materials that significantly improve long-term properties through the design of unique molecular structures, a semi-permanent lifespan is achieved!

The piping material "PE-RT TYPE II" uses raw materials that significantly improve long-term properties through a unique molecular structure design, ensuring a semi-permanent lifespan. As it is a recyclable pipe material and non-cross-linked, it can be crushed and reused. 【Features】 ■ Excellent workability With excellent flexibility at room and low temperatures, and by producing in various forms (rolls or straight pipes), it minimizes joints, making installation easy with various connection methods (heat fusion, PUSH-FIT, ring fittings). ■ Excellent hygiene Meets international hygiene standards for drinking water (FDA standards 177, 1520/NSF/ANSI 61). ■ Recyclable Non-cross-linked, allowing for crushing and reuse. ■ Excellent impact strength With a low-temperature brittleness temperature (-70°C), there is no concern about breakage due to external impacts even in winter. ■ Excellent corrosion resistance Maintains strong resistance to chemicals such as oxidants present in water, chlorine, and bacteria-fighting ingredients. *For more details, please refer to the PDF document or feel free to contact us.

• Piping and insulation
• Safety and consumables

Since it is non-bridged, it can be crushed and reused! There is no concern about being damaged by external impact even at low temperature embrittlement temperatures (-70°C).

The piping material "PE-RT TYPE II" uses raw materials that significantly improve long-term physical properties through a unique molecular structure design, providing a semi-permanent lifespan. As a recyclable piping material, it is non-crosslinked, allowing it to be crushed and reused. 【Features】 ■ Excellent Workability With outstanding flexibility at room and low temperatures, and by being produced in various forms (rolls or straight pipes), it minimizes joints and allows for easy installation using various connection methods (heat fusion, PUSH-FIT, ring connections). ■ Excellent Hygiene Meets international hygiene standards for drinking water (FDA standards 177, 1520/NSF/ANSI 61). ■ Recyclable Non-crosslinked, allowing it to be crushed and reused. ■ Excellent Impact Strength With a low-temperature brittleness temperature (-70°C), it is excellent and poses no risk of breakage due to external impacts even in winter. ■ Excellent Corrosion Resistance Maintains strong resistance to chemicals such as oxidants present in water, chlorine, and bacteria-fighting ingredients. *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and insulation
• Safety and consumables

Protect your important piping equipment from UV degradation! For outdoor residential plumbing, factory piping renovations, and more!

We offer "UV-cut resin pipes" for water supply and hot water use. We have two types available: a straight pipe type (3m) and a long length type. These pipes protect important piping systems from UV degradation and contribute to enhancing the value of homes. 【Product Lineup (Partial)】 <Straight Pipe Type> ■ UV-cut polybutene pipe (5mm/10mm/high weather-resistant coating) ■ UV-cut cross-linked polyethylene pipe (5mm/10mm/high weather-resistant coating) ■ UVC multi-tube [10t] heat-resistant type ■ Insulation material for UV-cut resin pipes <Long Length Type> ■ UV-cut polybutene pipe [60m] ■ UV-cut polybutene pipe (polybutene pipe) ■ UV-cut polybutene pipe (cross-linked polyethylene pipe) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Piping and insulation
• Piping materials (plastic pipes)
• Water and sewerage pipe fittings

The use of weather-resistant materials eliminates the need for UV protection! Achieved high durability equivalent to 20 years of actual use.

The "UV Cut TPE Twin Hose" is a high weather-resistant type of piping for bath water recirculation, suitable for systems such as recirculating water heaters, unit baths, and boilers. Since the outer layer is made of weather-resistant material, there is no need for UV protection when used outdoors. Additionally, it has passed accelerated testing equivalent to 20 years of actual use. 【Features】 ■ Heat resistance up to 85℃ ■ High weather resistance type ■ High durability ■ Excellent workability ■ No need for UV protection when used outdoors *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Piping and insulation
• Piping materials (plastic pipes)
• Water and sewerage pipe fittings

Protect pipes from ultraviolet rays! Usable for both existing and new piping! Easy installation ensures that the insulation lasts longer, providing long-lasting thermal insulation effects.

The "KISS UV One-Touch Tube" uses a high weather-resistant material for its covering, making it a pipe cover that can provide long-lasting insulation effects. With a split design, it allows anyone to easily install and process it with a one-touch method, making installation straightforward! Additionally, it utilizes a cross-linked polyethylene foam with an independent fine bubble structure, resulting in extremely low water absorption and moisture absorption, while offering excellent thermal insulation. 【Features】 ■ Blocks ultraviolet rays at the covering part ■ Easy installation ■ Beautiful finish ■ Excellent thermal insulation ■ Heat resistance up to 70° *For more details, please refer to the PDF document or feel free to contact us.

• Piping and insulation
• Safety and consumables

Can be used for end treatment of exposed piping around water heaters and outdoors! It is a type without release paper, making it easy to wrap, and it can also protect existing piping.

The "KISS UV Cut Tape (kinume)" is a high weather-resistant tape for UV protection that is easy to roll without release paper. It clears the equivalent of 10 years of the Super Xenon Weather Meter, and can be used to protect existing piping by wrapping it over PVC pipes! 【Specifications】 ■Model Number: KISS-UVKM-50 ■Release paper-free type ■Dimensions: Width 50mm × Thickness 0.2mm × Length 10m ■Box Quantity: Large box 24, Small box 4 *For more details, please refer to the PDF document or feel free to contact us.

• Piping and insulation
• Safety and consumables

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Metal components such as outdoor lighting and road signs must possess the quality to function safely over a long period in harsh environments like rain, wind, and ultraviolet rays. The foundation of high quality consists of three key elements: 1. Precision design, advanced processing technology, and appropriate material selection 2. Strict process management and skilled workers 3. A quality control system equipped with inspection systems, measurement technology, and traceability. In cutting, dimensional accuracy and smooth cutting surfaces are particularly important; in bending, angle accuracy and uniformity of shape are crucial; and in welding, joint strength and beautiful beads are essential. By organically linking these aspects, metal products that combine durability and reliability are created. For more detailed explanations, visit the Kando Industrial website! You can find the continuation through the related links.

We will introduce the latest solutions that comprehensively support everything from daily business improvements to the establishment of systems in emergencies, centered around the dialysis business support system "Seraph" and the disaster information sharing system "DIEMAS." ■ Dialysis Business Support System "Seraph" Promotes digital transformation (DX) of operations with flexible scalability and intuitive operation tailored to the field. It smartly solves facility-specific issues through multi-manufacturer connectivity and integration with other systems. ■ Disaster Information Sharing System "DIEMAS" A cloud-based platform that supports the continuity of dialysis medical care. It accelerates the visualization of disaster situations and support matching, and was selected for the 2025 "Disaster Prevention Product Catalog." On the day of the event, we will present practical applications tailored to the challenges of your institution through live demonstrations. We sincerely look forward to your attendance. 【Event Overview】 Conference Name: 71st Annual Meeting of the Japanese Society for Dialysis Therapy Date: June 19 (Friday) to June 21 (Sunday), 2026 Venue: Kobe Portopia Hotel / Kobe International Conference Center / Kobe International Exhibition Hall / World Memorial Hall Official URL: https://site.convention.co.jp/71jsdt/