Thank you very much for visiting JIMTOF 2018 in large numbers.

Compactly consolidate cables from the control panel. Flexible arrangement combinations. Also supports dustproof and waterproof features.

The "Keigrand EMS Series" is a multi-cable outlet board that can consolidate multiple cables drawn from control panels and other sources into a small area. The main material is polyamide (PA6). The dust and water resistance rating is IP65 (withstand pressure of 3kPa). Due to its split structure, the installation of connectors on both ends of the cables can be done at the harness factory, reducing the processing effort required on-site. 【Features】 EMS Type ■ Compatible with cables with outer diameters of 13.5mm or less and 18.5mm or less ■ Flexible arrangement of gasket combinations ■ Operating temperature range of -20°C to 90°C There are also multi-cable outlet boards available for other cable outer diameters. *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Ensure reliable grounding of cables! Synthetic resin cable connector.

The "E2 Type Keigrand JL10 Straight Connector E2OU**-FN16" is a connector designed to connect cables to the JL10-6A standalone plug manufactured by Japan Aviation Electronics Industry Corporation. It excels in liquid resistance, dust resistance, and durability. Additionally, we also offer the "90° Connector E29OU**-FN16 for JAE JL10 Connector." 【Features】 ■ IP67 ■ Oil resistant ■ Vibration resistant ■ Halogen-free ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Metal cable connector made of zinc alloy die-cast as the main material.

The "C2 Type Keigrand Connector for JL10 C2OU**-FN16" is a connector designed to connect cables to the JL10-6A standalone plug manufactured by Japan Aviation Electronics Industry, Limited. It excels in liquid resistance, dust resistance, and durability. We also handle couplings for JAE connectors. 【Features】 ■ IP67 ■ Compliant with RoHS 10 substances ■ Temperature range: -20°C to 90°C *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Connector for connecting Sanfrecce ROBO to DDK-made connector.

The "N2HOM※※-MD25" is a connector for connecting the Sanflex ROBO to connectors manufactured by Daiichi Denshi Kogyo Co., Ltd. 【Features】 ■ IP67 ■ Oil resistance ■ Vibration resistance (with anti-loosening feature) ■ Halogen-free ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Combination coupling for connecting Sanfureki ROBO to MS connector.

The "Combination Coupling N2KM" is a combination coupling designed to connect the Sunflex ROBO to an MS connector with a back shell. We also offer an extension hub that can be used between the model "N2KM" and the MS connector (model RHU). 【Features】 ■ IP67 ■ Oil resistance ■ Vibration resistance (with anti-loosening feature) ■ Halogen-free ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Metal cable connector for MS connector (without backshell)

The C2 type K-grant coupling C2KD and C29KD is a coupling for connecting cables to MS connectors without a back shell. It excels in waterproofness, dust resistance, and durability. 【Features】 ■ IP67 ■ Vibration resistance ■ Compliant with RoHS 10 substances ■ Temperature range: -20°C to 90°C *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

RoHS compliant! Combination coupling for connecting to K-flex.

The "Combination Coupling KMKM" is a combination coupling designed to connect K-Flex to MS connectors with a back shell. The connection between the MS connector and the coupling is tightened using an aluminum vertical motor wrench (recommended model MFT68A from Super Tool) or pliers. 【Features】 ■ Material: Zinc alloy die-cast (ZDC2) ■ Surface treatment: Electrolytic zinc plating (trivalent unichrome) ■ IP67 ■ Temperature range: -20°C to 90°C ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

RoHS compliant! Combination coupling for connecting K-flex.

The "Combination Coupling KMKD / KM90KD" is a combination coupling for connecting K-Flex to MS connectors without a back shell. The connection between the MS connector and the coupling is tightened using an aluminum vertical motor wrench (recommended model MFT68A from Super Tool) or pliers. 【Features】 ■ Material: Zinc alloy die-cast (ZDC2) ■ Surface treatment: Electro-galvanized (trivalent unichrome) ■ IP67 ■ Temperature range: -20°C to 90°C ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Combination coupling for connecting Sanfureki ROBO to MS connector.

The "Combination Coupling" is a combination coupling for connecting the Sanflex ROBO to an MS connector without a back shell. 【Features】 ■ IP67 ■ Oil resistance ■ Vibration resistance (with anti-loosening feature) *Only for N2KD ■ Halogen-free ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Metal cable connector for MS connector (with backshell)

The C2 type K-Grand Coupling C2KM is a coupling for connecting cables to MS connectors with a back shell. It excels in waterproofing, dust resistance, and durability. 【Features】 ■ IP67 ■ Vibration resistant ■ Compliant with RoHS 10 substances (excluding brass #1614) ■ Temperature range: -20°C to 90°C 【Lineup】 ■ C2KM *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

RoHS compliant! Connector for DDK connectors

The connector for CM10 manufactured by Daiichi Denshi Kogyo Co., Ltd. is designed to connect K-Flex to connectors made by Daiichi Denshi Kogyo Co., Ltd. Other accessories available include "couplings for JAE connectors" and "connectors for JAE connectors." 【Features】 ■ Surface treatment: Electro-galvanized (trivalent unichrome) ■ IP67 ■ Temperature range: -20°C to 90°C ■ Compliant with RoHS 10 substances ■ Material: Zinc alloy die-cast (ZDC2) *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

IP67 compliant! Connector/coupling for FANUC servo motors (αi, βi)

The "Connector/Coupling for FANUC Servo Motors" is a connector/coupling designed to connect K-Flex to various connectors. We offer couplings for connectors made by Japan Aviation Electronics Industry Corporation (JAE) and connectors for connectors made by Tyco Electronics AMP Inc. 【Features of Coupling for JAE Connectors】 KMKYP12-FN5 (plastic) / KMKY*-FN20 (brass) ■ Waterproof: IP67 ■ Temperature range: -20℃ to 90℃ ■ Compatible connectors: Connectors made by Japan Aviation Electronics Industry Corporation J1, J2 series 【Features of Connector for AMP Connectors】 KMBM16-FN6 ■ Made of zinc alloy die-cast ■ Waterproof: IP67 ■ Temperature range: -20℃ to 90℃ ■ Compatible connectors: Connectors made by Tyco Electronics AMP Inc. 1473393-1, 1473393-2 *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Coupling for connecting Sanfureki ROBO to JAE-made connectors.

The JAE-made connector coupling "N2KY※FN3" is a coupling designed to connect the Sunflex ROBO to connectors made by Japan Aviation Electronics Industry, Limited. We also offer a support bracket "SFPA※" to reinforce JAE connectors. 【Features】 ■ IP67 ■ Oil resistance ■ Vibration resistance (with anti-loosening feature) ■ Halogen-free ■ Compliant with RoHS 10 substances ※ For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Ensure reliable grounding of cables! Synthetic resin cable connector.

The "E2 Type Keigrand Coupling (without backshell) E2KD" is a coupling designed to connect cables to MS connectors without a backshell, ensuring waterproof specifications. It excels in liquid resistance, dust resistance, and durability. We also offer the 90° type "E29KD." 【Features】 ■ IP67 ■ Oil resistant ■ Vibration resistant ■ Halogen-free ■ Compliant with RoHS 10 substances 【Lineup】 ■ E2KD ■ E29KD *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Ensure reliable grounding of cables! Synthetic resin cable connector.

The "E2 Type K-Grand Coupling (with Back Shell) E2KM" is a coupling used to connect a cable to an MS connector with a back shell, designed to provide waterproof specifications. It excels in liquid resistance, dust resistance, and durability. Additionally, we also offer an extension hub (model RHU) that can be used between the E2KM model and the MS connector. 【Features】 ■ IP67 ■ Oil resistant ■ Vibration resistant ■ Halogen-free ■ Compliant with RoHS 10 substances *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

40% narrower than conventional products! The Y-branch connector has become more compact, making the indicator light easier to see.

The "YP4QLL-□Y3" is a Y-branch connector with a locking mechanism for connecting sensors and other devices. It can split an M12 socket plug (4-pole) into two M12 socket plugs (3-pole). It has become more compact with a 40% reduction in width compared to conventional products, making it easier to check the indicator lights. All ports can be connected simultaneously. The connector numbers can be identified by the insert color, preventing connection errors.

• others

Electric shock prevention measures, ideal for preventing foreign object contamination! Packing that protects cables.

The "Breaker Terminal Cover Packing" is a packing that is installed on the terminal cover of a breaker to prevent foreign matter intrusion and protect the cables. It is compatible with breakers manufactured by Mitsubishi Heavy Industries and Fuji Electric Device Control. 【Features】 ■ Material: NBR ■ Color: Black ■ Compliant with RoHS 10 substances ■ Characteristics: IP2X *For more details, please refer to the catalog or feel free to contact us. *The data presented is from the 31st edition of the Sankei Seisakusho General Catalog.

• others

Thin and light! A cable protector with excellent wear protection that can be used in any area.

The "Type SPPA564/565" is a self-wrapping cable protector. It is a sleeve made from flame-retardant PET monofilament and multifilament, which can be attached to cables after installation. Due to its thin and lightweight design, it can be used in any location. 【Features】 ■ Self-wrapping capability ■ Thin and lightweight ■ Excellent abrasion protection ■ Impact resistance (SPPA565) ■ Compliant with RoHS 10 substances ■ Temperature range -40°C to 125°C *For more details, please refer to the catalog or feel free to contact us. *The data presented is from the 31st edition of the Sankei Seisakusho general catalog.

• others

E2M type cable connector made of synthetic resin that can ground multiple cables.

The "E2MBG" is a multi-seal connector designed to complement the outer diameter and number of cables for the E2M5BG model. It comes with a pipe parallel male thread and can be used for knockout connections. The multi-packing can be installed after the cable has been passed through. The part number for the EM type multi-packing is selected based on the number of cables and the outer diameter of each cable. 【Features】 ■ For knockout connections ■ With pipe parallel male thread ■ Multi-packing can be installed after passing the cable *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Multi-seal connector to supplement the outer diameter and number of cables for C2M5BG!

The C2M type multi-connector 'C2MBG' is a multi-seal connector designed to complement the cable outer diameter and number of the C2M5BG model. The multi-packing can be installed after wiring. 【Features】 ■ Main material: Zinc alloy die-cast (ZDC2) ■ Surface treatment: Electrolytic zinc plating (trivalent unichrome) ■ IP67 ■ Vibration resistant ■ Compliant with RoHS6 substances ■ Temperature range: -20℃ to 90℃ *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Multi-connector with metal sleeve that can ground multiple cables!

【Features】 ■IP67 ■Vibration resistant (with anti-loosening) ■Compliant with RoHS 10 substances ■Temperature range: -20℃ to 90℃ *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Multi-packings for making connectors multi-connectors!

The E2M type multi-pack, "EMGP," is a multi-pack designed to convert E2 type, E type, and C2 type connectors into multi-connectors. *For more details, please refer to the catalog or feel free to contact us.*

• Wiring devices

Ground packing for large multi-connectors!

The EM3 type (large) multi-packing 'EM3GP' is a ground packing for the large multi-seal connector EM3BG. 【How to select part numbers】 ◇ Please specify the packing frame number and the number of holes. ◇ There is also a sleeve (model EPS-TJ) available to reduce the packing hole diameter. ◇ For holes that are not needed, please use a plug (model EPU). *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

EM5 type multi packing for making metal cable connectors E2 type, E type, and C2 type capable of grounding multiple cables in a multi configuration!

The "C2M5 Type Keigrand Multi-Connector" is an EM5 type multi-pack designed to make E2 type, E type, and C2 type connectors multi-shaped. It is available for sale both as a standalone pack and as part of the main unit. It can be installed on all Keigrand types E2, E, and C2. Please ensure that the frame numbers of the main unit and the pack match when using. If using with a sleeve, please cut the tip of the sleeve before use. For holes that are not in use, please leave the sleeve in the hole without cutting it. 【Features】 ■ IP67 ■ Oil resistant ■ Compliant with RoHS 10 substances ■ Temperature range: -20°C to 90°C *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Introducing a terminal box with excellent oil resistance and flame retardancy, compliant with protection rating IP66!

The "Resin Terminal Box HJAP" is a halogen-free product designed to house terminal blocks. It complies with RoHS and does not contain any of the 10 hazardous substances. It comes with tapping screws for mounting the back panel and DIN rail. The lid is available in light gray and transparent colors. 【Features】 ■ Halogen-free ■ Complies with RoHS 10 substances ■ Protection rating IP66 ■ Excellent oil resistance ■ Flame retardant: UL94HB *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant! Aluminum alloy die-cast terminal box compatible with cable connections.

The "HJA2M" is a terminal box made of aluminum alloy die-cast that can connect cables, K-flex, Sunflex ROBO, and pre-cut tubes. On both sides of the terminal box, there are female threads of G1/2 pipe parallel threads. Additionally, there are two grounding bases inside the terminal box and one on the back of the lid. 【Features】 ■ IP67 ■ Compliant with RoHS 10 substances ■ Temperature range -20℃ to 90℃ ■ Ivory-colored paint on the exterior of the terminal box *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant! Box with aluminum alloy die-cast M4 terminal block.

The "HJA2M" is a terminal box made of aluminum alloy die-cast with an M4 terminal block. The outer surface of the terminal box is coated in ivory color. Additionally, the terminal fixing plate features a screw-up mechanism using springs, making terminal connection work easier. 【Features】 ■IP67 ■RoHS compliant with 10 substances ■Temperature range -20℃ to 90℃ *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant! Aluminum alloy die-cast terminal box that can store terminal blocks.

The "HJA" is a terminal box made of aluminum alloy die-cast that can store terminal blocks for use. The surface of the box is unpainted. Painting is recommended to match the machine color. Holes for external connections can also be supplied upon request. 【Features】 ■IP67 ■RoHS compliant with 10 substances ■Temperature range -20℃ to 90℃ ■The lid is secured with four stainless steel ± screws *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant! Box with aluminum alloy die-cast M3.5 terminal block.

The "HJA※TDSL" is a terminal box equipped with an M3.5 terminal block attached to the standard terminal box "HJA." The terminal block is UL approved. It features a connection type with a nameplate and a PC cover. The number of terminals on the terminal block is typically determined based on the size of the terminal box, but we can also manufacture versions with a greater number of terminals as a special specification. 【Features】 ■ Made of aluminum alloy die-cast ■ RoHS compliant ■ Temperature range -20℃ to 90℃ ■ UL approved terminal block *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant! Box with aluminum alloy die-cast M3 terminal block.

The "HJA※TDSM" is a terminal box equipped with a terminal block that has an M3 terminal mounted on the standard "HJA" terminal box. The number of terminals on the terminal block is typically determined based on the size of the terminal box, but we can also manufacture versions with a greater number of terminals as a special specification. 【Features】 ■ Made of aluminum alloy die-cast ■ Compliant with RoHS 10 substances ■ Temperature range -20℃ to 90℃ *For more details, please refer to the catalog or feel free to contact us.

• others

RoHS compliant product! Grommet with knockout film to protect the insulation of cables and other items.

The "HG35RG" is a membrane grommet made of ethylene propylene rubber (EPDM) designed to be attached to knockouts to protect the insulation of cables and other materials. It is a RoHS-compliant product with a temperature range of -20°C to 90°C. 【Features】 ■ Made of ethylene propylene rubber (EPDM) ■ Compliant with RoHS 10 substances ■ Temperature range of -20°C to 90°C *For more details, please refer to the catalog or feel free to contact us.

• others

Introducing electrical materials and components that are environmentally friendly, such as halogen-free and RoHS-compliant products!

The electrical materials and components "plug" are products of Sankei Seisakusho Co., Ltd., which handles various types of cable protection tubes and accessories. We offer a lineup that includes round "pipe-type parallel male threads (made of PA)" and "meter male threads (made of ZDC)" that have been treated with electrical zinc plating on zinc alloy die-casting. 【Features】 ■ Compliant with RoHS 10 substances ■ IP67 ■ Temperature range: -20 to 90°C *For more details, please refer to the catalog or feel free to contact us.

• others

A wide variety of oil-resistant flexible cable protection tubes that comply with the Japan Machine Tool Builders' Association standards are available!

The "KEIFLEX Flexible Cable Protection Tube Catalog" is a catalog from Sankeiseisakusho Co., Ltd., a comprehensive electrical component manufacturer that covers everything from cable protection tubes to connectors and cables. It features a wide range of products tailored to various applications, including the flexible cable protection tube "Type KPF," which can withstand movement, the oil-resistant flexible cable protection tube "Type KMS," and the UL-certified flexible cable protection tube "Type KUU." [Contents Included] ■ Flexible cable protection tubes for movement ■ High oil-resistant flexible cable protection tubes ■ UL/CSA certified flexible cable protection tubes ■ Flexible cable protection tubes for EMC directive compliance *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Many achievements in general electrical work! Featuring composite material pluggable conduits!

The "PLICA TUBE Metal Flexible Conduit Catalog" is a catalog from Sankei Seisakusho Co., Ltd., a comprehensive electrical component manufacturer that covers everything from cable protection tubes to connectors and cables. It features the metal flexible conduit "Standard Plica (Non-Waterproof) PZ," which complies with JIS C 8309, as well as "Standard Waterproof Plica PV" and "Weather-Resistant/Cold-Resistant Waterproof Plica PE." 【Main Featured Products】 ■ Standard Plica (Non-Waterproof) PZ ■ Standard Waterproof Plica PV ■ Weather-Resistant/Cold-Resistant Waterproof Plica PE *For more details, please refer to the catalog or feel free to contact us.

• others

Flexible cable protection tubes made of resin, widely used for movable parts in machine tools, robots, and more!

The "Sanflex ROBO Catalog for Flexible Cable Protection Tubes Made of Synthetic Resin" is a catalog from Sankei Seisakusho Co., Ltd., a comprehensive electrical component manufacturer that covers everything from cable protection tubes to connectors and cables. It features a wide range of products tailored to various applications, including lightweight and oil-resistant flexible cable protection tubes made of polyamide, as well as flexible cable protection tubes designed to shield noise at the same level as steel conduit in compliance with EMC directives. [Main Products Featured] ■ Sanflex ROBO ■ Sanflex NT ■ Cable Insertion Tools ■ N2 Type (Standard Type) Accessories ■ Connectors for Knockout Connections *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Excellent liquid resistance, dust resistance, and durability! A sealed connector that securely grounds the cable.

The "KEIGLAND Cable Gland Catalog" is a catalog from Sankei Seisakusho Co., Ltd., a comprehensive electrical equipment parts manufacturer that covers everything from cable protection tubes to connectors and cables. It features a wide range of products tailored for various applications, including "knockout connection connectors" for connecting cables to control panels, "electrical equipment connection connectors," and "multi-packings." [Contents (excerpt)] ■ E2/E type (plastic) cable glands ■ Multi type (plastic) cable glands ■ C2/C type (zinc alloy die-cast) cable glands ■ C7 type (zinc alloy die-cast) cable glands ■ Multi type (zinc alloy die-cast) cable glands *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

A wide range of components such as lock nuts, bushings, and terminal boxes are featured!

A wide range of components such as lock nuts, bushings, and terminal boxes are featured! The "Sanparts (SANPARTS) Electrical Materials and Components Catalog" is a catalog from Sankeiseisakusho Co., Ltd., a comprehensive electrical equipment component manufacturer that covers everything from wire protection tubes to connectors and cables. It includes a wide variety of products, starting with "electrical materials and components" such as lock nuts, washers, and sheet gaskets, as well as "terminal boxes" made of resin, steel, and aluminum. 【Main Featured Products】 ■ Electrical materials and components ■ Resin, steel, and aluminum terminal boxes ■ Harness parts *For more details, please refer to the catalog or feel free to contact us.

• others

Optimal as a relay for electrical wiring of industrial machinery! A wide variety of rectangular connectors available!

The "SANCUBE Connector Catalog" is a catalog from Sankei Seisakusho Co., Ltd., a comprehensive electrical equipment parts manufacturer that covers everything from wire protection tubes to connectors and cables. It features the environmentally resistant rectangular connector "SANCUBE," which is used in industrial machinery and equipment installed in harsh environments (contamination level 3) such as machine tools and factories. 【Main Featured Products】 ■ Type 3A Insert ■ Type A Insert ■ Type B Insert ■ Type B Combination Insert ■ Module Insert *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!

The TOPPAN Group, consisting of TOPPAN Edge Inc., TOPPAN Digital Inc., and AiOi System Co., Ltd., will hold a co-hosted webinar aimed at solving challenges in the logistics field on August 20, 2025 (Wednesday). In this webinar, we will introduce a wealth of immediately useful information, including key points of the Comprehensive Logistics Efficiency Act, practical approaches to logistics DX through data utilization, and examples of improvements using subsidies. ▼ Recommended for: - Personnel facing challenges in logistics data analysis for business improvement - Logistics companies aiming to optimize warehouse operations and improve productivity - Companies interested in learning about logistics improvement cases utilizing subsidies - Companies considering the use of RFID in logistics operations ▼ Event Overview Date and Time: August 20, 2025 (Wednesday) 14:00–15:00 Format: Online (pre-registration required) Participation Fee: Free Co-hosted by: TOPPAN Edge / TOPPAN Digital / AiOi System We hope this seminar will serve as an opportunity to consider "what to start with and how to proceed" regarding the challenges faced by the logistics industry. We sincerely look forward to your participation.