We will be exhibiting a panel at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday).

[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!

The "Milling Mole Method," a ground obstacle response type mud-based thrusting method equipped with four special functions: exploration, improvement, cutting, and guidance, consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the precise cutting and removal of underground obstacles. Using electromagnetic waves, it explores metal obstacles ahead while thrusting and can also improve the ground from within the tunneling machine before and after the detected obstacles. In the event an obstacle is detected, the special telescopic device can be used to cut through the underground obstacle at ultra-low speed, allowing for continued thrusting. Additionally, a system is equipped to guide the tunneling machine to a designated position within the arrival shaft by installing a receiving coil at that location, making it the ultimate thrusting method capable of achieving high precision even when obstacles are encountered. 【Performance by Obstacle Type】 ■CASE-6 Steel Sheet Pile 3W Cutting ■CASE-7 Steel Sheet Pile 3 & H Steel Cutting ■CASE-8 Wooden Pile & Steel Sheet Pile Cutting ■CASE-9 H Steel & Existing Manhole Wall Cutting ■CASE-10 Underground Continuous Wall & Metal Object Cutting *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!

The underground obstacle-responsive mud-based propulsion method "Milling Mall Method" consists of three devices: a tunneling machine, a special expandable pipe, and a special injection pipe, which crush and discharge metallic obstacles. In the sewer construction of Section 42 in Yao City, Osaka Prefecture, the cutting and removal of a concrete pipe was carried out. Immediately after starting, the existing propulsion concrete pipe with a diameter of 1800 mm was cut diagonally over a section of 8.21 meters, which was an obstacle, and then normal tunneling was performed to reach the existing special manhole. At the existing manhole, the head was completely destroyed, and the plan was to disassemble and recover everything else. *For more details, please refer to the PDF document or feel free to contact us.*

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

This is a company introduction catalog for Yasuda Engineering Co., Ltd., a comprehensive construction industry that includes general civil engineering and building construction.

Yasuda Engineering Co., Ltd. has been a specialized company in public sewer construction, contributing to the environmental development of the local community since its establishment in 1975. We have pursued sound management and advanced technical capabilities, continuing to make steady progress. In 2001, we acquired the international standard "ISO9001" and expanded into the field of general civil engineering. We aim to be a corporate group capable of continuous innovation in comprehensive construction, including building construction. At Yasuda Engineering Co., Ltd., all employees are united in honing our technical skills and creating a new future. 【Main Business Categories】 ○ Comprehensive construction ○ Pushing construction ○ Planning, design, surveying, construction, management, contracting, and consulting related to comprehensive construction ○ Buying, exchanging, leasing, brokering, and managing real estate ○ Manufacturing, selling, and renting construction machinery and equipment, among others *For more details, please refer to our catalog or feel free to contact us.

• Site and ground investigation

From measurement devices to point cloud processing and analysis software, the latest solutions come together! We propose numerous cutting-edge technologies and products that solve on-site challenges in a one-stop manner. It's not just about seeing; it's about experiencing, consulting, and bringing it back to the field. At the venue, we will showcase the latest measurement devices and solutions, including 3D laser scanners, handheld 3D scanners, LiDAR drones, and 3DGS (Gaussian Splatting). Additionally, we will unveil surprise new products!!

We will be exhibiting at the "Green Cross Exhibition 2026 - Fair for Creating Safety for Workers." At the exhibition venue, we will have a hands-on corner for the "FF Mirror," which can be simply attached to walls to prevent collisions and address near-miss incidents. We would be grateful if you could visit the venue and share your opinions and requests with us. Thank you very much. Date: September 16 (Wednesday) to 18 (Friday). Please check the exhibition website for the different opening hours each day. Venue: Sapporo City Sports Exchange Facility Tsudoumu (Booth Number D-34) *Pre-registration is required for entry. You can register here → https://0246d18c.v3.expot-ft.net/applicants/o-add Exhibition site here → https://gce.sup-sol.net/

Although quality data and process data are accumulated, there are challenges such as "missing signs of abnormalities" and "being unable to identify the cause when problems occur." In the seminar, we will cover practical methods for quality management and cause analysis, introducing a data-driven approach to problem-solving. We will explain analytical approaches that can be utilized in manufacturing sites, from quality monitoring to cause exploration when problems arise, including demonstrations. 【Target Audience】 Quality management personnel in manufacturing Production technology and process improvement personnel Those who want to utilize process data and quality data Those who feel challenges in cause analysis when problems occur 【Overview】 1) Taking Quality Management to the Next Step - Utilizing JMP Beyond Control Charts Using quality management tasks as a theme, we will cover the flow from control charts and process capability analysis using JMP to cause exploration, as well as methods for sharing analysis results. 2) Data-Driven Cause Analysis and Quality Improvement An analytical approach to efficiently narrow down the causes of problems using process data and quality data. ▼ Details & Registration https://www.jmp.com/ja/events/seminars/discovery-seminar-series/2026/10-30

As the labor shortage becomes more serious, what kind of business design is necessary to consistently maintain cleaning quality in commercial facilities? In this webinar, we will introduce the use of cleaning robots for operational efficiency, the division of roles with staff, and case studies from both domestic and international implementations. Additionally, we will explain the features of the KLEENBOT C30/C40, the selection of models, and the process from demonstration to implementation.

We will be exhibiting at the "Crisis Management Industry Exhibition 2026" held at the South Exhibition Hall of Tokyo Big Sight. ■ Booth Number: 4F-07 ■ Booth Number: 4H-07 【Main Exhibited Products】 ▼ Portable "Long Duration Generator" 【JPG Series】 ▼ Continuously Selected "Vehicle-mounted Generator" 【G-STREAM Series】 ▼ Patent Granted by the Patent Office, Recipient of the 50th Invention Award Contribution Award, Certified Product of the Tokyo Metropolitan Government's Trial Order for FY 2023, Portable Automatic Fuel Supply System 【Intelligent Tank System】 ▼ [Disaster Prevention Product Certification] Disaster Stockpiled Fuel【Dedicated Stockpiling Gasoline】 and more Based on these, we will provide proposals related to 【Electricity and Power】 in various situations. We sincerely look forward to your visit.