[Media Information] Fujisankei Business Eye, SankeiBiz published "Strengthening Activities for the Promotion of Deep Groundwater"

Water produced by a home water system can be used for various purposes, including drinking water, washing hands, bathing, swimming pools, toilets, and car washing.

Industry: Sports Club 【Features】 Self-supplied water system using a well Equipment: Well + Filtration + UF Membrane Plant capacity: 6m³/Hr It is possible to secure approximately 80m³ of water per day during operating hours. ● You can view materials that include case studies from "PDF Download." If you wish to make an inquiry, please feel free to contact us through "Contact Us." *We offer free water source surveys, cost reduction simulations, and other consultations.

• Piping materials (copper pipes, cast iron pipes)

[Success Case Collection] We provide one-stop solutions for issues ranging from the installation and upgrading of water treatment facilities to disaster prevention (water outage) measures and the streamlining of equipment maintenance.

【Case Study】 Industry: Major Food Factory (Chiba Prefecture) ◇◇Features◇◇ Self-supplied water system using wells Equipment: 5 wells + 2 series of water treatment plants Water bill reduction rate: Approximately 70% reduction (about 80 million yen/year down) 1. Dual water supply system with 5 wells and 2 series of water treatment plants for emergency water supply measures (BCP - Business Continuity Plan) 2. Reduction of water bills through the use of 5 wells and 2 series of water treatment plants 3. Outsourcing of maintenance for the water treatment plants (labor-saving) These are the three benefits! ● You can view the materials that include the case study from "PDF Download." If you would like to make an inquiry, please feel free to contact us through "Contact Us." *We also offer free water source surveys, cost reduction simulations, and other consultations.

• Water Treatment

Draw up and filter groundwater with your own water supply system, ensuring safe, secure, and delicious drinking water. It not only reduces costs but also serves as a disaster prevention measure.

Industry: General Hospital Location: Kyoto Prefecture <Utilizing filtered groundwater as drinking water and for domestic use> In order to diversify water sources (disaster prevention measures), we have been implementing a private water supply system for over 10 years. Additionally, after introducing the system through the ESCO method, we have successfully reduced costs by more than 30% compared to conventional water supply fees. ◇◇Features◇◇ Private water supply using wells Equipment: 2 wells + filtration + MF membrane Plant capacity: 12m3/Hr ● Please feel free to contact us through "Inquiries." *Water source surveys, cost reduction simulations, and other consultations are provided free of charge.

• Piping materials (copper pipes, cast iron pipes)

Not only achieving about a 20% cost reduction with a full maintenance contract, but also realizing labor savings! Contributing to disaster prevention measures as a secondary water source.

Industry: General Hospital Location: Osaka Prefecture <Introduced for cost reduction and disaster prevention measures> It was introduced simultaneously with the complete renewal of the plant. By renewing the equipment, it also leads to cost reduction. By connecting to the emergency generator, measures against water outages are also implemented. ◇◇Features◇◇ Self-supplied water system using a well Equipment: Well + Filtration + UF Membrane Plant capacity: 25m3/Hr Reduction rate of water supply costs: Approximately 20% (about 6 million yen/year reduction) ● You can view materials that include case studies from "PDF Download." If you would like to make an inquiry, please feel free to contact us from "Contact Us." *Water source surveys, cost reduction simulations, and other consultations are provided free of charge.

• Piping materials (copper pipes, cast iron pipes)

Are you adequately responding to the increasing awareness of disaster prevention? During disasters, securing "water other than drinking water" is particularly difficult.

Many facilities are being introduced for the purpose of disaster prevention and mitigation measures, as well as BCP (Business Continuity Planning). It is important to have a separate water source from the public water supply and to be equipped with a sufficient amount of water storage tanks. <Disaster Prevention Measures as a Secondary Water Source> A private water supply system (water supply equipment utilizing groundwater) can also be used as a secondary water source during disasters, making it effective for disaster prevention and mitigation measures. Even during a public water supply outage, it allows for the provision of water to neighboring residents, contributing to the community. Some facilities are registered as "Disaster Cooperation Wells" or "Disaster Prevention Wells." Case Study: Ibaraki Prefecture General Hospital [Features] Water Source: Groundwater Equipment: Well + Filtration + UF Membrane Reduction in Public Water Supply Costs: Approximately 1 million yen/year Introduced using the ESCO method We welcome inquiries regarding disaster prevention and mitigation measures for corporations, businesses, factories, and medical facilities. Please feel free to contact us through "Inquiries."

• Water supply facilities
• Water Treatment
• Water Supply Facilities

By entrusting maintenance to water treatment professionals, you can achieve efficiency and labor savings. We are also accepting inquiries about 24-hour remote monitoring systems!

We provide outsourcing support for regular maintenance of water treatment facilities, chemical replenishment, and emergency response. By implementing a 24-hour remote monitoring system, renewing equipment, and outsourcing emergency responses, we achieve labor cost reduction, labor-saving, and efficiency improvements. Please feel free to consult us. ● You can view detailed materials that include case studies of the "private water supply system" we handle by downloading the PDF. We encourage you to read it. If you wish to make an inquiry, please feel free to contact us through the "Contact Us" section. *We offer free consultations for water source surveys, cost reduction simulations, outsourcing, and labor-saving inquiries.

• Water Treatment
• Power generation facilities

We have newly added the "RB Catcher," a log capture device installed on impermeable sediment control dams in flow sections, to our product lineup and have started sales. The RB Catcher is directly attached to the upstream part of the impermeable sediment control dam to enhance log capture functionality. Unlike the conventional straight arrangement, it features a structural layout that creates gaps between units, ensuring that water flow is maintained without causing blockages after capturing logs. This allows for the reliable capture of subsequent logs without overflow, preventing damage downstream. By adding this new log capture device to our lineup, we will flexibly respond to various needs in the field.

We have introduced Majesta Fragrance to a luxury lounge establishment located in the Kitashinchi area of Osaka. This time, we have adopted "Majesta Fragrance" as part of the in-store space branding. The moment you open the door, you are enveloped in a delicate and sophisticated scent, as if wrapped in high-quality silk. The elegant atmosphere reminiscent of a luxury hotel lounge invites customers into an extraordinary world. Majesta Fragrance has been implemented as an invisible scent branding in many establishments and companies. For scent production in the Kansai area, please leave it to Majesta Fragrance. If you are interested in scent production, please feel free to contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.