We exhibited at the Sewerage Exhibition '18 in Kitakyushu City, Fukuoka Prefecture!

[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!

The "Milling Mole Method," a ground obstacle response type mud-based thrusting method equipped with four special functions: exploration, improvement, cutting, and guidance, consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the precise cutting and removal of underground obstacles. Using electromagnetic waves, it explores metal obstacles ahead while thrusting and can also improve the ground from within the tunneling machine before and after the detected obstacles. In the event an obstacle is detected, the special telescopic device can be used to cut through the underground obstacle at ultra-low speed, allowing for continued thrusting. Additionally, a system is equipped to guide the tunneling machine to a designated position within the arrival shaft by installing a receiving coil at that location, making it the ultimate thrusting method capable of achieving high precision even when obstacles are encountered. 【Performance by Obstacle Type】 ■CASE-6 Steel Sheet Pile 3W Cutting ■CASE-7 Steel Sheet Pile 3 & H Steel Cutting ■CASE-8 Wooden Pile & Steel Sheet Pile Cutting ■CASE-9 H Steel & Existing Manhole Wall Cutting ■CASE-10 Underground Continuous Wall & Metal Object Cutting *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!

The underground obstacle-responsive mud-based propulsion method "Milling Mall Method" consists of three devices: a tunneling machine, a special expandable pipe, and a special injection pipe, which crush and discharge metallic obstacles. In the sewer construction of Section 42 in Yao City, Osaka Prefecture, the cutting and removal of a concrete pipe was carried out. Immediately after starting, the existing propulsion concrete pipe with a diameter of 1800 mm was cut diagonally over a section of 8.21 meters, which was an obstacle, and then normal tunneling was performed to reach the existing special manhole. At the existing manhole, the head was completely destroyed, and the plan was to disassemble and recover everything else. *For more details, please refer to the PDF document or feel free to contact us.*

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

It's not surprising if anything comes out; the entire site is an example of land reclamation excavation.

This document introduces the construction achievements related to the new pipeline installation work at the Oi Thermal Power Plant. This project involved the installation of new pipelines within the Oi Thermal Power Plant, and due to the site being filled, it was uncertain whether sheet piles or H-beams would be encountered; it was possible to find concrete debris or metal fragments, among other things. In reality, only pine piles and what appeared to be concrete debris from some base were encountered, and the use of expansion jacks was not necessary. 【Construction Case】 ■ Project Name: New Pipeline Installation Work Related to Oi Thermal Power Plant ■ Client: Tokyo Electric Power Company Holdings, Inc. ■ Contractor: Wakachiku Construction Co., Ltd. Tokyo Branch ■ Pipe Diameter: 1350 mm ■ Pushing Length: 190.5 m ■ Soil Type: Clayey Soil ■ N Value / Gravel Ratio / Maximum Gravel Diameter: N=2–10 G=0% φmax=100 mm ■ Construction Period: August 2015 to October 2015 (2.5 months) ■ Type of Obstacles: Insurance Method, Pine Piles, Concrete Debris, Wood Pieces *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Leave the construction of long distances and sharp curves in small-diameter propulsion to the jet method!

The "JAT Method" is a thrusting method that enables long-distance and sharp curve construction in small-diameter thrusting. Instead of measurements from the ground, it uses a CCD camera sensor for underground surveying from the starting pile, which means it is not affected by buried objects, electric wires, or tracks. The method for curve measurement involves inserting multiple CCD camera sensors into the pipe and measuring targets located at the front and back of the machine with the CCD camera sensors. The image information sent from the sensors is processed by a PC on the ground to quickly calculate the discrepancies between the plan and the construction. [Features] ■ Compatible with deep thrusting ■ Simple structure and easy handling ■ Three-dimensional traverse surveying using high-resolution CCD camera sensors ■ Roll conveyor rail (patented) ■ Capable of handling a wide range of soil types *For more details, please refer to the PDF or feel free to contact us.

• Sewerage facilities
• Waste treatment facilities
• Site and ground investigation

We will be exhibiting our kintone plugins "Mojitori" and "StockNaut" at the following event. 【kintone Solutions Day Osaka】 Date: July 7, 2026 (Tuesday) 13:00 - 17:30 Venue: MyDome Osaka 1st Floor Exhibition Hall (A) Cost: Free kintone Solutions Day is an event where kintone plugin and integration manufacturers gather, allowing participants to experience the extensibility of kintone all at once. You can compare and consult on the latest solutions that further evolve kintone, such as business efficiency and system integration, through actual demos and direct explanations! ♦ Recommended for: - Those who find the standard features of kintone insufficient - Those who want to speak directly with plugin manufacturers - Those who want to consult about SaaS business Following the event held in Tokyo in February, this time it will be held in Osaka. We look forward to your visit!

We will be exhibiting for the first time at the "7th Kyushu Heat Countermeasure Exhibition" held on June 24 and 25. We will showcase Sanko's summer products, including refrigerated clothing, neck coolers, and belts that turn into fan-equipped wear. This will be a valuable opportunity for you to actually handle the products. We will also be displaying the 【Electric Stair Cart】, which allows for easy movement up and down stairs while carrying loads. We welcome any inquiries or consultations regarding its introduction. We look forward to your visit. 7th Kyushu Heat Countermeasure Exhibition ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Date: June 24 (Wednesday) and 25 (Thursday), 2026 Time: 24th 10:00 AM - 5:00 PM, 25th 10:00 AM - 4:00 PM Venue: Marine Messe Fukuoka Booth Number: AM-16

Daitō Shikō Co., Ltd. will be exhibiting at the "5th Oshi Katsu EXPO Summer" held at Tokyo Big Sight from June 24, 2026 (Wednesday). At the exhibition venue, we plan to showcase popular sticker albums, foil-pressed goods, items usable at collaboration cafes, pull-back cars, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

Toby Technology Co., Ltd. will be exhibiting at the "Problem-Solving EXPO 2026 Small and Medium Enterprises Tech Fair in Kyushu 2026" held at the Kitakyushu Messe. At our booth (T-04), we will introduce skill inheritance and education using eye tracking (gaze measurement). Eye tracking visualizes the "intuition and tips" of skilled workers, contributing to the reduction of training periods in visual inspections and minimizing the oversight of defective products, as well as subsequent education and evaluation. On the day of the event, we will have a wearable eye tracker (glasses-type gaze measurement device) available for demonstration. Depending on your challenges and interests, we will introduce the optimal ways to utilize this technology, so please feel free to stop by and consult us if you have any questions or concerns. We sincerely look forward to your visit. <Visitor registration here> "Problem-Solving EXPO 2026 Small and Medium Enterprises Tech Fair in Kyushu 2026" https://kyushu-tf.solution-expo.jp/

Have you ever felt that the typical nurturing process—from awareness to interest, consideration, negotiation, and order—just doesn’t quite resonate with you? In this webinar, we will address those who feel: - The company demands "short-term results quickly," but there’s no way to consult on methodology. - There isn’t enough internal persuasive material needed to implement "mid- to long-term measures" like awareness and recall. - They struggle to balance "short-term" and "mid- to long-term" efforts. - The general nurturing process cannot be directly applied to their own company. We will explain "How to Start BtoB Marketing." ■ Seminar Content: - An overview of marketing for products whose consideration timing cannot be controlled due to customer circumstances. - An approach to the semi-aware segment that is easy to involve stakeholders and quickly achieve small results. - A sustainable method for planting the seeds of recall to achieve mid- to long-term results without strain. - How to respond to the situation where 92% of customers contract from the initial consideration list. We will provide information that can help you build a BtoB marketing framework and achieve new customer acquisition. We hope you will join us.